VickieAnimeFan
500+ Views

Two Sides

I am afraid,
I can no longer contain,
The part of me that's insane,
And now that you know,
Will you go?



Comment
Suggested
Recent
insanity it's good.. all insanity is is creative energy of the mind. embrace insanity
Cards you may also be interested in
Everything You Need to Know MDR Checklist in 2021
With the inception of the European Medical Device Regulation, the medical sphere received something unique. However, the deadline for ensuring EU MDR’s compliance is imminent. As a matter of fact, these regulations require healthcare equipment manufacturers to embrace technological revolutions. By this move, the manufacturers can enable and improve traceability, besides devices’ safety management within the EU. Furthermore, the regulations bring an EU identification system for healthcare devices on the basis of UDI or Unique Device Identifier. So, before understanding the MDR checklist, here are the scopes and duties. What Are the Duties And Scopes Of MDR Compliance? EU regulators may have quality management and risk management systems. Besides, these regulators can conduct the clinical evaluation, compile all technical documentation, and apply conformity assessment techniques. What to Know About MRD Checklist? Now that you’ve understood its scopes and duties, here’s presenting everything about the EU MDR checklist. These are the tasks that you require including in the action plan. They are: • Design concern • Product concern What to Learn About the Design Concerns? There are four basic thumbs’ rules: >> Firstly, it’s imperative to define the product classification on the basis of your intended motive or purpose. Remember that a few devices have already got an upper or lower position in the classification system. For this reason, it is important to consider paying attention to the devices attributed to a higher risk score (let’s say from the MDD 2nd Class to 3rd Class) >> After this, you have to determine the general design as well as safety requirements. >> You also need to have your risk management system and ready-to-activate specific control measures. >> As an effective practice, you can encourage using the harmonized standards earlier than intended. What to Learn About Product Concerns? Follow the below-offered bullets to learn more about product concerns: • Firstly, you need to list the product characteristics before checking against MDR to assess gaps • You need to consider device performance and product evidence • Next, you have to list the physical, biological, and chemical properties • After this, you need to identify SVHCs or Substances of Very High Concern • Now, you need to define the minimum level of the article you wish to investigate • After doing so, you need to gather the information required for the technical documentation • Always keep an eye on relevant legislation for the devices (RoHS, REACH, etc.) • Next, you have to set up the clinical evaluation process • Now, you need to ensure the availability of the technical documentation • Design the post-marketing vigilance procedure before establishing the corrective action • Designate for authorized representation in case the operations aren’t inside EU • EUDAMED is where you have to register the product • Collect information on the ability to cover liabilities financially • Appoint the MDR compliance-dedicated professional to act as the dispatcher and central point of the project Final Words So, these are the tasks that you need to perform. However, each product will have its own sets of tasks, which you need to perform accordingly (as, if, and when required).
Factors That Influence The Appeal Of Your Business Profile
If you're considering building a company profile for your company, keep in mind that a variety of things influence its appeal. Design, content quality and authenticity, format, linguistic tone, supporting visuals and graphs, charts, and so forth are all factors to consider. As a result, it's critical to undertake as much study and preparation as possible before publishing your profile. Design When it comes to creating corporate profiles for their businesses, many people opt for basic designs. You are not required to be one of them. You are allowed to choose any design that appeals to you as long as it appears to be suitable with the kind of the business you operate. If you're stuck, you can take some online polls or ask your friends for advice. Alternatively, seek the guidance of Bangalore-based corporate profile designers. They would provide you with a variety of compatible company profile designs that are appropriate for your industry. Client feedbacks Client testimonials are an excellent approach to impress your intended audience. There is a better chance of conveying authenticity to your business if you include input from important people that isn't excessively promotional. Also, read articles about how to start a business in Bangalore to expand your expertise. Order and coherence The logical order in which you provide information in your profile is also important. Maintain your order till the end of your profile if you're following one. You have the option of doing it chronologically or in reverse chronological order. Also, be certain that your information is coherent. Every phrase or sentence you provide in the profile should have a connection for the reader. Take a look at some sample profiles created by Bangalore-based Profile Designers. Contact details Remember to include your contact information in your business profile. It's best to include your phone number, email address, and website URL at the end of your profile. If you're creating a profile for a website, providing hyperlinked contact information will be more beneficial to your readers. Making your business popular among your customers take time, patience and effort. Getting a good profile that reflects your business is the right first step. This article on how to create a company in Bangalore would give you some useful ideas
MV Analysis/Theory: BTS and Nietzsche
"One must still have chaos within oneself, to give birth to a dancing star." - Thus Spoke Zarathustra: A Book for All and None, by Friedrich Nietzsche. (wiki on the book here) 1. For Whom You Shine The book begins with the quote: "You great star, what would your happiness be had you not those for whom you shine?" This clearly plays into the song lyrics, that they are nothing without the person they love. They offer their blood, sweat and tears to them, without this person to shine for, they are empty. 2. The Most Beautiful Moment in Life Nietzsche's writing often refers to the idea of eternal recurrence. This is the idea that all events in one's life will happen again and again, infinitely. "The embrace of all of life's horrors and pleasures alike shows a deference and acceptance of fate, or Amor Fati. The love and acceptance of one's path in life is a defining characteristic of the overman*. *Overman - Nietzsche thinks that it is important for every generation to overcome their humanity. To be better than it, to push forward and grow and defy the boundaries set by the mere fact that we're human. Someone who creates something new is an overman. Is Jin repeating his actions over and over again but changing it slightly each time? Are we witnessing the butterfly effect? (For example we see Jungkook on the bike again, the lilies from I Need U, etc) Will the most beautiful moment in life go on forever, and is it turning into a nightmare?
