semutimut
100+ Views

Cara Aktivasi Microsoft Office 2019

Cara Aktivasi Microsoft Office 2019 - Cara Aktivasi Office 2019 Halo Sobat semutimut, jumpa kembali dengan mimin disini yang senantiasa membagikan pembaharuan terkini tentang teknologi. Tadinya, gimana berita kamu hari ini? mudah- mudahan senantiasa diberikan kesehatan ya. Semacam umumnya mimin ingin membagikan suatu aplikasi, permainan serta panduan trik terpopuler dikala ini. Nah pada peluang kali ini mimin hendak memberikan postingan tentang aktivasi office 2016 yang dimana banyak dicari oleh pengguna Komputer ataupun laptop. Nah penasaran semacam apa langsung saja ikuti pembahasan bagaikan berikut. Membuat sesuatu presentasi, dokumen ataupun berkas yang lain saat ini telah sangat terbantu dalam bermacam pekerjaan kantor. Kita bagaikan pengguna Komputer pastinya telah terahkan memakai aplikasi yang satu ini. Salah satu yang kerap digunakan merupakan microsoft word, excel, powerpoint, serta lain sebagainya ini ialah satu kesatuan yang terdapat dalam satu paket yang bernama Microsoft Office.

Seluruhnya pasti telah sempat Sobat pakai dalam pembuatan dokumen ataupun presentasi. Salah satu andalan aplikasi buat membuat dokumen merupakan Microsoft word. Maupun microsoft excel yang digunakan buat mencerna angka serta bermacam informasi statistik, keuangan serta yang lain, Nah buat menarangkan sesuatu data dapat nih Sobat memakai microsoft powerpoint bagaikan media presentasi serta lain sebagainya. Aplikasi microsoft office yang pengguna pakai pula bermacam- macam mulai dari office 2003, 2007, 2010, 2016 sampai 2019. Ada 2 kalangan ialah pengguna yang memakai tipe lama ataupun juga mau merasakan fitur terkini.

Microsoft Office ialah aplikasi yang sangat menolong didalam pekerjaan yang mewajibkan membuat file dokumen semacam perkantoran. Namun disayangkan, masih banyak pengguna yang belum mengenali gimana Cara membuka microsoft office 2016 yang terkunci ataupun Cara aktivasi microsoft office di laptop ataupun Komputer. Sementara itu buat mengaktifkan aplikasi microsoft office terkategori sangat gampang. Apabila Sobat melaksanakan instal microsoft office tanpa mengaktifkannya semacam memakai product key office 2016, hingga segala produk di ms office semacam word, excel serta yang lain tidak hendak bisa digunakan alias kandas aktivasi office 2016.

Kenapa Microsoft Office Wajib Di Aktivasi


Butuh dikenal apabila kita mau menikmati fitur dari Microsoft office secara penuh, yang wajib butuh dicoba ialah dengan aktivasi buat memperoleh lisensi office 365 free. Apabila kita sudah berakhir dalam menginstall Microsoft office 2016 jangan kurang ingat buat melaksanakan aktivasi ya. Sesungguhnya kita dapat saja tidak melaksanakan aktivasi.

Namun hendak lebih baik bila melaksanakan aktivasi supaya dikala kita lagi melaksanakan pekerjaan yang memakai aplikasi Microsoft office tidak hendak hadapi kendala. Seluruh tipe pada microsoft office mempunyai kasus yang sama. Tidak hanya itu Sobat dapat mengenali Cara memandang office 2016 telah aktif, Cara mengenali office 2010 telah diaktivasi dapat dilihat dari tittle diatas dengan tidak terdapat penjelasan“ Product Activation Failed”. Berarti microsoft office Sobat sudah teraktivasi serta kebalikannya pula.

Perihal yang hendak timbul bila Sobat tidak mengaktivasi microsoft office 2016 merupakan apabila kita membuka aplikasi Microsoft office 2016 hendak kerap timbul jendela aktivasi yang menyuruh kita buat memasukan produk key. Ini pula ialah Cara melenyapkan sign in to set up office. Ada pula perihal lain yang mewajibkan kita melaksanakan aktivasi, perihal lain ialah seringnya tampak product notice yang berikan data serta pula menyuruh kita buat lekas aktivasi office 2013 sebab produk kita tidak di aktivasi.

Tidak cuma itu, perihal yang sangat seram bila tidak aktivasi office 2016 bagas31 merupakan dikala kita telah membuat dokumen serta kita mau membuka kembali dokumen tersebut buat melaksanakan sedikit pergantian malah kerap kali malah tidak tersimpan.

Gimana Cara Aktivasi Office 2016? Buat mengenali Cara aktivasi microsoft office 2010 nyatanya tidak susah loh serta Sobat dapat jalani ini secara free. Ada sebagian Cara yang dapat Sobat jalani buat dapat melaksanakan aktivasi Microsoft Office 2016 secara offline serta pula free secara permanen.

Sobat dapat melaksanakan aktivasi tidak mempunyai produk key Office 2016, hingga Sobat bisa melaksanakan aktivasi memakai aplikasi aktivator ataupun juga yang lebih akrab diketahui dengan istilah KMS Activator. Saat sebelum melaksanakan proses Cara mengaktifkan microsoft word 2010 sampai 2019 langkah utama yang tidak boleh Sobat lewati ialah mematikan Antivirus buat sedangkan waktu.

Apabila Sobat memakai Windows Defender, silahkan dapat matikan fitur real- time protection pada aplikasi Windows Defender. Apabila Sobat memakai antivirus lain, silahkan dapat kunjungi postingan Cara mematikan antivirus.

Pastinya langkah ini dicoba supaya tidak ada hambatan buat melaksanakan Cara mengaktifkan microsoft word 2010 serta paket office yang lain. Sebab pada dasarnya Antivirus hendak menyangka aplikasi semacam aktivator ini bagaikan ancaman sehingga wajib dinonaktifkan buat sedangkan sepanjang proses aktivasi unduh office 2016 activator berlangsung.

Cara Aktivasi Microsoft Office 2019

Langsung saja buat mengenali Cara tersebut dapat Sobat ikuti serta simak langkah - langkah Cara aktivasi microsoft office 365 free pada yang dilansir dari laman tutorial komputer https://www.semutimut.com

Cara Aktivasi Office Memakai KMS Office

Cara awal ialah Cara aktivasi office 2016 tanpa aplikasi. Sedikit review dari Admin semutimut menimpa kms office 2016 kalau aplikasi ini ialah aplikasi free, aplikasi ini pula dapat OInstall. Serta Cara memakai juga lumayan gampang. Yang awal wajib Sobat jalani merupakan pastinya wajib memiliki aplikasi KMS Office 2019 yang telah terinstall pada penyimpanan harddisk di laptop. Apabila Sobat belum memiliki aplikasi ini, silahkan unduh kms office dulu.

Langkah - langkah

Apabila sudah mengunduh kms office 2016 gratis unduh, silahkan ekstrak saja KMS Office 2019 tadi. Sehabis itu, buka folder hasil dari ekstrak tersebut. Didalam folder tersebut tentu Sobat hendak menciptakan file dan folder OInstall. exe kemudian jalankan dengan catatan wajib di instal bagaikan Run as administrator. Hendak Terbuka tampilan utama aplikasi kms office tersebut, silahkan ceklis sebagian aplikasi office yang mau Sobat aktivasikan. Jangan kurang ingat buat memilah archietecture aplikasi office yang Sobat pakai. Bila telah silahkan klik install office. Tunggu sampai proses aktivasi berakhir.

Cara Aktivasi Memakai KMS Pico

Cara Berikutnya merupakan Cara aktivasi office 2019 dengan kmspico, nah pada Cara ini tercantum kedalam Cara aktivasi office 2019 tanpa product key. KMS Pico jadi salah satu aplikasi aktivator Office 2016 yang sangat banyak digunakan serta sangat terkenal dibandingkan aktivator lain. Sobat dapat menjajaki langkah - langkah aktivasi kmspico office 2016 cmd berikut buat aktivasi memakai kmspico office 2016. Sama semacam memakai KMS Office, saat sebelum melaksanakan aktivasi Office 2016 mengenakan aplikasi KMS Pico, yakinkan Sobat sudah mempunyai aktivator tersebut. Apabila Sobat belum mempunyai aplikasi KMS Pico, silahkan download sofware KMS Pico dibawah ini.

Langkah - langkah

Saat sebelum melaksanakan Cara mengaktifkan microsoft word 2007 sampai Cara mengaktifkan microsoft word 2019, matikan terlebih dulu antivirus yang lagi aktif. Bila telah mematikan antivirus tersebut, silahkan ekstrak ataupun dapat langsung buka file rar tersebut. Disini Sobat hendak masuk ketampilan full screen dari aplikasi kms pico. Berbeda dari aplikasi kms office, pada aplikasi kms pico ini Sobat tidak butuh memilah mana yang mau di aktivasi. Cuma lumayan menjajaki instruksi dengan Cara klik next. Bila perintah sudah berakhir, hingga proses aktivasi hendak dicoba serta tunggu sampai berakhir. Lumayan gampang bukan ?

