marshalledgar
500+ Views

OMG: Lola Gem Pumps

Brides, I have found your 'something blue!'
Luxury (and whimsical) shoe designer, Sophia Webster, has fully stocked her much-obsessed over Lola Gem pump.
The ivory satin pump is embellished with fantastic rhinestone gems in shades of turquoise with the "Wifey for Lifey" emblazoned on the soles.
Lola Gem Pups
$485
4 Comments
Suggested
Recent
@marshalledgar well it is absolutely adorable !!!! <3 <3 <3
That's part of Sophias trademark bridal collection @brinjsn
<3 !!!! Especially the "Wifey for Lifey" on the bottoms!!!
@brinJSN Aren't you GAGGING over these?!?!?!! I LOVE THEM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Cards you may also be interested in
DIY Missoni Chevron Shoes
Step 1: Gather supplies. One pair of white canvas sneakers Ruler Manila file folder or other stiff paper Pencil Scissors Fabric markers in various colors (ones with both a thick and thin tip are best) Step 2: Using the ruler, draw a straight line near the edge of the manila file folder. Step 3: Draw a second line a half-inch down from the first one. Use the ruler to make tick marks at every half-inch interval on both lines. Step 4: Next, create a zig-zag pattern inside the two parallel lines by connecting every other tic. For example, start at the bottom left-hand corner of the lower line, and connect to the second tic mark on the upper line. Connect the second tic-mark on the upper line to the third tic mark on the lower line, and so on. Step 5: Now that you've just created all of those triangles, cut away the lower row of them (sorry!). You should be left with what looks like a row of teeth at the bottom of the folder. Feel free to use this template to create a shark or bear costume for Halloween. Step 6: Okay, now take out your plain canvas shoes and remove the laces—you don't want to color over them, nor do you want to try to color around them. Step 7: Position the template onto the toe of the sneaker. You'll be working your way from the front to the back of the shoe. Position the template wherever you like it best, but we felt it was easiest to keep things lined up by having the point of one triangle in the center of the shoe. Step 8: Move the template back and trace another row of triangles, making sure all of the points more or less match up with the previous rows. To get a true Missoni look, vary the spacing of the template—there's no right and wrong with this, so feel free to have lots of thin rows and then one giant row, followed by a medium and small row, and so on. Step 9: Okay, now it's time for the fun part! Grab your fabric markers and start coloring in the rows, making sure that each row is a different color. The colors don't have to be spaced evenly or in any sort of pattern (but go for it if you want!), so feel free to switch it up as much as you'd like. If your markers have differently sized tips, use the thin edge to outline the rows, and the thick to fill them in. Step 10: To make your kicks look extra-polished, make sure you color the inside rim of the sneaker! You've come all this way, so don't skimp out on this step. Step 11: Now, it's time to color the tongue of the sneaker. This part can be a little awkward since it's hard to get a good angle, but don't worry, since you only see a little bit of the tongue, you don't have to be too accurate. Just do your best and color the parts you can see, trying to match the colors and patterns from either side of the shoe. Step 12: All that's left to do now is lace up the sneakers and take them for a test drive! Your friends are going to be so enamored with your DIY skills, that they're going to try to get you to make them a pair. Beware!