TỬ VI Tháng 4/2020 Âm Lịch - tháng Tân Tỵ, năm Canh Tý.
TỬ VI THÁNG TÂN TỴ NĂM 2020 CỦA 12 CON GIÁP- TUỔI DẦN Tháng này thế nào? Các bạn cùng xem nhé! Tháng 4/2020 Âm Lịch - tháng Tân Tỵ, năm Canh Tý. Địa Chi: Dần. Ngũ Hành: Mộc. Thiên Can tháng thuộc Kim. Địa Chi tháng thuộc Hỏa Thiên Can tuổi khắc Thiên Can tháng, Địa Chi tuổi sinh Địa Chi tháng. Tuổi Dần tháng này gặp nhiều khó khăn, rất đen đủi Công việc: Bạn đang gặp bế tắc, có nhiều cản trở trong công việc. Mặc dù vậy, bạn vẫn giữ được bình tĩnh và sự tỉnh táo trước những thử thách đó. Sự nghiệp: Sóng gió ập đến, nhiều sự việc như lớp lang chồng đống kéo đến. Mọi việc vẫn còn nhiều bất ổn nhưng bạn đã giữ vững được tâm lý của mình. Hành động không nề hà khó khăn. Tình cảm: Cẩn thận nếu không muốn tự mình làm tổn thương mình. Cho đi không đồng nhất với việc nhận lại. . Tiền bạc: giúp tha nhân là giúp chính mình, của tích lũy tháng này không có là bao. Những mối quan hệ khác: Thường thường bậc trung, nhưng quý nhân vẫn chưa xuất hiện, hãy tự tin vào năng lực và trực giác của chính mình. Với ba tuổi: Mậu Dần, Canh Dần và Bính Dần Xem thêm: Tử Vi tuổi Ngọ năm 2021 Tử Vi tháng Tân Tỵ tuổi Mậu Dần 1998 Tuổi Mậu Dần, nạp âm Thành Đầu Thổ. Tháng Tân Tỵ nạp âm Bạch lạp Kim Mậu Dần cho đi là nhiều, tạo và làm việc thiện nhiều hơn Thiên Can tuổi sinh Thiên Can tháng, Địa Chi tuổi sinh Địa Chi tháng, mệnh tuổi sinh mệnh tháng. Mậu Dần tháng ngày, tình cảm nhiều xao xuyến, nhiều rung động mới trong tâm tư tình cảm. Chuyện tiền bạc đang diễn ra không như mong muốn. Cẩn trọng dễ mất tiền oan. Tuy tâm trạng lạc quan nhưng lại gặp phải rất nhiều thử thách. Mệnh tuổi Thành Đầu Thổ như thế che chắn cho Bạch Lạp Kim, điều thiện bạn làm người khác sẽ hàm ơn sâu đậm. Tử vi tháng Tân Tỵ tuổi Bính Dần - 1986 Tuổi Bính Dần, nạp âm Lư Trung Hỏa Tháng Tân Tỵ hoa giáp Bạch lạp Kim Bính Dần giữ mình chờ thời Thiên Can tuổi khắc Thiên Can tháng, Địa Chi tuổi sinh Địa Chi tháng, mệnh tuổi khắc mệnh tháng Bạn đang dành thời gian lo nghĩ những chuyện không đâu vào đâu, có chuyện tầm phào nhưng trong lòng cảm thấy bất an. Như có tật giật mình. Bạn dẽ gặp phải chuyện thị phi, gặp khủng hoảng tài chính và rơi vào bế tắc. Đây không phải là tháng làm ăn lớn, ẩn long giữ mình là tốt nhất. Bạn càng lo nghĩ mọi việc càng rối như vò tơ. Bạn không tìm được lối thoát cho bản thân và rơi vào tuyệt vọng. Xem thêm: Xem Tử Vi Tử vi tháng Tân Tỵ tuổi Giáp Dần - 1974 Tuổi Giáp Dần, nạp âm Đại Khê Thủy Tháng Tân Tỵ nạp âm Bạch lạp Kim Giáp Dần xui xẻo ập đến Thiên Can tuổi khắc Thiên Can tháng, Địa Chi tuổi sinh Địa Chi tháng, mệnh tháng sinh mệnh tuổi. Bạn đang có cơ hội thuận lợi để trở mình bước ra khỏi mớ bòng bong. Tuy nhiên, hành động có phần dè chừng, đâu đó còn là cảm giác thiếu tự tin. Tin người khác chứ không tin vào mình. Mặc dù mệnh Tháng sinh mệnh tuổi, tuy nhiên, Bạch Lạp Kim sinh xuất cho dòng Đại khê Thủy không được bao nhiêu. Tương quan Kim – Thủy ở đây tỷ lệ như bỏ muối vào biển. Do đó, dù được tháng tương sinh nhưng thành tựu có được thuận lợi cũng chẳng thấm vào đâu. Kết: Tuổi Dần tháng này không nên mưu sự lớn, cuộc sống thường ngày cũng đang có những xáo trộn, nên sống chậm.