Cara Aktivasi Office 2016 Dengan KMS Auto

Berikutnya merupakan Cara aktivasi office 2016 dengan kmsauto. Cara ini yang dapat Sobat jalani buat dapat mengaktifkan Microsoft Office 2016 supaya tidak memohon office 2016 product key secara terus menerus ialah dengan memakai KMS Auto Lite. Sama semacam cara - cara tadinya, Cara ketiga ini pula free dapat Sobat jalani. Tidak hanya itu, Office 2016 yang Sobat pakai pula hendak teraktivasi secara permanen. Buat dapat melakukancara aktivasi office 2016 dengan kmsauto net, silahkan Sobat simak langkah - langkah berikut.

Apabila hendak mengaktifkan office 2016 mengenakan KMS Auto Lite, hingga Sobat wajib mengecek tool tersebut apakah telah ada serta dapat digunakan pada pc Sobat. Apabila belum memilikinya, silahkan download KMS Auto Lite. Cara mengunduhnya dapat klik link dibawah ini.

Langkah - langkah

Setelah Sobat mengunduhnya, silahkan ekstrak terlebih dulu file KMS Auto Lite tersebut apabila masih dalam format rar. Sehabis itu, buka folder hasil dari ekstrak file KMS Auto Lite. Didalam folder tersebut Sobat hendak menciptakan 2 file ialah KMSAuto X64 serta KMSAuto. Sobat tidak hendak melaksanakan keduanya, tetapi sesuaikan dengan arsitektur pada Windows yang digunakan. Apabila laptop ataupun pc Sobat memakai Windows 64 - Bit, pakai yang KMSAuto X64, serta apabila 32 - Bit silahkan pakai file yang KMSAuto. Silahkan klik activate office serta tunggu sampai sukses teraktivasi. Cara cek office 2016 aktif permanen dapat dilihat dari penjelasan “ Activate Successful ”.

Dari seluruh aplikasi yang Admin semutimut bagikan, aplikasi inilah yang lebih lengkap sebab tidak hanya melaksanakan aktivasi office Sobat pula dapat melaksanakan aktivasi windows. Aplikasi KMS Auto ialah Aplikasi yang multifungsi.

Permasalahan yang Timbul Dikala Proses Aktivasi Office 2016 Meski Sobat telah menjajaki sebagian Cara diatas, tetapi terkadang hasil yang didapat tidak sama. Bisa saja seketika timbul permasalahan yang terjalin dikala Sobat melaksanakan aktivasi office memakai KMS Auto Lite.

Ada pula proses aktivasi tidak dapat dilanjutkan sebab ada error di tengah jalur. Berikut ini sebagian error yang kerap timbul dikala melaksanakan aktivasi Office 2016 memakai KMS Auto Lite serta Cara mengatasinya.

Permasalahan 1 Perihal ini terjalin sebab ada error dengan penjelasan “ CScript Error : Windows Script Host access is disabled on this machine ”. “ Contact your administrator for details ”.

Kasus tersebut disebabkan Sobat memasang anti virus Smadav dimana ada fitur buat mematikan Windows Script Host. Buat menanggulangi permasalahan ini, hingga kamu butuh menyalakan Windows Script Host pada Smadav.

Kesimpulan serta Penutup Sesungguhnya masih ada Cara lain buat melaksanakan aktivasi tidak hanya memakai langkah diatas. Tetapi bagi Admin semutimut Cara diatas ialah Cara terbaik dalam melaksanakan aktivasi office 2016.

Apakah aplikasi tersebut bisa mengaktivasikan tidak hanya office 2016 ?
Pasti saja, Sobat dapat memakai pada tipe office berbeda.
Apakah aku bisa mengaktivasikan windows memakai aplikasi tersebut ?
Tidak seluruh aplikasi yang admin bagikan bisa melaksanakan aktivasi windows.
Apakah aplikasi tersebut ringan digunakan ?
Pasti saja, tidak hanya itu sifatnya yang portable tidak memakan ruang harddisk

