Cards you may also be interested in
Terrarium Side Table - Easy DIY
From the looks of it you might think, TOO HARD, FORGET IT. But you'd be wrong because this is actually a really easy DIY project that can really enhance your indoors by bringing the outdoors in. Supplies Needed: -4 sheets of plexiglass that are 24 x 18 inches -2 sheets of plexiglass that are 24.5 x 24.5 inches or larger -weld-on #4 and applicator bottle with needle -1 sheet 24.5 x 24.5 inches OSB or plywood -(2) 24.5 inch 1x2 wood pieces -(2) 26 inch 1x2 wood pieces -one 1 inch dowel for legs -4 screws -plexiglass knife (if needed) -saw (if needed) -drill -spray paint -terrarium insides (gravel or river rock, moss, manufactured mulch, faux succulents) This is an easy project for those who know there way around the DIY world. If you are new to DIY, then this is going to be a bit more advanced than you might be used to or come to expect. Also, expect to spend a good $200 on this project, depending on what you already have on hand and what you need to buy. Step One: Assemble the base of your terrarium. You can see from the photo above how I (very simply) put mine together. Basically you're going to make a short table with a lip that is sized to fit your plexi box inside. Step Two: Assemble your terrarium box. You'll be using electrical tape and the weld-on #4 to fuse the corners together. These sheets can be cut down by you or the hardware staff. They also come in different pre-cut sizes. Step Three: Create the top piece by fusing two plexi sheets (one smaller than the other) together. Step Four: Fill any edges of your base with wood filler and then paint the base. Step Five: The funnest part of this project is the creation of the contents. Have fun with rocks, plants and
DIY peppermint spoons
This is a perfect item to use in your hot holiday drinks — use the peppermint spoon to stir the drink and then the peppermint will melt into your drink. How amazing is that? This DIY tutorial comes from the creative people at Princess Pinky Girl. Materials For this project, you will need: -- Hard peppermint candies -- Oven -- Spoon molds (you can buy these at a craft or baking store or online here) -- Plastic bag -- Food/candy crusher (you can also use a hammer) -- Chocolate chips and sprinkles (optional)You can find most of these items at a craft or grocery store. Form the spoons Put a lot of hard peppermint candies in a plastic bag. Then, use the food crusher or hammer to crush the candies into smaller pieces. Put the smaller pieces into the mold, as shown in the picture above. Make sure there are a lot of peppermint candies in the handle as this section will break easily if there is enough peppermint candy there. Melt the peppermint Melt the peppermint candy in the oven at 300 degrees for about 10 minutes. Keep an eye on the candy to make sure that it melts all the way, but doesn't bubble. If any of the spoon looks thin, you can add some more peppermint candy pieces and stick it back in the oven. Let the spoons cool completely before removing from the molds. If you need more help making the peppermint spoons, check out this video with simple step-by-step instructions. If you want to add some extra flair to your peppermint spoons, you can add melted chocolate and sprinkles to your spoons. Use the peppermint spoon in your favorite holiday drink and enjoy! For more DIY projects for food items, check out the "DIY FOOD" collection!