[June-2021]Braindump2go New PL-100 PDF and VCE Dumps Free Share(Q52-Q72)
QUESTION 52 Case Study 2 - Contoso, Ltd Background Overview Contoso, Ltd. produces industrial furnaces. The company is struggling to meet increased demand in production orders. The company has corporate offices and manufacturing plants in Germany. The company also has offices and manufacturing plants in other regions of the world. The company purchases a plant from another company. The plant has been in operation for over 25 years. Current environment Accounting system and purchasing Operations for the company are managed very informally. Only a small number of long-term employees are aware of all manufacturing processes. Manufacturing and planning The company has a cloud-based ERP/accounting system and uses the General Ledger, Accounts Receivable, and Accounts Payable modules. The current system does not have any modules that handle shop floor or manufacturing planning functionality. Employee information is maintained only within the accounting system. Access to the information is strictly controlled due to privacy regulations and company policies. All purchasing of raw materials is performed based on bills of material (BOMs) generated by the engineering department when engineering prints are created. The corporate office uses Dynamics 365 Finance. The operations manager reports that Dynamics 365 Finance will not be implemented for the manufacturing plants for at least five years. Sales The plant that Contoso, Ltd. acquires uses Microsoft Excel workbooks and Microsoft Word documents to track the sales pipeline, requests for quote responses, and work estimates. The documents are stored on shared network drives. Printed engineering drawings are sometimes accidently used across orders. This results in rework, cost over runs, and missed deliveries. The company uses Job Traveler documents to detail the operations that need to be performed and the materials needed for a given job number. Requirements Solution Requests for quotes are currently stored in a Sales Log workbook. The workbook includes the following information: - Customer request number - Customer name - Description - Estimated value of the sale - Status of the Request for Quote (RFQ) with the values of Won, Lost, No Bid, and Cancelled - Names of the sales manager, salesperson, and estimator - Name of the product line - Date the quote was sent to the customer - Approximate start and finish dates of the project - Date the order was received, if won - Job number, which is assigned if won The company has a formal process in place for managing estimates. Some sales quotes lack required supporting documentation including estimates for labor and materials even though a formal process is in place. The company wants to incorporate the formal process as part of an app. Salespeople often do not set status of RFQs in the Sales Log to Won when a sale is closed and the customer purchase order is received. An accurate sales pipeline and win/loss information cannot currently be reported because the close probability field in the Sales Log is being set to 100% when a sale is closed and 0% when a sale is lost. Setting up a folder system on the network drive by a customer had not improved the hand-off of the current version of the sales quote to manufacturing. General You plan to create a solution that uses Microsoft Teams and Power Platform. You must convert the Sales Log workbook to a Common Data Service database. Each department will have a separate Teams channel. Employees must only be able to access the channel for their department. All employees and management will have read access to a general company channel. The Teams site must include the following channels: Sales The Sales dashboard must reside in the Sales channel and must include information about active quotes, sales pipeline, and year-to-date sales KPIs for sales quotas by region. All Sales-related documents must be stored in folders in the files location for this channel. Document versioning will be enabled. You must store the 10 most recent versions of a document. Manufacturing A dashboard that shows a capacity Heat map by month as well as expected sales that are likely to close for the next month. A sortable listing of all in-process jobs from the Job Setup table, by customer, start date, and product. Printed paper drawings must no longer be used. The drawings must be stored in folders in the files location for the manufacturing channel. You must create the following apps: Time Tracking You must create a canvas app to track time for each employee on mobile devices. The app must include the following: a Sign-in screen a screen to list the week’s time entries for the employee a screen to edit current time entries for the employee The app must meet the following requirements: The app must store its data in the existing on-premises Microsoft SQL Server instance. Employees must only be able to access their own time tracking records from the app. Employees must record all time spent in the fabrication of each customer job. Employees must only be able to modify time records for the current and previous day. Employees must be able to scan their badges to check in and out of work. Each badge contains the employee name and a current picture. A QR code must be added to all employee badges. The code must include the employee’s number. Job Traveler documents must be printed as PDF documents and must include UPC E barcodes for the job number and task number. The barcodes will be used with the time tracking application. Sales The Sales app must meet the following requirements: Provide a central location for all sales pipeline and quote information that is easily accessible and maintains all of the versions of the estimate, quote, and engineering documents. Include a dashboard that shows all currently active quotes, their status in the sales cycle, the probability of closing, and estimated manufacturing and installation dates, by customer, product division, status, and salesperson. The Sales Log app must enforce process standards related to the completion of estimates and supporting materials needed during the sales lifecycle. Automatically perform the following actions immediately when a sale is won: - Generate a sequential job number. - Copy key sales information to the Job Setup entity used by manufacturing. If the sale is lost, the Status field must be set to Lost and the reason for the loss must be entered into a provided text field. The reason must be added to the end of the description field. Ensure that employees can easily update the Sales Log even if they are at a customer site. Manufacturing and planning The app must meet the following requirements: Provides features to plan and predict capacity resource requirements for current and upcoming orders in the pipeline. Replace paper timesheets and track check-in, check-out, breaks, and the time spent on