DIY Sponge-Dyed Ombre Sneakers
You'll need: • Gloves • Syringe (1 per color) — Optional but recommended :) • Rubber Cement — Optional • Masking Tape — If you don’t have rubber cement • Sponge • Popsicle sticks for mixing the dye • Fabric Dye (Liquid or Powder) • Paintbrush (Make sure it’s clean — I suggest using a new brush; just buy the cheapest one) • Plastic Cups for mixing dye • Hot water • Newspaper or anything to cover your work area • Wear clothes you don’t mind having fabric dye spilled or splattered on Step 1: Bring out your sneakers :D (old or new) Step 2: Cover all the rubber side strips with Masking tape or Rubber Cement to block out the dye from adhering to the rubber. You can remove it afterwards or wait for it to wear off We won’t be dipping the entire shoe in the dye mixture so there’s no need to cover the soles. Step 3: Now you have to wet/soak your sneakers (canvas part only) with HOT water. You can do so by using a paintbrush first then soaking it more with a sponge. Step 4: Make your dye mixture Step 5: Once you’re done mixing your dye mixture (darkest) ~ take out your atomizer and syringe (optional). I think the smaller atomizers will work best for sneakers as it won’t cover a large surface area. For bigger materials such as shirts, you can use the bigger atomizers (Yes, the one you use when ironing clothes) Step 6: Use your sponge to wet your sneakers again :) Make sure to cover the whole area~! Spray the back part of your shoe with the dye bath. Careful not to over-spray :) You can always spray again :D Step 7 : Now take your brush, dip it in your hot water and carefully blend out your dye (Colored to white areas of your shoe). Yes, we are now creating the ‘ombre effect’. Use more water as you get nearer the middle part of your shoe or wherever you want the ombre to end (white). Afterwards, clean your brush and dip it again in water (clean hot water). Now carefully brush water starting from the WHITE part of your shoe to the lightest ombre — this is to remove or make any hard lines more subtle. Repeat steps until you’re satisfied with your ombre. If you’re using only one color, you can stop here and let your sneaks dry :) Step 8: If you’re planning to have 2 or more colors, simply repeat steps 4 - 7.
DIY Glitter Shoes!
What you’ll need: -Any pair of flats, canvas shoes, or loafers -Mod Podge (available at craft stores) -Glitter (gold, silver, etc.) -Newspaper & a plate or bowl -Foam brushes or paint brushes -Clear coat spray paint (to make sure the glitter stays on!) First, you’ll want to stuff newspaper down into the shoe so that no glitter or glue gets inside! I removed the laces from my shoes also, just to make sure they didn’t get all gunked up. Pour some of the mod podge onto a plate or into a bowl. I used a paper plate because they are disposable and it was easier to use a flat surface to get a thin coating of the mix. Next, you’ll want to pour some glitter into the mod podge. You’ll want about half as much glitter as there is mod podge, because you don’t want the mix to be too thick. Mix the glitter and mod podge together using one of your foam brushes. Then get ready to paint your shoes! Paint a thin coat of the mix onto the shoe. Make sure that it is smooth and not too chunky because it will dry that way! I didn’t want to paint the whole shoe, so I only painted the front and the back, leaving the middle white. Once you have the mod podge mix on the shoe, you’ll want to pour a SMALL amount of glitter onto the spots you just painted. This just gives the shoe a little extra glitter, and makes sure that there are no white spots. When you’re finished adding the glitter to the shoes, you’ll want to clean off any extra glitter that is on the shoe because you don’t want it to be stuck there when you spray the clear coat. I used a damp paper towel to clean off the edges and the bottom. Last but not least, spray your shoes with a clear coat spray paint. This makes sure that the glitter stays shiny and does not fall off the shoes. Make sure to read the directions on the can and do not get it on your skin or in your eyes. When this is done, you’ll want the shoes to sit and dry overnight to make sure that they are ready to wear.
How-To: Boho Braided Half Crown
The Beauty Department just published this super cute hair tutorial that I had to share with my gals and my brides on Vingle! As you can see, it's super easy and straight forward in the instructions. Try this out and let me know what you think! 1. Wave hair. 2. Gather and section off the top half of your hair (temple to temple) 3. Roll and clip this section up and away. 4. Next section off one inch sections on your right and left side from your hairline, near your temple (this is the area slightly above your ear). Braid this section vertically down. 5. Backcomb the braid instead of tying it off. Repeat on both sides. 6. Bring braids forward towards the face and unclip the top section of hair (step 3). Allow this section to fall and blend with the bottom half of your hair. 7. Take both braids from each side. 8. Bring these braids to the middle back of your head, cross them over each other. 9. Using a bobby pin that blends with your hair color, fasten both braids. 10. Now make one inch sections below your first set of braids on each side. Repeat the first set of braids we did (Follow steps 4 and 5 ). Make sure the braid is directly under your last braids. 11. Once both sides are braided bring hair around to the middle back of your head and cross them over each other. 12. Using a bobby pin that blends with your hair color, fasten both braids. 13. Once everything is fastened adjust your curls on the bottom half and style using a texture spray. 14. Finish off waves and look with a weightless protectant. 15. Make any further styling adjustments to your look. and Enjoy an easy DIY half up boho braided up-do. Photo & Post by Carachele Tyvan