How often a machine is cleaned, which procedure to take, detergents to utilize always depend on some factors. These factors may include what kind of product is manufactured or processed, the type of machine, and the environment's conditions around it. In most cases, you will find manufacturers have already given instructions on how that machine you want to purchase or already possess is supposed to be cleaned.
If you consider buying a rotary pouch filling and sealing machine, or you already own it, you must know how to clean it. Cleaning it is among many maintenance practices you can do to ensure the good functioning of the rotary sealer.
The first thing you will need to do before you wash your rotary filling and sealing machine is to turn off and disengage the power. You must isolate and lock out the sources of energy of the device. This way, you will be able to avoid any electrical accidents. The next thing is pressing the position button below the HMI touchscreen to stop your rotary sealer if it's working. Check whether the emergency stop button is off and if not, you can press it on. Ensure the manual load switch on the electrical cabinet is off. You can open the safety guard doors in case of anything happening; you will be able to get out of the cleaning place safe and sound. Ensure you make use of protective glasses to keep your eyes safe.
Now that you have ensured you will be safe from anything happening, you can start cleaning the machine. You can begin by removing any pouches and products from the pouch packing machine. If it's possible, ensure that you separate the electrical control part from the device. Using compressed air or low-pressure water, you can eliminate garbage and item buildup from the machine. You can also utilize detergents or the recommended cleaning solution by the manufacturer.
Immediately after cleaning, rinse your machine with clean water. However, ensure the bag packaging machine air is dry because this will make the film buildup. Also, flush using a low-pressure water hose that is moving from top to bottom. However, ensure that any component that shouldn't get wet doesn't.