each job task. Record time elapsed while performing work and for viewing of engineering drawings. The Job Setup entity must store its data in the existing on-premises SQL Server instance. Job Traveler documents must be generated as a PDF document and printed from the Job Setup entity. Issues Users report that the customer request number is difficult to interpret. They request that you change the number to a system generated sequential number. The operations manager reports that users often incorrectly sign in to the time tracking app. The operations manager asks that the time tracking app display the employee’s photo once they have scanned their badge. Users want to be able to see their weekly total time entered from all screens. Testers report that they can see time entries in the Time Tracker app, not just their own. Additionally, they can also edit any existing time entries. You need to modify the entity form to resolve the customer request number issue. What should you do? A.Use a calculated field B.Change the data type of the customer request number field to Lookup C.Change the data type of the customer request number field to Autonumber Answer: C QUESTION 53 Case Study 2 - Contoso, Ltd Background Overview Contoso, Ltd. produces industrial furnaces. The company is struggling to meet increased demand in production orders. The company has corporate offices and manufacturing plants in Germany. The company also has offices and manufacturing plants in other regions of the world. The company purchases a plant from another company. The plant has been in operation for over 25 years. Current environment Accounting system and purchasing Operations for the company are managed very informally. Only a small number of long-term employees are aware of all manufacturing processes. Manufacturing and planning The company has a cloud-based ERP/accounting system and uses the General Ledger, Accounts Receivable, and Accounts Payable modules. The current system does not have any modules that handle shop floor or manufacturing planning functionality. Employee information is maintained only within the accounting system. Access to the information is strictly controlled due to privacy regulations and company policies. All purchasing of raw materials is performed based on bills of material (BOMs) generated by the engineering department when engineering prints are created. The corporate office uses Dynamics 365 Finance. The operations manager reports that Dynamics 365 Finance will not be implemented for the manufacturing plants for at least five years. Sales The plant that Contoso, Ltd. acquires uses Microsoft Excel workbooks and Microsoft Word documents to track the sales pipeline, requests for quote responses, and work estimates. The documents are stored on shared network drives. Printed engineering drawings are sometimes accidently used across orders. This results in rework, cost over runs, and missed deliveries. The company uses Job Traveler documents to detail the operations that need to be performed and the materials needed for a given job number. Requirements Solution Requests for quotes are currently stored in a Sales Log workbook. The workbook includes the following information: - Customer request number - Customer name - Description - Estimated value of the sale - Status of the Request for Quote (RFQ) with the values of Won, Lost, No Bid, and Cancelled - Names of the sales manager, salesperson, and estimator - Name of the product line - Date the quote was sent to the customer - Approximate start and finish dates of the project - Date the order was received, if won - Job number, which is assigned if won The company has a formal process in place for managing estimates. Some sales quotes lack required supporting documentation including estimates for labor and materials even though a formal process is in place. The company wants to incorporate the formal process as part of an app. Salespeople often do not set status of RFQs in the Sales Log to Won when a sale is closed and the customer purchase order is received. An accurate sales pipeline and win/loss information cannot currently be reported because the close probability field in the Sales Log is being set to 100% when a sale is closed and 0% when a sale is lost. Setting up a folder system on the network drive by a customer had not improved the hand-off of the current version of the sales quote to manufacturing. General You plan to create a solution that uses Microsoft Teams and Power Platform. You must convert the Sales Log workbook to a Common Data Service database. Each department will have a separate Teams channel. Employees must only be able to access the channel for their department. All employees and management will have read access to a general company channel. The Teams site must include the following channels: Sales The Sales dashboard must reside in the Sales channel and must include information about active quotes, sales pipeline, and year-to-date sales KPIs for sales quotas by region. All Sales-related documents must be stored in folders in the files location for this channel. Document versioning will be enabled. You must store the 10 most recent versions of a document. Manufacturing A dashboard that shows a capacity Heat map by month as well as expected sales that are likely to close for the next month. A sortable listing of all in-process jobs from the Job Setup table, by customer, start date, and product. Printed paper drawings must no longer be used. The drawings must be stored in folders in the files location for the manufacturing channel. You must create the following apps: Time Tracking You must create a canvas app to track time for each employee on mobile devices. The app must include the following: a Sign-in screen a screen to list the week’s time entries for the employee a screen to edit current time entries for the employee The app must meet the following requirements: The app must store its data in the existing on-premises Microsoft SQL Server instance. Employees must only be able to access their own time tracking records from the app. Employees must record all time spent in the fabrication of each customer job. Employees must only be able to modify time records for the current and previous day. Employees must be able to scan their badges to check in and out of work. Each badge contains the employee name and a current picture. A QR code must be added to all employee badges. The code must include the employee’s number. Job Traveler documents must be printed as PDF documents and must include UPC E barcodes for the job number and task number. The barcodes will be used with the time tracking application. Sales The Sales app must meet the following requirements: Provide a central location for all sales pipeline and quote information that is easily accessible and maintains all of the versions of the estimate, quote, and engineering documents. Include a dashboard that