Demikian postingan tentang aktivasi office 2016, mudah - mudahan berguna buat Sobat semutimut sekaligus serta jangan kurang ingat buat terus dukung Admin dengan Cara share postingan ini ke sahabat ataupun account media sosial yang lain. Sekian dari Admin serta hingga jumpa.
Comment
Suggested
Recent
Cards you may also be interested in
2023 Latest Braindump2go MB-500 PDF Dumps(Q107-Q141)
QUESTION 107 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are developing a form for Dynamics 365 Finance. You need to add a button that allows users to run a report. Solution: Create a command button and link the button to the report by using the button's object property. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 108 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system's current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 109 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system's current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 110 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system's current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 111 You have a table in which multiple properties must be changed. Multiple table properties are locked down at the base table and must not be overwritten. You need to modify the table properties by extending the table. Which table property can you populate in a table extension by using the property sheet? A.Primary index B.Created by C.Configuration key D.Table group Answer: B QUESTION 112 You are a Dynamics 365 Finance developer. You create a key performance indicator (KPI) that will enable users to be able to see the total sales per region. You create a tile named SalesRegion and link the KPI to the tile. You need to ensure that users can view this tile on a form in the user interface. What should you do? A.Create an extension of the form that will contain the new tile and KPI. Add the tile to the extended form. B.Open the form that will contain the new tile. Add the tile to the form. C.Create a new workspace. Add the KPI to the workspace from the user interface. Answer: A QUESTION 113 You are training a new Dynamics 365 Finance developer. You need to recommend where asynchronous integrations should be used instead of synchronous integrations. For which scenario should you recommend asynchronous integration? A.A warehouse wants to track movement of all inventory from scanners to the system. B.A retailer wants to ensure gift card balances are communicated back to the system from point of sale (POS) terminals in near real-time. C.A company uses an on-premises inventory management system that needs to receive sales order data every hour throughout the day. D.A service company needs workers to be able to access just-in-time inventory data from the field by using a third-party Software as a Service (SaaS) application to ensure they have parts to complete a service. Answer: C QUESTION 114 Drag and Drop Question You need to map the Dynamics 365 Finance components into the standard models. Which component belongs to which model? To answer, drag the appropriate models to the correct components. Each model may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 115 Hotspot Question You are a Dynamics 365 Finance developer. You have the following entities. You must create the required fields and relationships in the staging tables. You need to develop a composite entity that uses the OrderHeader and OrderLine entities. Which object should you use for each action? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 116 Hotspot Question A company has a cloud-based Dynamics 365 Finance environment and uses an e-commerce website for retail operations. The website has business to business (B2B) capabilities. The company uses a middleware integration tool to process data. You must create a batch job to automate some operations. The batch job must be able to process several thousand transactions in each run. You need to configure the environment. Which tools should you use? To answer, drag the appropriate tools to the correct requirements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 117 You are a Dynamics 365 Finance developer. You make changes to an existing custom class. The code comparison tool shows version conflicts between your version and the latest checked-in version of the custom class. In Visual Studio, you open the Source Control Explorer. You locate the latest changeset for the class and you open the changeset in Team Explorer. You need to compare the latest code that is in source control with the code that you created. Which option should you use? A.Compare with Workspace Version B.Compare with Previous Version C.View History D.Compare with Latest Version Answer: A QUESTION 118 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are adding a new field to the SalesTable form. You must use an extension to add a status field onto the form. You need to create the extension in the Application Object Tree (AOT) and add the extension to the demoExtensions model. Solution: Navigate to the Visual Studio user interface forms extensions section for the SalesTable form and create an extension. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 119 You are a Dynamics 365 Finance developer. You need to create an extension class. Which action should you perform? A.Decorate the class with the ExtensionOf attribute. B.Add the class buffer as the first parameter. C.Mark the class as public. D.Mark the class as private. Answer: A QUESTION 120 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an enumeration named truckStatus that has the following statuses: Empty Loaded Completed You have the following code: You need to extend this enumeration and add the following statuses to the enumeration: Quarantine, InTransit. You must then modify code that validates the switch statement. Solution: Add a post handler to the method that checks the enumeration and logic for your new enumeration values using a range comparison for your new values. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 121 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an enumeration named truckStatus that has the following statuses: Empty Loaded Completed You have the following code: You need to extend this enumeration and add the following statuses to the enumeration: Quarantine, InTransit. You must then modify code that validates the switch statement. Solution: Add a post handler to the method that checks the enumeration and logic for your new enumeration values using the integer value of the enumeration. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 122 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an enumeration named truckStatus that has the following statuses: Empty Loaded Completed You have the following code: You need to extend this enumeration and add the following statuses to the enumeration: Quarantine, InTransit. You must then modify code that validates the switch statement. Solution: Add a post handler to the method that checks the enumeration and logic for your new enumeration values using the enumeration value. Does the solution meet the goal? A.Yes B.No Answer: A QUESTION 123 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are adding a new field to the SalesTable form. You must use an extension to add a status field onto the form. You need to create the extension in the Application Object Tree (AOT) and add the extension to the demoExtensions model. Solution: Add a new form object to the project and name the form SalesTable.Extension. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 124 You have a table in which multiple properties must be changed. Multiple table properties are locked down at the base table and must not be overwritten. You need to modify the table properties by extending the table. Which table property can you populate in a table extension by using the property sheet? A.Created by B.Primary index C.Cache lookup D.Clustered index Answer: A QUESTION 125 You are Dynamics 365 Finance developer. You need to initialize an embedded Microsoft Power BI report. Which code segment should you add to the form initialization method? A.getPBIReportByResourceName(resourceName) B.initializeReportControl(WorkspaceName, FormGroup) C.importAndStoreReport(powerBIConfiguration, resourceName, isUpate) D.deployOrUpdateReport(powerBIConfiguration, reportName, resourceName) Answer: B QUESTION 126 You have a cloud-based Dynamics 365 Finance production environment. You need to access the data to create Microsoft Power BI reports for the business. What should you use? A.Power BI embedded B.views C.aggregate dimensions D.data entities Answer: D QUESTION 127 You create a bring your own database (BYOD) entity that includes four tables. You need to configure change tracking for specific fields in the entity. Which option should you enable? A.custom query B.entire entity C.entity export D.primary table Answer: A QUESTION 128 Hotspot Question A company plans to migrate purchase orders from an older system into Dynamics 365 Finance. You need to generate field mapping between the source and the target data structures. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 129 Hotspot Question A company requires a change to one of the base Microsoft SQL Server Reporting Services (SSRS) reports. The report must include a new field that automatically filters the report based on the user who opens the report. You need to add the new field as specified. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: Explanation: You need to duplicate the existing report, there is no way yet to extend the existing report yet. For RDL reports you have no other option than to make the modification to the base query in the Controller class, because there is no Data provider for RDL reports. For RDP reports I would do the modification in the Data provider since you already directly copy the data to the tmp table from there. QUESTION 130 Drag and Drop Question A company uses Dynamics 365 Supply Chain Management. You need to monitor system performance. Which tool should you use? To answer, drag the appropriate tools to the correct requirements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 131 Drag and Drop Question A company implements Dynamics 365 finance and operations apps. You are developing code to consume OData service endpoints. You complete the application registration process and gather the details required to create a C# console application. You need to ensure that the console application interacts with Dynamics 365 Finance OData services. Which the actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 132 Hotspot Question A company is implementing Dynamics 365 Finance. Vendors receive a risk rating that is determined by their on-time delivery performance as well as their credit rating. You need to implement the following risk rating functionality: The risk rating must accompany the credit rating when the credit rating is used. The risk rating must be able to be used in other areas of the solution to determine processing outcomes. The risk rating must consist of the following values: 1 = Good 2 = Medium 3 = Risky The risk rating must be displayed in the Miscellaneous Details tab below the Credit Rating and Credit Limit fields in the Vendor form. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 133 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system’s current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: A Explanation: It extends the class _extendsion to SalesLineType. QUESTION 134 You are a Dynamics 365 Finance developer. You have the following Extended Data Types (EDTs): You plan to modify properties of the EDTs by using an extension. You need to determine which operations can be performed. Which operation is possible? A.Create an extension for AccountBase and decrease the field size. B.Create a derived EDT for AccountBase and increase the field size. C.Create an extension for AccountId and increase the field size. D.Create an extension for AccountBase and modify the Form Help property. Answer: D QUESTION 135 You are a Dynamics 365 Finance developer. You need to create an extension class. Which action should you perform? A.Mark the class as final. B.Add the class buffer as the first parameter. C.Add the suffix .extension to the file name. D.Add the suffix _myextension to the file name. Answer: A QUESTION 136 Drag and Drop Question You create a Visual Studio project named CustomerDetailUpdate. You must update data in a table named CustTable. You must be able to run the code from Visual Studio. In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 137 You create a new class. Class compilation must fail if a specific method in the source code is called. You need to mark the class with the appropriate attribute. Which attribute should you use? A.SysAppSecurityAttribute B.SysTestCategory C.SysObsoleteAttribute D.SysAttribute Answer: C QUESTION 138 You are Dynamics 365 Finance developer. You need to initialize an embedded Microsoft Power BI report. Which code segment should you add to the form initialization method? A.initializeReportControlInternal( powerBIConfiguration, reportParameters, reportControl, showError ) B.getPBIReportByResourceName( resourceName ) C.importAndStorageReport( powerBIConfiguration, resourceName, isUpdate ) D.initializeCustomReportControl( resourceName, formGroupControl, reportCustomParams Answer: D QUESTION 139 You are Dynamics 365 Finance developer. You need to initialize an embedded Microsoft Power BI report. Which code segment should you add to the form initialization method? A.initializeReportControlOnWorkspace(powerBIConfiguration, reportParameters, formGroupControl) B.importAndStorageReport(powerBIConfiguration, resourceName, isUpdate) C.initializeCustomReportControl(resourceName, formGroupControl, reportCustomParams) D.addReportControl (formGroupControl) Answer: C QUESTION 140 A company uses Dynamics 365 Finance. You have an entity named VendVendorV2Entity. You add a new column to the entity. You need to ensure that the new column is available in the entity for data transfer activity. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Select the Generate mapping button on the Mapping details form. B.Select the Validate button on the Entity list page. C.Select the Entity structure button on the Entity list page. D.Select the Modify target mapping button on the Entity list page. Answer: AB QUESTION 141 A company uses Dynamics 365 Finance. You ne lable when the sales representatives do not have internet access a cloud-hosted Tier-1 test environment that has Visual Studio installed. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Apply a deployment package B.Export the project as an .axpp file C.Create a deployment package D.Import the project into a cloud-hosted environment from an .axpp file and ensure that the Overwrite Elements option is selected Answer: BD 2023 Latest Braindump2go MB-500 PDF and MB-500 VCE Dumps Free Share: https://drive.google.com/drive/folders/1eBPhep3dQcxXcNjAUlm56nmtlPgT9iOR?usp=sharing
2023 Latest Braindump2go DP-300 PDF Dumps(Q109-Q140)
QUESTION 109 You are designing a security model for an Azure Synapse Analytics dedicated SQL pool that will support multiple companies. You need to ensure that users from each company can view only the data of their respective company. Which two objects should you include in the solution? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.a column encryption key B.asymmetric keys C.a function D.a custom role-based access control (RBAC) role E.a security policy Answer: CE QUESTION 110 You have an Azure subscription that contains an Azure Data Factory version 2 (V2) data factory named df1. DF1 contains a linked service. You have an Azure Key vault named vault1 that contains an encryption kay named key1. You need to encrypt df1 by using key1. What should you do first? A.Disable purge protection on vault1. B.Remove the linked service from df1. C.Create a self-hosted integration runtime. D.Disable soft delete on vault1. Answer: B QUESTION 111 A company plans to use Apache Spark analytics to analyze intrusion detection data. You need to recommend a solution to analyze network and system activity data for malicious activities and policy violations. The solution must minimize administrative efforts. What should you recommend? A.Azure Data Lake Storage B.Azure Databricks C.Azure HDInsight D.Azure Data Factory Answer: B QUESTION 112 You have an Azure data solution that contains an enterprise data warehouse in Azure Synapse Analytics named DW1. Several users execute adhoc queries to DW1 concurrently. You regularly perform automated data loads to DW1. You need to ensure that the automated data loads have enough memory available to complete quickly and successfully when the adhoc queries run. What should you do? A.Assign a smaller resource class to the automated data load queries. B.Create sampled statistics to every column in each table of DW1. C.Assign a larger resource class to the automated data load queries. D.Hash distribute the large fact tables in DW1 before performing the automated data loads. Answer: C QUESTION 113 You are monitoring an Azure Stream Analytics job. You discover that the Backlogged input Events metric is increasing slowly and is consistently non-zero. You need to ensure that the job can handle all the events. What should you do? A.Remove any named consumer groups from the connection and use $default. B.Change the compatibility level of the Stream Analytics job. C.Create an additional output stream for the existing input stream. D.Increase the number of streaming units (SUs). Answer: D QUESTION 114 You have an Azure Stream Analytics job. You need to ensure that the job has enough streaming units provisioned. You configure monitoring of the SU % Utilization metric. Which two additional metrics should you monitor? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Late Input Events B.Out of order Events C.Backlogged Input Events D.Watermark Delay E.Function Events Answer: CD QUESTION 115 You have an Azure Databricks resource. You need to log actions that relate to changes in compute for the Databricks resource. Which Databricks services should you log? A.clusters B.jobs C.DBFS D.SSH E.workspace Answer: A QUESTION 116 Your company uses Azure Stream Analytics to monitor devices. The company plans to double the number of devices that are monitored. You need to monitor a Stream Analytics job to ensure that there are enough processing resources to handle the additional load. Which metric should you monitor? A.Input Deserialization Errors B.Late Input Events C.Early Input Events D.Watermark delay Answer: D QUESTION 117 You manage an enterprise data warehouse in Azure Synapse Analytics. Users report slow performance when they run commonly used queries. Users do not report performance changes for infrequently used queries. You need to monitor resource utilization to determine the source of the performance issues. Which metric should you monitor? A.Local tempdb percentage B.DWU percentage C.Data Warehouse Units (DWU) used D.Cache hit percentage Answer: D QUESTION 118 You have an Azure Synapse Analytics dedicated SQL pool named Pool1 and a database named DB1. DB1 contains a fact table named Table. You need to identify the extent of the data skew in Table1. What should you do in Synapse Studio? A.Connect to Pool1 and query sys.dm_pdw_nodes_db_partition_stats. B.Connect to the built-in pool and run DBCC CHECKALLOC. C.Connect to Pool1 and run DBCC CHECKALLOC. D.Connect to the built-in pool and query sys.dm_pdw_nodes_db_partition_stats. Answer: A QUESTION 119 You have an Azure Synapse Analytics dedicated SQL pool. You run PDW_SHOWSPACEUSED('dbo.FactInternetSales'); and get the results shown in the following table. Which statement accurately describes the dbo.FactInternetSales table? A.The table contains less than 10,000 rows. B.All distributions contain data. C.The table uses round-robin distribution D.The table is skewed. Answer: D QUESTION 120 You are designing a dimension table in an Azure Synapse Analytics dedicated SQL pool. You need to create a surrogate key for the table. The solution must provide the fastest query performance. What should you use for the surrogate key? A.an IDENTITY column B.a GUID column C.a sequence object Answer: A QUESTION 121 You are designing a star schema for a dataset that contains records of online orders. Each record includes an order date, an order due date, and an order ship date. You need to ensure that the design provides the fastest query times of the records when querying for arbitrary date ranges and aggregating by fiscal calendar attributes. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Create a date dimension table that has a DateTime key. B.Create a date dimension table that has an integer key in the format of YYYYMMDD. C.Use built-in SQL functions to extract date attributes. D.Use integer columns for the date fields. E.Use DateTime columns for the date fields. Answer: BD QUESTION 122 You have an Azure Data Factory pipeline that is triggered hourly. The pipeline has had 100% success for the past seven days. The pipeline execution fails, and two retries that occur 15 minutes apart also fail. The third failure returns the following error. What is a possible cause of the error? A.From 06:00 to 07:00 on January 10, 2021, there was no data in wwi/BIKES/CARBON. B.The parameter used to generate year=2021/month=01/day=10/hour=06 was incorrect. C.From 06:00 to 07:00 on January 10, 2021, the file format of data in wwi/BIKES/CARBON was incorrect. D.The pipeline was triggered too early. Answer: B QUESTION 123 You need to trigger an Azure Data Factory pipeline when a file arrives in an Azure Data Lake Storage Gen2 container. Which resource provider should you enable? A.Microsoft.EventHub B.Microsoft.EventGrid C.Microsoft.Sql D.Microsoft.Automation Answer: B QUESTION 124 You have the following Azure Data Factory pipelines: - Ingest Data from System1 - Ingest Data from System2 - Populate Dimensions - Populate Facts Ingest Data from System1 and Ingest Data from System2 have no dependencies. Populate Dimensions must execute after Ingest Data from System1 and Ingest Data from System2. Populate Facts must execute after the Populate Dimensions pipeline. All the pipelines must execute every eight hours. What should you do to schedule the pipelines for execution? A.Add a schedule trigger to all four pipelines. B.Add an event trigger to all four pipelines. C.Create a parent pipeline that contains