오묘한 매력을 가진 갤러리 ‘샌드위치 apt.’ 그룹전 <사적인 움직임> 오픈
성수동 연무장길 필수 코스가 생겼다. 포토그래퍼 장덕화와 크레이티브 디렉터 오지영이 전시를 주축으로 다양한 프로젝트를 시도하는 갤러리 ‘샌드위치 apt.’를 오픈했다. 샌드위치 패널로 지은 가건물의 상태에서 영감을 얻어 이름 붙여진 ‘샌드위치 apt.’는 최근 SNS 핫플레이스로 급부상한 성수동 연무장길 초입에 나지막이 자리 잡고 있다. 참여 작가의 취향은 분명하나 특별한 색을 가진 작품을 담담히 소개하고자 하며, 작품들이 주는 흡입력이 관람하러 온 사람들과 자연스럽게 유대감을 형성될 수 있도록 기회를 제공해 주는 것이 ‘샌드위치 apt.’의 목적. 입구에서부터 느껴지는 아티스틱한 분위기와 갤러리 곳곳에 숨겨진 무심한 듯 쿨한 인테리어가 발걸음을 찾은 이들에게 잔잔한 재미를 선사한다. ‘샌드위치 apt.’가 선보이는 첫 전시, <사적인 움직임은>은 그룹전으로 ‘플롯(PLOT)’, ‘파라다이스(PARADISE)’의 박상호, ‘글라스 랜드스케이프(GLASS LANDSCAPE)’의 이수진 작가가 스타트를 끊었다. 먼저, 작가 박상호는 많은 시간을 현실과 비현실에 대해 인식하고 자문한다. 색과 패턴 그리고 수직과 수평의 구조적인 형태에 대한 고찰을 미디어아트와 구조물 등으로 풀어낸 ‘플롯’, ‘파라다이스’도 그렇다. 그중 작품 파라다이스는 하늘과 지평선 그림의 종이를 배경으로, 석양과 야자수가 있는 바닷가 모형의 풍경이 영상으로 나타나며 신비로운 무드를 자아낸다. 이는 매체를 통해 파라다이스로 각인되어 이미지가 모니터 속 실제와 허구의 두 가지 구조로 표현되는 것. 허구적 현실의 재현을 통해 갖게 된 우리의 지각과 인식에 대한 이야기를 전달하고자 한다. 작가 이수진은 아슬아슬하거나, 어렴풋한 것, 한 가지로 정의할 수 없는 모호한 결말이나 불확실한 연결성 등에 가치를 둔다. ‘글라스 랜드스케이프’는 자투리 유리를 재활용해 도시화와 산업화에 따른 징후와 현상을 조명한 작품. 잔혹하고 날카로운 공포의 감각을 주는 유리 조각은 달리 생각하면 연약하고 부서지기 쉬운 잔디나 신비로운 결정체처럼 보인다. 거대한 도시의 이면에 숨은 또 다른 도시의 풍경을 간접적으로 표현했다는 점에서 인상 깊다. 앞으로가 더 기대되는 ‘샌드위치 apt.’의 첫 전시 <사적인 움직임>은 오는 7월 31일까지 이어진다. 샌드위치 apt. 서울 성동구 연무장길 114 3층 더 자세한 내용은 <아이즈매거진> 링크에서
Make This Shelf In 1 Hour - DIY
Totally serious! Yes--you can make this cute shelf with cute curves in about an hour. To add color to this woodworking project, all you have to do is get spray paint, sealant and wait for it to dry, which means it won't be done in an hour. Maybe 2-3 hours. Supplies Needed: -DPI board (you only need one sheet) -a pine board (1 x 6 x 8 would be just enough) -10 wood screws -paint & polyurethane -saw tooth picture hangers (optional) Tools: -table saw (you could get away with just using a hand saw) -drill -square -2 clamps (or a pair of helping hands) Step One: Cut 2 strips of DPI (each 6" x 48") and one board at 6" x 28 11/16". On either end of those pieces, measure and mark in 3 inches. Step Two: From here, it's just a matter of taking one side of each of the DPI pieces and putting them together, overlapping by 3 inches, then clamping them together. (Clamp on the end of each piece. You want room to screw into the middle shelf.) Make sure to keep the shiny side on the outside. After one side is clamped,very carefully, bend the two unclamped ends together, overlapping by 3 inches, and then clamp those. TIP: DPI will bend, but when you are bending it, do it slowly and without applying too much pressure to one single section, or it will snap. Step Three: Once the circle is formed, and if you did your math right, the center piece should fit nicely. From there, you can hold boards up wherever you want them and mark. Then cut. If the piece hits right in the middle of the circle, you won't need to cut angles. Step Five: After the pieces are cut and looking good in their respective spots, hold a speed square up to them while screwing them in... gotta keep the wonkiness to a minimum. Step Six: Finally, you can just put a screw or nail in the wall, hang the shelf on it, and call it a day. Or spend 5 more minutes and put a couple saw tooth hangers on the back for extra stability. Now that you're in the woodworking phase of DIY, click here to see even more!
4
Comment
Share