shows all currently active quotes, their status in the sales cycle, the probability of closing, and estimated manufacturing and installation dates, by customer, product division, status, and salesperson. The Sales Log app must enforce process standards related to the completion of estimates and supporting materials needed during the sales lifecycle. Automatically perform the following actions immediately when a sale is won: - Generate a sequential job number. - Copy key sales information to the Job Setup entity used by manufacturing. If the sale is lost, the Status field must be set to Lost and the reason for the loss must be entered into a provided text field. The reason must be added to the end of the description field. Ensure that employees can easily update the Sales Log even if they are at a customer site. Manufacturing and planning The app must meet the following requirements: Provides features to plan and predict capacity resource requirements for current and upcoming orders in the pipeline. Replace paper timesheets and track check-in, check-out, breaks, and the time spent on each job task. Record time elapsed while performing work and for viewing of engineering drawings. The Job Setup entity must store its data in the existing on-premises SQL Server instance. Job Traveler documents must be generated as a PDF document and printed from the Job Setup entity. Issues Users report that the customer request number is difficult to interpret. They request that you change the number to a system generated sequential number. The operations manager reports that users often incorrectly sign in to the time tracking app. The operations manager asks that the time tracking app display the employee’s photo once they have scanned their badge. Users want to be able to see their weekly total time entered from all screens. Testers report that they can see time entries in the Time Tracker app, not just their own. Additionally, they can also edit any existing time entries. You need to connect to the data source for the Job Setup app. What should you do? A.Configure a scheduled synchronization with the Common Data Service database B.Configure SQL Server database permissions C.Create a stored procedure that retrieves time records for a specific employee D.Configure an on-premises data gateway Answer: D QUESTION 54 Case Study 2 - Contoso, Ltd Background Overview Contoso, Ltd. produces industrial furnaces. The company is struggling to meet increased demand in production orders. The company has corporate offices and manufacturing plants in Germany. The company also has offices and manufacturing plants in other regions of the world. The company purchases a plant from another company. The plant has been in operation for over 25 years. Current environment Accounting system and purchasing Operations for the company are managed very informally. Only a small number of long-term employees are aware of all manufacturing processes. Manufacturing and planning The company has a cloud-based ERP/accounting system and uses the General Ledger, Accounts Receivable, and Accounts Payable modules. The current system does not have any modules that handle shop floor or manufacturing planning functionality. Employee information is maintained only within the accounting system. Access to the information is strictly controlled due to privacy regulations and company policies. All purchasing of raw materials is performed based on bills of material (BOMs) generated by the engineering department when engineering prints are created. The corporate office uses Dynamics 365 Finance. The operations manager reports that Dynamics 365 Finance will not be implemented for the manufacturing plants for at least five years. Sales The plant that Contoso, Ltd. acquires uses Microsoft Excel workbooks and Microsoft Word documents to track the sales pipeline, requests for quote responses, and work estimates. The documents are stored on shared network drives. Printed engineering drawings are sometimes accidently used across orders. This results in rework, cost over runs, and missed deliveries. The company uses Job Traveler documents to detail the operations that need to be performed and the materials needed for a given job number. Requirements Solution Requests for quotes are currently stored in a Sales Log workbook. The workbook includes the following information: - Customer request number - Customer name - Description - Estimated value of the sale - Status of the Request for Quote (RFQ) with the values of Won, Lost, No Bid, and Cancelled - Names of the sales manager, salesperson, and estimator - Name of the product line - Date the quote was sent to the customer - Approximate start and finish dates of the project - Date the order was received, if won - Job number, which is assigned if won The company has a formal process in place for managing estimates. Some sales quotes lack required supporting documentation including estimates for labor and materials even though a formal process is in place. The company wants to incorporate the formal process as part of an app. Salespeople often do not set status of RFQs in the Sales Log to Won when a sale is closed and the customer purchase order is received. An accurate sales pipeline and win/loss information cannot currently be reported because the close probability field in the Sales Log is being set to 100% when a sale is closed and 0% when a sale is lost. Setting up a folder system on the network drive by a customer had not improved the hand-off of the current version of the sales quote to manufacturing. General You plan to create a solution that uses Microsoft Teams and Power Platform. You must convert the Sales Log workbook to a Common Data Service database. Each department will have a separate Teams channel. Employees must only be able to access the channel for their department. All employees and management will have read access to a general company channel. The Teams site must include the following channels: Sales The Sales dashboard must reside in the Sales channel and must include information about active quotes, sales pipeline, and year-to-date sales KPIs for sales quotas by region. All Sales-related documents must be stored in folders in the files location for this channel. Document versioning will be enabled. You must store the 10 most recent versions of a document. Manufacturing A dashboard that shows a capacity Heat map by month as well as expected sales that are likely to close for the next month. A sortable listing of all in-process jobs from the Job Setup table, by customer, start date, and product. Printed paper drawings must no longer be used. The drawings must be stored in folders in the files location for the manufacturing channel. You must create the following apps: Time Tracking You must create a canvas app to track time for each employee on mobile devices. The app must include the following: a Sign-in screen a screen to list the