the four pipelines and use an event trigger. D.Create a parent pipeline that contains the four pipelines and use a schedule trigger. Answer: D QUESTION 125 You have an Azure Data Factory pipeline that performs an incremental load of source data to an Azure Data Lake Storage Gen2 account. Data to be loaded is identified by a column named LastUpdatedDate in the source table. You plan to execute the pipeline every four hours. You need to ensure that the pipeline execution meets the following requirements: - Automatically retries the execution when the pipeline run fails due to concurrency or throttling limits. - Supports backfilling existing data in the table. Which type of trigger should you use? A.tumbling window B.on-demand C.event D.schedule Answer: A QUESTION 126 You have an Azure Data Factory that contains 10 pipelines. You need to label each pipeline with its main purpose of either ingest, transform, or load. The labels must be available for grouping and filtering when using the monitoring experience in Data Factory. What should you add to each pipeline? A.an annotation B.a resource tag C.a run group ID D.a user property E.a correlation ID Answer: A QUESTION 127 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure Data Lake Storage account that contains a staging zone. You need to design a daily process to ingest incremental data from the staging zone, transform the data by executing an R script, and then insert the transformed data into a data warehouse in Azure Synapse Analytics. Solution: You use an Azure Data Factory schedule trigger to execute a pipeline that executes mapping data flow, and then inserts the data into the data warehouse. Does this meet the goal? A.Yes B.No Answer: B QUESTION 128 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure Data Lake Storage account that contains a staging zone. You need to design a daily process to ingest incremental data from the staging zone, transform the data by executing an R script, and then insert the transformed data into a data warehouse in Azure Synapse Analytics. Solution: You schedule an Azure Databricks job that executes an R notebook, and then inserts the data into the data warehouse. Does this meet the goal? A.Yes B.No Answer: B QUESTION 129 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure Data Lake Storage account that contains a staging zone. You need to design a daily process to ingest incremental data from the staging zone, transform the data by executing an R script, and then insert the transformed data into a data warehouse in Azure Synapse Analytics. Solution: You use an Azure Data Factory schedule trigger to execute a pipeline that executes an Azure Databricks notebook, and then inserts the data into the data warehouse. Does this meet the goal? A.Yes B.No Answer: A QUESTION 130 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure Data Lake Storage account that contains a staging zone. You need to design a daily process to ingest incremental data from the staging zone, transform the data by executing an R script, and then insert the transformed data into a data warehouse in Azure Synapse Analytics. Solution: You use an Azure Data Factory schedule trigger to execute a pipeline that copies the data to a staging table in the data warehouse, and then uses a stored procedure to execute the R script. Does this meet the goal? A.Yes B.No Answer: B QUESTION 131 You plan to perform batch processing in Azure Databricks once daily. Which type of Databricks cluster should you use? A.automated B.interactive C.High Concurrency Answer: A QUESTION 132 Hotspot Question You have an Azure Synapse Analytics dedicated SQL pool named Pool1 and an Azure Data Lake Storage Gen2 account named Account1. You plan to access the files in Account1 by using an external table. You need to create a data source in Pool1 that you can reference when you create the external table. How should you complete the Transact-SQL statement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 133 Hotspot Question You plan to develop a dataset named Purchases by using Azure Databricks. Purchases will contain the following columns: - ProductID - ItemPrice - LineTotal - Quantity - StoreID - Minute - Month - Hour - Year - Day You need to store the data to support hourly incremental load pipelines that will vary for each StoreID. The solution must minimize storage costs. How should you complete the code? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 134 Hotspot Question You are building a database in an Azure Synapse Analytics serverless SQL pool. You have data stored in Parquet files in an Azure Data Lake Storage Gen2 container. Records are structured as shown in the following sample. The records contain two ap plicants at most. You need to build a table that includes only the address fields. How should you complete the Transact-SQL statement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 135 Hotspot Question From a website analytics system, you receive data extracts about user interactions such as downloads, link clicks, form submissions, and video plays. The data contains the following columns: You need to design a star schema to support analytical queries of the data. The star schema will contain four tables including a date dimension. To which table should you add each column? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 136 Drag and Drop Question You plan to create a table in an Azure Synapse Analytics dedicated SQL pool. Data in the table will be retained for five years. Once a year, data that is older than five years will be deleted. You need to ensure that the data is distributed evenly across partitions. The solutions must minimize the amount of time required to delete old data. How should you complete the Transact-SQL statement? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 137 Drag and Drop Question You are creating a managed data warehouse solution on Microsoft Azure. You must use PolyBase to retrieve data from Azure Blob storage that resides in parquet format and load the data into a large table called FactSalesOrderDetails. You need to configure Azure Synapse Analytics to receive the data. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 138 Hotspot Question You configure version control for an Azure Data Factory instance as shown in the following exhibit. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point. Answer: QUESTION 139 Hotspot Question You are performing exploratory analysis of bus fare data in an Azure Data Lake Storage Gen2 account by using an Azure Synapse Analytics serverless SQL pool. You execute the Transact-SQL query shown in the following exhibit. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. Answer: QUESTION 140 Hotspot Question You have an Azure subscription that is linked to a hybrid Azure Active Directory (Azure AD) tenant. The subscription contains an Azure Synapse Analytics SQL pool named Pool1. You need to recommend an authentication solution for Pool1. The solution must support multi-factor authentication (MFA) and database-level authentication. Which authentication solution or solutions should you include in the recommendation? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: 2023 Latest Braindump2go DP-300 PDF and DP-300 VCE Dumps Free Share: https://drive.google.com/drive/folders/14Cw_HHhVKoEylZhFspXeGp6K_RZTOmBF?usp=sharing
2023 Latest Braindump2go 300-420 PDF Dumps(Q76-Q120)
QUESTION 76 How do endpoints inside an SD-Access network reach resources outside the fabric? A.a VRF fusion router is used to map resources in one VN to another VN B.Fabric borders use VRFs to map VNs to VRFs C.SD-Access transit links are used to transport encapsulated traffic from one fabric to another D.A fabric edge is used to de-encapsulate VXLAN traffic to normal IP traffic then transported over the outside network Answer: B Explanation: Fabric border routers handle the ingress & egress traffic for the SD-Access fabric, they are responsible for translating the policy, VRF & SGT information between the SD-Access fabric and the external networks. QUESTION 77 Which three pieces of information are carried on OSPF type 3 LSAs? (Choose three) A.metric B.authentication type C.link state D.IP subnet E.external route tag F.subnet mask Answer: ADF QUESTION 78 Which two statements about DMVPN with NHRP are true? (Choose two) A.NHRP shortens the configuration of the hub router. B.NHRP dynamically provides information about the spoke routers to the hub. C.NHRP disables multicast D.The hub router uses NHRP to initiate the GRE tunnel with spokes. E.The spoke routers act as the NHRP servers. Answer: AB QUESTION 79 In a simple MPLS L3VPN, which two tasks are performed by the PE router? (Choose two.) A.It establishes pseudo wires with other PEs. B.It exchanges VPNv4 and VPNv6 routes with CE Devices. C.It assigns labels to routes in individual VPNs. D.It forwards labeled packets to CE devices. E.It exchanges VPNv4 or VPNv6 route with other PE routers. Answer: CE QUESTION 80 Refer to the exhibit. Which action would make the router the active VRRP router? A.Recover interface Serial 1/0. B.Increase priority in the configuration to 100. C.Change the interface tracking priority to 100. D.Recover interface Serial 1/1. Answer: A QUESTION 81 Which design principle involves redundancy through hardware, software, and connectivity? A.Performance B.Security C.Scalability D.High availability Answer: D QUESTION 82 NAT-PT translates between what address types? A.RFC 1918 private addresses and public IPv4 addresses B.IPv4 and IPv6 addresses C.Network addresses and IPv6 ports D.Private IPv6 addresses and public IPv6 addresses Answer: B QUESTION 83 By default, if IS-IS is enabled on all routers, and this is an IPv6 network, what path is taken? A.Path 1 B.Path 2 C.Unequal-cost load balancing with Path 1 and Path 2 D.Equal-cost load balancing with Path 1 and Path 2 Answer: A QUESTION 84 How many host addresses are available with a Class B network with the default mask? A.63,998 B.64,QQQ C.65,534 D.65,536 Answer: C QUESTION 85 A packet sent to a multicast address reaches what destinations? A.The nearest destination in a set of hosts B.All destinations in a set of hosts C.All hosts D.Reserved global destinations Answer: B QUESTION 86 What does a hierarchical EIGRP design help with? (Choose two.) A.Redistribution B.Route summarization C.Faster convergence D.Load balancing Answer: BC QUESTION 87 During the integration of ISE and DNA Center, which of the following are used to establish trust through ISE? A.REST APIs B.pxGRID services C.Scalable groups D.SGACLs Answer: B QUESTION 88 In IS-IS networks, the backup designated router (BDR) forms adjacencies to what router or routers? A.It forms an adjacency only with the DR B.It forms adjacencies with all routers C.The BDR only becomes adjacent when the DR is down D.There is no BDR in IS-IS Answer: D QUESTION 89 You need to connect sites that are 8 kilometers apart by using fiber. Which media do you recommend? A.10GBASE-T B.10GBASE-ER C.10GBASE-LR D.10GBASE-SR Answer: C QUESTION 90 The customization of routing decisions is an example of which policy type? A.Centralized control policy B.Centralized data Policy C.Localized data policy D.Localized control policy Answer: A QUESTION 91 A