4 years ago
PiuPiuPENGUIN
in English · 12,882 Views
likes 33clips 11comments 2
How to make a Princess Peach Crown :3
For the Tutorial read the text :D Materials used: - Worbla - Resin - Transulent glass paint in pink and blue - Spray-Putty - Brown acrylic paint - Gold decoration spray paint - Matte varnish - Sticker crystals and pearls - Air dry clay - Sandpaper - Brush - For the base I used Worbla, but you can also use wonderflex (or other types of thermo plastic) or foam. I attached the edges on each other and shaped the Worbla by using hot water. The material will stick on each other by heating it up. - With a soldering iron I added the edge on the crown. - To smooth out the crown I have sprayed spray putty on it, let it dry for a few hours and sanded it slightly. - I casted the gems on the crown with clear resin. I used a drop of transulent glass paint to color them and a base mold for resin which you can find in craft stores. - After the resin was fully harded out after a day, I glued mirror foil on the backside and then on the crown with super glue . I used air dry clay for adding/ finishing the edges. - I sealed the resin stones with masking tape and spray painted the crown gold and let it dry for a few hours. - I used very small sticker crystals and pearls so I didn't need to use glue to put it on the crown. This is faster and saver to avoid glue being visible. - For the worn out look I used brown acrylic paint which I thinned out with water. I used a piece of cloth and rubbed it over the crown until the crown was fully covered. I used a clean cloth to rub off the paint, the paint will remain in the edges of all the details which gives the crown a more classic look. You can also use the dry brushing technique for this result. - For sealing everything I used 2 layers of matte varnish. And it is done! Tips: - For being able to shape Worbla you can also use a hairblower, heatgun or oven. - Be careful with the soldering iron, you can make holes in the material with it easily. - If there will be some paint on the resin stones, don't worry you can get rid of it with acetone/ nailpolish remover. - Drill smal holes in the crown to be able to sew the crown on a wig.
2 comments
Wow! That actually looks pretty legit!
4 years ago·Reply
@JohnLee I know right? Even though it looks so easy to make, I bet at least a few hours of work went into this crown :)
4 years ago·Reply