week’s time entries for the employee a screen to edit current time entries for the employee The app must meet the following requirements: The app must store its data in the existing on-premises Microsoft SQL Server instance. Employees must only be able to access their own time tracking records from the app. Employees must record all time spent in the fabrication of each customer job. Employees must only be able to modify time records for the current and previous day. Employees must be able to scan their badges to check in and out of work. Each badge contains the employee name and a current picture. A QR code must be added to all employee badges. The code must include the employee’s number. Job Traveler documents must be printed as PDF documents and must include UPC E barcodes for the job number and task number. The barcodes will be used with the time tracking application. Sales The Sales app must meet the following requirements: Provide a central location for all sales pipeline and quote information that is easily accessible and maintains all of the versions of the estimate, quote, and engineering documents. Include a dashboard that shows all currently active quotes, their status in the sales cycle, the probability of closing, and estimated manufacturing and installation dates, by customer, product division, status, and salesperson. The Sales Log app must enforce process standards related to the completion of estimates and supporting materials needed during the sales lifecycle. Automatically perform the following actions immediately when a sale is won: - Generate a sequential job number. - Copy key sales information to the Job Setup entity used by manufacturing. If the sale is lost, the Status field must be set to Lost and the reason for the loss must be entered into a provided text field. The reason must be added to the end of the description field. Ensure that employees can easily update the Sales Log even if they are at a customer site. Manufacturing and planning The app must meet the following requirements: Provides features to plan and predict capacity resource requirements for current and upcoming orders in the pipeline. Replace paper timesheets and track check-in, check-out, breaks, and the time spent on each job task. Record time elapsed while performing work and for viewing of engineering drawings. The Job Setup entity must store its data in the existing on-premises SQL Server instance. Job Traveler documents must be generated as a PDF document and printed from the Job Setup entity. Issues Users report that the customer request number is difficult to interpret. They request that you change the number to a system generated sequential number. The operations manager reports that users often incorrectly sign in to the time tracking app. The operations manager asks that the time tracking app display the employee’s photo once they have scanned their badge. Users want to be able to see their weekly total time entered from all screens. Testers report that they can see time entries in the Time Tracker app, not just their own. Additionally, they can also edit any existing time entries. Hotspot Question You need to implement features for the solution. Which Power Platform component should you use for each feature? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: Explanation: Box 1: Model-driven app The Sales app must meet the following requirements: Provide a central location for all sales pipeline and quote information that is easily accessible and maintains all of the versions of the estimate, quote, and engineering documents. Compared to canvas apps, model-driven apps in PowerApps are based on underlying data -- specifically, the data stored in Common Data Service (CDS). Box 2: Power BI Desktop You can create a KPI in Power BI Desktop. 1. Open your report editor in Power BI Desktop then select a report on which you are working. 2. On your right, you will see a Visualizations pane and a Fields pane. 3. From the Visualizations pane, select the KPI visual. 4. Etc. Box 3: Power Automate QUESTION 55 Case Study 2 - Contoso, Ltd Background Overview Contoso, Ltd. produces industrial furnaces. The company is struggling to meet increased demand in production orders. The company has corporate offices and manufacturing plants in Germany. The company also has offices and manufacturing plants in other regions of the world. The company purchases a plant from another company. The plant has been in operation for over 25 years. Current environment Accounting system and purchasing Operations for the company are managed very informally. Only a small number of long-term employees are aware of all manufacturing processes. Manufacturing and planning The company has a cloud-based ERP/accounting system and uses the General Ledger, Accounts Receivable, and Accounts Payable modules. The current system does not have any modules that handle shop floor or manufacturing planning functionality. Employee information is maintained only within the accounting system. Access to the information is strictly controlled due to privacy regulations and company policies. All purchasing of raw materials is performed based on bills of material (BOMs) generated by the engineering department when engineering prints are created. The corporate office uses Dynamics 365 Finance. The operations manager reports that Dynamics 365 Finance will not be implemented for the manufacturing plants for at least five years. Sales The plant that Contoso, Ltd. acquires uses Microsoft Excel workbooks and Microsoft Word documents to track the sales pipeline, requests for quote responses, and work estimates. The documents are stored on shared network drives. Printed engineering drawings are sometimes accidently used across orders. This results in rework, cost over runs, and missed deliveries. The company uses Job Traveler documents to detail the operations that need to be performed and the materials needed for a given job number. Requirements Solution Requests for quotes are currently stored in a Sales Log workbook. The workbook includes the following information: - Customer request number - Customer name - Description - Estimated value of the sale - Status of the Request for Quote (RFQ) with the values of Won, Lost, No Bid, and Cancelled - Names of the sales manager, salesperson, and estimator - Name of the product line - Date the quote was sent to the customer - Approximate start and finish dates of the project - Date the order was received, if won - Job number, which is assigned if won The company has a formal process in place for managing estimates. Some sales quotes lack required supporting documentation including estimates for labor and materials even though a formal process is in place. The company wants to incorporate the formal process as part of an app. Salespeople often do not set status of RFQs in the Sales Log to Won when a sale is closed and the customer purchase order is