What To Do When Your Toilet Overflows?
Understanding why the toilet is overflowing is one thing. Appropriately reacting to it is another. You can either take action to fix it on your own or get in touch with professional plumbers in Oakland when dealing with toilet problems. If there’s a barrel of a toilet in front of you, ready to overflow, given below are a few steps you need to take. 1. Be Proactive It is better to stop a toilet from overflowing than to deal with the mess afterward. The most common reason for an overflowing toilet is flushing it when it is already clogged. You don’t realize the clog and use the flush, causing water to flow over the rim. Check the flush after use. The water must completely drain as it is supposed to. The toiler paper you use also impacts the way your flush works. Generally, toilet paper is designed to flush easily, however, thicker quality can lead to a clog. 2. Take Action When you have a faulty water heater in the winter months, you cannot waste any time and need to immediately book water heater repair in Oakland. Similarly, when you notice that your toilet is clogged, act fast. Delaying the process can only worsen the situation, as you will have more water on the floor to clean. Quickly pick up a few towels to catch water around the toilet base and then proceed with the next steps. 3. Turn Off the Water This is probably the first step you should take. Don’t let water from the tank flow into the bowl. Remove the tank’s lid and press the flapper down to ensure that no more water can escape. At the moment, the water in the tank is clean, so you can use your hands or. The handle end of the plunger. Once the flapper is set down, water should stop leaving the bowl. You can also turn off the water supply to ensure that none of it goes into the tank. Most toilets have a shut-off valve with a small waterline behind the toilet. Turning this valve to the right will cease the water from flowing into the tank. 4. Get a Plunger Now that the water level has been taken care of and there’s no chance for it to increase further, get ready to tackle the clog. The best piece of equipment to do this is the plunger. A plunger creates extra pressure in the p-trap where the clog originates. Moreover, it blocks more water from coming back into the bowl. As a result, clogs are forced through the pipes. Place the plunger around the opening of the toilet trap. Using the right amount of pressure, push the plunger down a couple of times. Don’t maneuver the plunger too much. Frantic or careless motions can cause the water to spill, making it tougher and messier for you. A few pumps later, there should be no blockage, and the water in the bowl must flow freely. In case the problem persists, it is a sign that the problem is much more than a blockage. Get in touch with a professional for toilet or drain cleaning in Oakland to fix the problem completely and make your toilet functional again.