client is moving to Model-Driven Telemetry and requires periodic updates. What must the network architect consider with this design? A.Updates that contain changes within the data are sent only when changes occur. B.Empty data subscriptions do not generate empty update notifications. C.Periodic updates include a full copy of the data that is subscribed to. D.The primary push update is sent immediately and cannot be delayed. Answer: C QUESTION 92 An architect is designing a multicast solution for a network that contains over 100 routers. The architect plans to create several multicast domains and balance the PIM-SM traffic within the network. Which technology should the architect include in the design? A.DVMRP B.IGMP C.MOSPF D.MSDP Answer: D QUESTION 93 An architect is designing a network that will utilize the spanning tree protocol to ensure a loop-free topology. The network will support an engineering environment where it is necessary for end users to connect their own network switches for testing purposes. Which feature should the architect include in the design to ensure the spanning tree topology is not affected by these rogue switches? A.BPDU Skew Detection B.BPDU guard C.loop guard D.root guard Answer: D QUESTION 94 An engineer is designing a Layer 3 campus network running EIGRP between the core, aggregation, and access layers. The access layer switches will be connected to the aggregation layer using Layer 3 copper connections. The engineer wants to improve convergence time for access layer switch failures. Which technique must the design include? A.enabling BFD for EIGRP on the access layer uplinks B.reducing the EIGRP Hello / Hold timer values C.EIGRP summarization from core to aggregation layer D.EIGRP summarization from access to aggregation layer Answer: A QUESTION 95 An engineer must design a solution to provide backup connectivity between two sites. The engineer plans to use an Internet connection but company policy requires the connection to be encrypted. Additionally, there are several applications that utilize multicast to deliver video streams between the sites. Which technology should the design include? A.GRE over IPsec B.IPsec direct encapsulation C.GETVPN D.DMVPN Answer: A QUESTION 96 An existing network solution is using BFD in echo mode. Several of the network devices are experiencing high CPU utilization which an engineer has determined is related to the BFD feature. Which solution should the engineer leverage to reduce the CPU load? A.Implement slow timers between peers with low CPU resources. B.Implement BED asynchronous mode between peers with low CPU resources. C.Enable BFD multi-hop on the devices with low CPU resources. D.Utilize carrier delay on all routers in the network. Answer: A QUESTION 97 Refer to the exhibit. An engineer is designing a BGP solution for a client that peers with ISP1 for full Internet connectivity and with ISP2 for direct exchange of routes for several third parties. Which action, when implemented on the edge routers, enables the client network to reach the Internet through ISP1? A.Run an eBGP session within different VRFs for each ISP. B.Advertise a default route for downstream routers within the client network. C.Apply the AS path prepend feature for ISP2. D.Apply route filtering such that the client advertises only routes originated from its own AS. Answer: B QUESTION 98 An architect is working on a design to connect a company's main site to several small to medium- sized remote branches. The solution must include redundant WAN links, but the customer has a limited budget and wants the ability to increase the link speed easily in the future. QoS will not on the branch routers so there is no need for consistent end-to-end QoS. Which solution does the architect propose? A.dual-homed WAN MPLS with single edge router B.dual-homed Internet with a single edge router running a site-to-site VPN topology C.dual-homed WAN MPLS and Internet links via dual edge routers D.dual-homed Internet with dual edge routers running a hub-and-spoke VPN topology Answer: D QUESTION 99 Refer to the exhibit. An architect must design an IP addressing scheme for a multisite network connected via a WAN transit. The campus site must accommodate 12,000 devices and the branch sites must accommodate 1,000 devices. Which address scheme optimizes network device resources, contains convergence events to the different blocks of the network, and ensures future growth of the network? A.Campus: 10.0.0.0/18 Branch1: 10.0.192.0/21 Branch2: 10.0.200.0/21 B.Campus: 10.0.0.0/16 Branch1: 10.255.0.0/20 Branch2: 10.255.16.0/20 C.Campus: 10.0.0.0/10 Branch1: 10.64.0.0/10 Branch2: 10.128.0.0/10 D.Campus: 10.0.0.0/20 Branch1: 10.0.64.0/21 Branch2: 10.0.128.0/21 Answer: A QUESTION 100 An engineer must design a solution to connect a customer to the Internet. The solution will include a Layer 3 circuit with a CIR of 50 Mbps from the service provider. The hand-off from the provider's switch to the customer's router is 1Gbps. Which solution should the engineer include to prevent potential issues with choppy voice traffic? A.Reduce the bandwidth of the connection to the router. B.Implement hierarchical QoS with a parent policing policy. C.Implement hierarchical QoS with a parent shaping policy D.Add a bandwidth statement to the router interface. Answer: C QUESTION 101 Refer to the exhibit. Customers report low video quality and delays when having point-to-point telepresence video calls between the two locations. An architect must optimize a design so that traffic follows the same path for egress and ingress traffic flows. Which technique optimizes the design? A.Configure route leaking on the router in area 2. B.Configure route leaking on he router in area 1. C.Configure the high metric on the router in area 4. D.Configure route filter on the router in area 4. Answer: A QUESTION 102 An engineer must design a scalable QoS architecture that allows the separation of the traffic into classes on predefined business requirements. The design must also utilize the differentiated services code points as the QoS priority descriptor value and support at least 10 levels of classification. Which QoS technology should the engineer include in the design? A.RSVP B.DiffSery C.Best Effort D.InterServ Answer: B QUESTION 103 Refer to the exhibit. Area 10 is a regular OSPF area and networks 10.1.1.0/24 and 172.16.1.0/24 are internal. Which design provides optimal routing between both networks when the link between routers C and E fails? A.Move the link between routers C and D to area 10. B.Create an OSPF virtual link between routers E and F. C.Create a tunnel between routers E and F in area 10. D.Make area 10 a not-so-stubby area. Answer: A QUESTION 104 An architect is creating a migration strategy for a large organization in which the choice made by the application between IPv6 and IPv4 is based on the DNS request. Which migration strategy does the architect choose? A.AFT for public web presence B.host-initiated tunnels C.dual stack D.site-to-site IPv6 over IPv4 tunnels Answer: C QUESTION 105 Refer to the exhibit. An engineer is designing an OSPF network for a client. Requirements dictate that the routers in Area 1 should receive all routes belonging to the network, including EIGRP, except the ones originated in the RIP domain. Which action should the engineer take? A.Make area 1 a NSSA. B.Make area 1 a stub. C.Make area 1 a standard OSPF area. D.Make the area 1 routers part of area 0. Answer: A QUESTION 106 An engineer must propose a solution for a campus network that includes the capability to create multiple Layer 3 virtual networks. Each network must have its own addressing structure and routing table for data forwarding. The solution must be scalable to support hundreds of virtual networks and allow simple configuration and management with minimal administrative overhead. Which solution does the engineer recommend? A.hop-by-hop EVN B.multihop MPLS core C.multihop IPsec tunneling D.hop-by-hop VRF-Lite Answer: D QUESTION 107 Refer to the exhibit. Which two solutions maximize the use of the links between the core and distribution layers? (Choose two.) A.use multiple equal-cost links B.use an IGP C.use HSRP D.use RPVSTP+ E.use multiple unequal-cost links Answer: AB QUESTION 108 An engineer is tasked with designing a dual BGP peering solution with a service provider. The design must meet these conditions: - The routers will not learn any prefix with a subnet mask greater than /24. - The routers will determine the routes to include in the routing table based on the length of the mask alone. - The routers will make this selection regardless of the service provider configuration. Which solution should the engineer include in the design? A.Use a route map and access list to block the desired networks, and apply the route map to BGP neighbors inbound. B.Use a route map and prefix list to block the desired networks, and apply the route map to BGP neighbors outbound. C.Use an IP prefix list to block the desired networks and apply the IP prefix list to BGP neighbors outbound. D.Use an IP prefix list to block the desired networks and apply the IP prefix list to BGP neighbors inbound. Answer: D QUESTION 109 An engineer is designing an EIGRP network for a small branch site where there is only one Layer 3 router. The engineer wants the router to advertise the local LAN network to remote EIGRP neighbors without sending any unnecessary multicast messages on the local LAN. Which action should the engineer take? A.Use a static default route for this site instead of EIGRP B.Advertise the local LAN using the network command and the passive-interface feature C.Redistribute the local LAN network using the redistribute connected command D.Advertise the local LAN subnet as a stub network Answer: B QUESTION 110 A network engineer is redesigning a company's QoS solution. The company is currently using IP Precedence, but the engineer plans to move to DiffServ. It is important that the new solution provide backward compatibility with the current solution. Which technology should the design include? A.expedited forwarding B.assured forwarding C.class selector code points D.default per hop behavior Answer: C QUESTION 111 A customer's current Layer 2 infrastructure is running Spanning Tree 802.1d, and all configuration changes are manually implemented on each switch. An architect must redesign the Layer 2 domain to achieve these goals: - reduce the impact of topology changes - reduce the time spent on network administration - reduce manual configuration errors Which two solutions should the architect include in the new design? (Choose two.) A.Implement Rapid PVST+ instead of STP. B.Implement MST instead of STP. C.Use VTP to propagate VLAN information and to prune unused VLANs. D.Configure broadcast and multicast storm control on all switches. E.Configure dynamic trunking protocol to propagate VLAN information. Answer: AC QUESTION 112 How is sub-second failure of a transport link detected in a Cisco SD-WAN network? A.Hellos are sent between the WAN Edge routers and the vSmart controller. B.BFD runs on the IPsec tunnels between WAN Edge routers. C.BGP is used between WAN Edge routers and the vSmart controller. D.Link state change messages are sent between