received. An accurate sales pipeline and win/loss information cannot currently be reported because the close probability field in the Sales Log is being set to 100% when a sale is closed and 0% when a sale is lost. Setting up a folder system on the network drive by a customer had not improved the hand-off of the current version of the sales quote to manufacturing. General You plan to create a solution that uses Microsoft Teams and Power Platform. You must convert the Sales Log workbook to a Common Data Service database. Each department will have a separate Teams channel. Employees must only be able to access the channel for their department. All employees and management will have read access to a general company channel. The Teams site must include the following channels: Sales The Sales dashboard must reside in the Sales channel and must include information about active quotes, sales pipeline, and year-to-date sales KPIs for sales quotas by region. All Sales-related documents must be stored in folders in the files location for this channel. Document versioning will be enabled. You must store the 10 most recent versions of a document. Manufacturing A dashboard that shows a capacity Heat map by month as well as expected sales that are likely to close for the next month. A sortable listing of all in-process jobs from the Job Setup table, by customer, start date, and product. Printed paper drawings must no longer be used. The drawings must be stored in folders in the files location for the manufacturing channel. You must create the following apps: Time Tracking You must create a canvas app to track time for each employee on mobile devices. The app must include the following: a Sign-in screen a screen to list the week’s time entries for the employee a screen to edit current time entries for the employee The app must meet the following requirements: The app must store its data in the existing on-premises Microsoft SQL Server instance. Employees must only be able to access their own time tracking records from the app. Employees must record all time spent in the fabrication of each customer job. Employees must only be able to modify time records for the current and previous day. Employees must be able to scan their badges to check in and out of work. Each badge contains the employee name and a current picture. A QR code must be added to all employee badges. The code must include the employee’s number. Job Traveler documents must be printed as PDF documents and must include UPC E barcodes for the job number and task number. The barcodes will be used with the time tracking application. Sales The Sales app must meet the following requirements: Provide a central location for all sales pipeline and quote information that is easily accessible and maintains all of the versions of the estimate, quote, and engineering documents. Include a dashboard that shows all currently active quotes, their status in the sales cycle, the probability of closing, and estimated manufacturing and installation dates, by customer, product division, status, and salesperson. The Sales Log app must enforce process standards related to the completion of estimates and supporting materials needed during the sales lifecycle. Automatically perform the following actions immediately when a sale is won: - Generate a sequential job number. - Copy key sales information to the Job Setup entity used by manufacturing. If the sale is lost, the Status field must be set to Lost and the reason for the loss must be entered into a provided text field. The reason must be added to the end of the description field. Ensure that employees can easily update the Sales Log even if they are at a customer site. Manufacturing and planning The app must meet the following requirements: Provides features to plan and predict capacity resource requirements for current and upcoming orders in the pipeline. Replace paper timesheets and track check-in, check-out, breaks, and the time spent on each job task. Record time elapsed while performing work and for viewing of engineering drawings. The Job Setup entity must store its data in the existing on-premises SQL Server instance. Job Traveler documents must be generated as a PDF document and printed from the Job Setup entity. Issues Users report that the customer request number is difficult to interpret. They request that you change the number to a system generated sequential number. The operations manager reports that users often incorrectly sign in to the time tracking app. The operations manager asks that the time tracking app display the employee’s photo once they have scanned their badge. Users want to be able to see their weekly total time entered from all screens. Testers report that they can see time entries in the Time Tracker app, not just their own. Additionally, they can also edit any existing time entries. Hotspot Question You need to configure the system to meet the sales requirements. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 56 You are an app designer for a hotel. The hotel wants to create an app to help the housekeeping staff schedule work. You need to create a new environment for the app. Where should you create the environment? A.Power Platform Admin center B.Power Apps Maker portal C.Dynamics 365 Admin center Answer: A QUESTION 57 A company delivers products to multiple communities. The company creates a canvas app connected to a Common Data Service database. The app tracks communities to see where the delivery volume is the highest. Drivers must enter delivery information on a form that uses an entity named Delivery. Depot staff must enter information on a pick-up form that uses an entity named Pick-up. Each form contains a community field that is based on a shared list across both forms. You need to create the community field. Which type of field should you create? A.local option set B.text C.global option set D.text area Answer: C QUESTION 58 A company has an on-premises system that stores product information. The company plans to replace the information with a Power Platform solution that uses the Common Data Service. The Power Platform solution needs to use data from the product information system. You need to transform and import the data from the product information system. Which two tools should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Dataflow B.Business process flow C.Power BI Desktop D.Data gateway Answer: AD QUESTION 59 In a Common Data Service database, you create a canvas app and a custom entity. The app also reads data from the Account entity in the Common Data Service database. Entity access permissions will be controlled by the Common Data Service User security role. You create a Common Data Service solution. You need to replicate the changes to a new Common Data Service database. Which two components should you include with the canvas app? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Custom entity B.Account entity C.Common Data Service User security role D.Sitemap Answer: BC QUESTION 60 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You build a canvas app for a manufacturing company. The company receives parts and materials from many vendors. You create a form to collect information from packing slips. Receivers must be able to take a picture of packing slips to receive materials instead of manually entering data in the app. You need to ensure that users can scan packing slip information into the form. Proposed solution: Use a Text Recognition model. Does the solution meet the goal? A.Yes B.No Answer: A QUESTION 61 You are developing a canvas app to monitor time. The app includes a Text Input control named TIC1 and a Timer control named TIM1. You need to set TIM1 to a default value. What should you do? A.In the OnChange property of TIC1, set the value of the Text property for TIC1 to a context variable that stores the duration value. Assign the value of the variable to the OnTimerStart property for TIM1. B.Assign the Text property of TIC1 to the Duration property of TIM1. C.Assign the Text property of TIC1 to the OnSelect property of a TIM1. D.Write code in the OnChange property of TIC1 that assigns the value of the Duration property of the Timer control to Text property of the TIC1. In the OnChange property of TIC1, assign the value to the Duration property for TIM1. Answer: D QUESTION 62 You create and publish a canvas app component library to perform complex calculations. You discover an error in one of the calculations. You correct the issue and publish the component library. A co-worker uses the original version of the component library in a canvas app. You need to ensure that the co-worker uses the updated version of the component library. What should you do? A.Export the updated component library and instruct the co-worker to import the updated version into the canvas app B.Inform the co-worker to edit the canvas app and manually add the updated version of the component library C.Instruct the co-worker to edit the canvas app and update the component library Answer: C QUESTION 63 You are creating a canvas app. You plan to use variables that are scoped to a screen to store values. You need to create and update the value of the variables. Which three functions can you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point. A.Collect B.Patch C.Navigate D.Set E.UpdateContext Answer: BCE QUESTION 64 You are creating a canvas app. You need to store and retrieve small amounts of data on a local device when the app is offline. Which set of functions should you use? A.SaveData, LoadData B.Set, Patch C.Patch, Collect D.Set, Collect Answer: A QUESTION 65 You are creating a canvas app. You need to display a limited list of choices to the end user. You must standardize the values and appearance of the list across all forms. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Add a drop-down field in the app B.Create a Global Option Set C.Add a new business rule D.Add a component to the component library Answer: AB QUESTION 66 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company has locations in multiple countries and regions across four continents. The company stores the total amount of each order in the local currency of the country/region where the customer is located. The company stores the applicable exchange rates in a custom US dollars (USD) exchange rate table. You need to create a visualization that displays the total amount of orders by country/region in USD. Proposed solution: Create a custom column that converts the order total to USD by using the relationship between order local currency and the USD exchange rate table in Power BI Desktop and display this column in a Power BI chart by country/region. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 67 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company has locations in multiple countries and regions across four continents. The company stores the total amount of each order in the local currency of the country/region where the customer is located. The company stores the applicable exchange rates in a custom US dollars (USD) exchange rate table. You need to create a visualization that displays the total amount of orders by country/region in USD. Proposed solution: Create a custom rollup field of type currency on the country/region table that aggregates all the total amounts for the orders from that country/region and display this rollup field in a Power BI chart. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 68 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company has locations in multiple countries and regions across four continents. The company stores the total amount of each order in the local currency of the country/region where the customer is located. The company stores the applicable exchange rates in a custom US dollars (USD) exchange rate table. You need to create a visualization that displays the total amount of orders by country/region in USD. Proposed solution: Create a custom calculated field of type currency on the order table that converts the order total to USD and displays the total amounts by region in a Power BI chart. Does the solution meet the goal? A.Yes B.No Answer: A QUESTION 69 You have a Power Platform solution that uses Common Data Service. You need to secure all fields that support field-level security. Which field can you secure? A.createdon B.accountid C.owninguser D.cr7b_accountid Answer: D QUESTION 70 You create a dashboard in Power BI. You share the dashboard with the sales team. Sales team members report that they can see information for the entire company. You need to ensure that the team is able to see only data for their team. Where must you configure this restriction? A.Dashboard B.Report C.Dataset D.Settings Answer: C QUESTION 71 You create a canvas app that connects to a Common Data Service database. Users report that they do not see any data in the app. You need to ensure that users can view data in the app. What should you do? A.Share the app with the users B.Add a Power Apps license to the users C.Assign a security role to the users D.Publish the app Answer: C QUESTION 72 You are creating an app for a company. You need to evaluate the default solution. Which two behaviors should you expect from the default solution? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point. A.You can change the prefix of the publisher of the default solution B.If you create a Power Automate flow in a solution, the flow uses the prefix defined in the publisher C.If you create an environment variable in a solution, the variable uses the prefix defined in the publisher D.You can change the version number of the default solution Answer: BD 2021 Latest Braindump2go PL-100 PDF and PL-100 VCE Dumps Free Share: https://drive.google.com/drive/folders/1CfAvf7OxWF4SYkHSmhCQ9pz7BFVq33_3?usp=sharing