vSmart controllers. Answer: B QUESTION 113 Refer to the exhibit. An architect must design a solution to connect the network behind R3 with the EIGRP network. Which mechanism should be included to avoid routing loops? A.down bit B.split horizon C.route tags D.summarization Answer: C QUESTION 114 Drag and Drop Question An engineer must design an addressing plan for a small business using a single /24 network. Each department must have its own subnet. Drag and drop the subnets from the left onto the departments requirements that they fulfill on the right. Not all options are used. Answer: QUESTION 115 Drag and Drop Question Drag and drop the characteristics from the left onto the Yang model they describe on the right. Answer: QUESTION 116 Drag and Drop Question Drag and drop the model driven telemetry characteristics from the left onto the mode they belong to on the right. Answer: QUESTION 117 A customer has several remote sites connected with their headquarters through microwave links. An engineer must propose a backup WAN solution based on these conditions: Which backup WAN link type the engineer recommend? A.LTE B.802.16 WiMAX C.Laser link D.802.15.1 Bluetooth Answer: A QUESTION 118 How is internet access provided to a WAN edge router that is connected to a MPLS transport link? A.OMP advertises a default route from a WAN Edge router that is connected to the MPLS and internet transport networks B.Internet access must be provided at the WAN Edge router through either a 4G/5G link or local Internet circuit C.An extranet must be provided in the MPLS transport network to allow private traffic to reach the public internet D.TLOC extensions are used to route traffic to a WAN Edge router that is connected to the Internet transport network Answer: D QUESTION 119 A network engineer must segregate three interconnected campus networks using IS-IS routing. A two-layer hierarchy must be used to support large routing domains and to avoid more specific routes from each campus network being advertised to other campus network routers automatically. Which two actions does the engineer take to accomplish this segregation? (Choose two.) A.Designate two IS-IS routers as BDR routers at the edge of each campus, and configure one BDR for all Level 1 routers and one BDR for all Level 2 routers. B.Designate two IS-IS routers from each campus to act as Level 1/Level 2 backbone routers at the edge of each campus network. C.Assign the same IS-IS NET value for each campus, and configure internal campus routers with Level 1/ Level 2 routing. D.Utilize different MTU values for each campus network segment. Level 2 backbone routers must utilize a larger MTU size of 9216. E.Assign a unique IS-IS NET value for each campus, and configure internal campus routers with Level 1 routing. Answer: BE QUESTION 120 Refer to the exhibit. All routers currently reside in OSPF area 0. The network manager recently used R1 and R2 as aggregation routers for remote branch locations and R3 and R4 for aggregation routers for remote office locations. The network has since been suffering from outages, which are causing frequent SPF runs. To enhance stability and introduce areas to the OSPF network with the minimal number of ABRs possible, which two solutions should the network manager recommend? (Choose two.) A.a new OSPF area for R1 and R2 connections, with R1 and R2 as ABRs B.a new OSPF area for R3 and R4 connections, with R5 and R6 as ABRs C.a new OSPF area for R3 and R4 connections, with R3 and R4 as ABRs D.a new OSPF area for R1, R2, R3, and R4 connections, with R1, R2, R3, and R4 as ABRs E.a new OSPF area for R1 and R2 connections, with R5 and R6 as ABRs Answer: BE 2023 Latest Braindump2go 300-420 PDF and 300-420 VCE Dumps Free Share: https://drive.google.com/drive/folders/1SXwfGxRyjBzcw1iBNd9T4FhKWBoH7WUo?usp=sharing
MS의 숨겨진 수? "닌텐도에도 콜 오브 듀티를 제공하겠다"
닌텐도 플레이어들도 Xbox와 같은 날 동일한 콘텐츠로 즐길 수 있다 닌텐도 스위치에서도 <콜 오브 듀티>를 플레이할 가능성이 생겼다? 지난해 12월 마이크로소프트 게이밍의 필 스펜서 CEO는 "액티비전 블리자드 인수가 종료되면 닌텐도의 콘솔에서 <콜 오브 듀티>를 플레이할 수 있는 10년 계약에 들어간다(entered)"고 밝힌 바 있다. 그리고 2개월 이후인 2월 21일 MS의 브래드 스미스 사장은 해당 내용의 계약을 체결(signed)했다고 밝혔다. 브래드 스미스 대표가 밝힌 내용은 다음과 같다. MS와 닌텐도는 Xbox와 플레이스테이션 게이머들이 <콜 오브 듀티>를 즐기는 것처럼, 닌텐도 게이머들도 <콜 오브 듀티>를 경험할 수 있도록 Xbox와 같은 날, 완전한 기능(full feature)과 동일한 콘텐츠로 닌텐도 플레이어들에게 제공할 수 있게 함께 협상하고 10년 법적 계약을 체결했다. 우리는 <콜 오브 듀티>에 대한 장기적이고 동등한 액세스를 다른 게임 플랫폼에 제공하는 것으로, 플레이어들에겐 더 많은 선택권을 주고, 게임 시장엔 더 많은 경쟁을 가져오게 하기 위해 노력하고 있다. 2월 21일 브래드 스미스 MS 사장이 자신의 트위터에 올린 공지 MS의 이런 계약 발표는 최근 제동이 걸리고 있는 액티비전 블리자드에 대한 인수 때문이라는 해석이다. 현재 해당 인수건에 대해서 16개국 규제 기관들은 '독점', '경쟁 저하'라는 측면에서 각각 허가와 불가의 판단을 내리고 있다.  구체적으로 FTC(미국), CMA(영국), 유럽연합 집행위원회(EU) 모두 인수 반대 의견을 내고 있는 상황이며, MS는 <콜 오브 듀티>를 Xbox에서 독점하지 않을 것이라고 밝혀왔다. 다시 말해 인수가 되면 "닌텐도에서도 즐길 수 있기 때문에 독점이 아니다"라는 강력한 의지의 표명인 셈이다. 따라서 이번에 닌텐도와 맺은 10년 계약이 MS의 액티비전 블리자드 인수에 어떤 영향을 줄 수 있을지 이목이 집중되고 있다. 한편, MS가 닌텐도와 맺은 계약은 액티비전 블리자드 인수 완료를 전제로 했다. 따라서 인수가 물거품이 된다면 자연스럽게 닌텐도와 맺은 계약도 효력은 발생하지 않을 것으로 보인다.
MS 한 번 더 10년 계약... 이번엔 유비투스와 손잡았다
지난달엔 닌텐도와 엔비디아, 이번 주엔 부스터로이드와 유비투스 마이크로소프트(이하 MS)가 액티비전 블리자드 인수를 위해 또 한 번 10년 계약을 발표했다. 3월 15일, MS는 인수가 완료되면 클라우드 게임 제공업체 유비투스에게 Xbox PC 게임과 액티비전 블리자드 타이틀을 스트리밍으로 제공한다는 10년 계약을 체결했다고 전했다. MS는 지난 달 21일 "인수 이후 닌텐도, 엔비디아에 <콜 오브 듀티>를 Xbox와 동일한 환경으로 제공한다"는 10년 계약을 맺었고, 3월 14일에는 "인수가 완료되면 부스터로이드에 <콜 오브 듀티>를 포함한 Xbox PC 게임을 제공하겠다"고 10년 계약을 체결했다. 오늘 공개한 유비투스 10년 계약은 부스터로이드 10년 계약과 마찬가지로 <콜 오브 듀티>에 국한되어 있지 않은 것이 특징이다.  다음 달에 있을 영국 CMA와 유럽연합 집행위원회의 인수 승인 여부 판단을 앞두고 MS는 액티비전 블리자드 게임을 독점할 뜻이 없음을 연일 강조하고 있다. 이와 관련해 외신들은 "MS가 경쟁사들에게 제안한 라이선스 계약이 EU의 반독점 문제에 큰 도움이 됐다"며 EU의 인수 승인 가능성이 높아졌다고 3월 초에 보도하기도 했다. MS 게이밍 CEO 필 스펜서는 유비투스와의 10년 계약 소식을 트위터를 통해 전하면서 "우리의 계약은 더 많은 플레이어에게 더 많은 선택권을 줄 것"이라고 표현했다.  유비투스 공식 트위터 또한 "MS와 10년 계약을 맺어 영광"이라며 "이번 콜라보레이션를 통해 고품질의 게임 IP로 우리 라이브러리를 확장하고 보강할 수 있게 됐다"고 전했다. 이어 "액세스 가능한 게임 스트리밍 솔루션을 통해 더 많은 국가의 플랫폼과 플레이어에게 양질의 게임을 제공한다는 목표를 유지할 것"이라 덧붙였다. MS는 인수가 완료되면 유비투스에 Xbox PC 게임을 제공하겠다는 10년 계약을 체결했다. 유비투스는 클라우드 게임 제공업체다. 사진은 유비투스 홈페이지
10 Must-Have Coding Technologies Every Developer Should Master
As developers, it’s crucial that we keep up to date with the most current technologies to be successful in the field. But it’s difficult to identify the ones you should master first and the ones you should save for later. Here are the 10 must-have coding technologies that every developer should know in 2021. 1. React - React is one of the most popular and versatile JavaScript libraries for creating user interfaces and front-end applications. Learning React will allow you to develop highly efficient, dynamic web applications and mobile applications. 2. HTML & CSS - While not technically a coding technology, having a strong understanding of HTML and CSS is a necessity for any developer. 3. Java - Java is one of the oldest coding technologies and is still highly relevant and useful. Java can be used to create applications, server programs, and web content. 4. C++ - C++ is an object-oriented programming language that makes it useful for applications like computer gaming. 5. Python - Python is an open-source, multi-paradigm coding language and one of the most popular coding technologies of the present day. 6. Selenium - Selenium is an open-source framework for automating web browsers. It is used for creating automated tests for web applications in various programming languages. join the selenium course online today. 7. MySQL - MySQL is a popular relational database system that is used to store and organize data. 8. Swift - Swift is an Apple-developed language for building iOS, macOS, tvOS, and watchOS apps. 9. AWS - Amazon Web Services (AWS) is the leading cloud service provider. Knowing AWS is key for the development of enterprise cloud-based solutions. 10. Kubernetes - Kubernetes is a powerful platform for orchestrating the management of multiple containers within a system. It’s perfect for any developer wanting to take advantage of the cloud. Conclusion If you’re new to coding and don’t know where to start, look into taking the best coding classes in Nagpur online. This will help you learn the essential technologies and prepare you to tackle the coding challenges ahead.
2023 Latest Braindump2go DP-500 PDF Dumps(Q36-Q66)
QUESTION 36 After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are using an Azure Synapse Analytics serverless SQL pool to query a collection of Apache Parquet files by using automatic schema inference. The files contain more than 40 million rows of UTF-8- encoded business names, survey names, and participant counts. The database is configured to use the default collation. The queries use open row set and infer the schema shown in the following table. You need to recommend changes to the queries to reduce I/O reads and tempdb usage. Solution: You recommend using openrowset with to explicitly specify the maximum length for businessName and surveyName. Does this meet the goal? A.Yes B.No Answer: B QUESTION 37 After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are using an Azure Synapse Analytics serverless SQL pool to query a collection of Apache Parquet files by using automatic schema inference. The files contain more than 40 million rows of UTF-8- encoded business names, survey names, and participant counts. The database is configured to use the default collation. The queries use open row set and infer the schema shown in the following table. You need to recommend changes to the queries to reduce I/O reads and tempdb usage. Solution: You recommend defining a data source and view for the Parquet files. You recommend updating the query to use the view. Does this meet the goal? A.Yes B.No Answer: A QUESTION 38 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have the Power Bl data model shown in the exhibit. (Click the Exhibit tab.) Users indicate that when they build reports from the data model, the reports take a long time to load. You need to recommend a solution to reduce the load times of the reports. Solution: You recommend moving all the measures to a calculation group. Does this meet the goal? A.Yes B.No Answer: B QUESTION 39 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have the Power BI data model shown in the exhibit (Click the Exhibit tab.) Users indicate that when they build reports from the data model, the reports take a long time to load. You need to recommend a solution to reduce the load times of the reports. Solution: You recommend denormalizing the data model. Does this meet the goal? A.Yes B.No Answer: B QUESTION 40 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have the Power Bl data model shown in the exhibit. (Click the Exhibit tab.) Users indicate that when they build reports from the data model, the reports take a long time to load. You need to recommend a solution to reduce the load times of the reports. Solution: You recommend normalizing the data model. Does this meet the goal? A.Yes B.No Answer: A QUESTION 41 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Power Bl dataset named Datasetl. In Datasetl, you currently have 50 measures that use the same time intelligence logic. You need to reduce the number of measures, while maintaining the current functionality. Solution: From Power Bl Desktop, you group the measures in a display folder. Does this meet the goal? A.Yes B.No Answer: A QUESTION 42 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Power Bl dataset named Dataset1. In Dataset1, you currently have 50 measures that use the same time intelligence logic. You need to reduce the number of measures, while maintaining the current functionality. Solution: From Tabular Editor, you create a calculation group. Does this meet the goal? A.Yes B.No Answer: B QUESTION 43 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Power Bl dataset named Datasetl. In Dataset1, you currently have 50 measures that use the same time intelligence logic. You need to reduce the number of measures, while maintaining the current functionality. Solution: From DAX Studio, you write a query that uses grouping sets. Does this meet the goal? A.Yes B.No Answer: B QUESTION 44 You open a Power Bl Desktop report that contains an imported data model and a single report page. You open Performance analyzer, start recording, and refresh the visuals on the page. The recording produces the results shown in the following exhibit What can you identify from the results? A.The Actual/Forecast Hours by Type visual takes a long time to render on the report page when the data is cross-filtered. B.The Actual/Forecast Billable Hrs YTD visual displays the most data. C.Unoptimized DAX queries cause the page to load slowly. D.When all the visuals refresh simultaneously, the visuals spend most of the time waiting on other processes to finish. Answer: D QUESTION 45 You have a Power Bl dataset that contains the following measure. You need to improve the performance of the measure without affecting the logic or the results. What should you do? A.Replace both calculate functions by using a variable that contains the calculate function. B.Remove the alternative result of blank( ) from the divide function. C.Create a variable and replace the values for [sales Amount]. D.Remove "calendar'[Flag] = "YTD" from the code. Answer: A QUESTION 46 You are implementing a reporting solution that has the following requirements: - Reports for external customers must support 500 concurrent requests. The data for these reports is approximately 7 GB and is stored in Azure Synapse Analytics. - Reports for the security team use data that must have local security rules applied at the database level to restrict access. The data being reviewed is 2 GB. Which storage mode provides the best response time for each group of users? A.DirectQuery for the external customers and import for the security team. B.DirectQuery for the external customers and DirectQuery for the security team. C.Import for the external customers and DirectQuery for the security team. D.Import for the external customers and import for the security team. Answer: A QUESTION 47 You are optimizing a Power Bl data model by using DAX Studio. You need to capture the query events generated by a Power Bl Desktop report. What should you use? A.the DMV list B.a Query Plan trace C.an All Queries trace D.a Server Timings trace Answer: D QUESTION 48 You discover a poorly performing measure in a Power Bl data model. You need to review the query plan to analyze the amount of time spent in the storage engine and the formula engine. What should you use? A.Tabular Editor B.Performance analyzer in Power Bl Desktop C.Vertipaq Analyzer D.DAX Studio Answer: B QUESTION 49 You are using DAX Studio to analyze a slow-running report query. You need to identify inefficient join operations in the query. What should you review? A.the query statistics B.the query plan C.the query history D.the server timings Answer: B QUESTION 50 You need to save Power Bl dataflows in an Azure Storage account. Which two prerequisites are required to support the configuration? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.The storage account must be protected by using an Azure Firewall. B.The connection must be created by a user that is assigned the Storage Blob Data Owner role. C.The storage account must have hierarchical namespace enabled. D.Dataflows must exist already for any directly connected Power Bl workspaces. E.The storage account must be created in a separate Azure region from the Power Bl tenant and workspaces. Answer: BC QUESTION 51 You have a Power Bl tenant that contains 10 workspaces. You need to create dataflows in three of the workspaces. The solution must ensure that data engineers can access the resulting data by using Azure Data Factory. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point A.Associate the Power Bl tenant to an Azure Data Lake Storage account. B.Add the managed identity for Data Factory as a member of the workspaces. C.Create and save the dataflows to an Azure Data Lake Storage account. D.Create and save the dataflows to the internal storage of Power BL Answer: AB QUESTION 52 You plan to modify a Power Bl dataset. You open the Impact analysis panel for the dataset and select Notify contacts. Which contacts will be notified when you use the Notify contacts feature? A.any users that accessed a report that uses the dataset within the last 30 days B.the workspace admins of any workspace that uses the dataset C.the Power Bl admins D.all the workspace members of any workspace that uses the dataset Answer: C QUESTION 53 You are using GitHub as a source control solution for an Azure Synapse Studio workspace. You need to modify the source control solution to use an Azure DevOps Git repository. What should you do first? A.Disconnect from the GitHub repository. B.Create a new pull request. C.Change the workspace to live mode. D.Change the active branch. Answer: A QUESTION 54 You have a Power Bl workspace named Workspacel that contains five dataflows. You need to configure Workspacel to store the dataflows in an Azure Data Lake Storage Gen2 account. What should you do first? A.Delete the dataflow queries. B.From the Power Bl Admin portal, enable tenant-level storage. C.Disable load for all dataflow queries. D.Change the Data source settings in the dataflow queries. Answer: D QUESTION 55 You are creating a Power 81 single-page report. Some users will navigate the report by using a keyboard, and some users will navigate the report by using a screen reader. You need to ensure that the users can consume content on a report page in a logical order. What should you configure on the report page? A.the bookmark order B.the X position C.the layer order D.the tab order Answer: B QUESTION 56 You plan to generate a line chart to visualize and compare the last six months of sales data for two departments. You need to increase the accessibility of the visual. What should you do? A.Replace long text with abbreviations and acronyms. B.Configure a unique marker for each series. C.Configure a distinct color for each series. D.Move important information to a tooltip. Answer: B QUESTION 57 You have a Power Bl dataset that has only the necessary fields visible for report development. You need to ensure that end users see only 25 specific fields that they can use to personalize visuals. What should you do? A.From Tabular Editor, create a new role. B.Hide all the fields in the dataset. C.Configure object-level security (OLS). D.From Tabular Editor, create a new perspective. Answer: B QUESTION 58 You have a Power Bl report that contains the table shown in the following exhibit. The table contains conditional formatting that shows which stores are above, near, or below the monthly quota for returns. You need to ensure that the table is accessible to consumers of reports who have color vision deficiency. What should you do? A.Add alt text to explain the information that each color conveys. B.Move the conditional formatting icons to a tooltip report. C.Change the icons to use a different shape for each color. D.Remove the icons and use red, yellow, and green background colors instead. Answer: D QUESTION 59 You are using an Azure Synapse Analytics serverless SQL pool to query network traffic logs in the Apache Parquet format. A sample of the data is shown in the following table. You need to create a Transact-SQL query that will return the source IP address. Which function should you use in the select statement to retrieve the source IP address? A.JS0N_VALUE B.FOR.JSON C.CONVERT D.FIRST VALUE Answer: A QUESTION 60 You have an Azure Synapse Analytics dataset that contains data about jet engine performance. You need to score the dataset to identify the likelihood of an engine failure. Which function should you use in the query? A.PIVOT B.GROUPING C.PREDICT D.CAST Answer: A QUESTION 61 You are optimizing a dataflow in a Power Bl Premium capacity. The dataflow performs multiple joins. You need to reduce the load time of the dataflow. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Reduce the memory assigned to the dataflows. B.Execute non-foldable operations before foldable operations. C.Execute foldable operations before non-foldable operations. D.Place the ingestion operations and transformation operations in a single dataflow. E.Place the ingestion operations and transformation operations in separate dataflows. Answer: CD QUESTION 62 Note: This question is part of a scries of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have the Power Bl data model shown in the exhibit. (Click the Exhibit tab.) Users indicate that when they build reports from the data model, the reports take a long time to load. You need to recommend a solution to reduce the load times of the reports. Solution: You recommend creating a perspective that contains the commonly used fields. Does this meet the goal? A.Yes B.No Answer: B QUESTION 63 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Power Bl dataset named Dataset1. In Dataset1, you currently have 50 measures that use the same time intelligence logic. You need to reduce the number of measures, while maintaining the current functionality. Solution: From Power Bl Desktop, you create a hierarchy. Does this meet the goal? A.Yes B.No Answer: B QUESTION 64 Drag and Drop Question You have a Power Bl dataset that contains the following measures: - Budget - Actuals - Forecast You create a report that contains 10 visuals. You need provide users with the ability to use a slicer to switch between the measures in two visuals only. You create a dedicated measure named cg Measure switch. How should you complete the DAX expression for the Actuals measure? To answer, drag the appropriate values to the targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 65 Drag and Drop Question You have a Power Bl dataset that contains two tables named Table1 and Table2. The dataset is used by one report. You need to prevent project managers from accessing the data in two columns in Table1 named Budget and Forecast. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 66 Hotspot Question You are configuring an aggregation table as shown in the following exhibit. The detail table is named FactSales and the aggregation table is named FactSales(Agg). You need to aggregate SalesAmount for each store. Which type of summarization should you use for SalesAmount and StoreKey? To answer, select the appropriate options in the answer area, NOTE: Each correct selection is worth one point. Answer: 2023 Latest Braindump2go DP-500 PDF and DP-500 VCE Dumps Free Share: https://drive.google.com/drive/folders/1lEn-woxJxJCM91UMtxCgz91iDitj9AZC?usp=sharing
(PLR) 20 High Profit Ways to Make Money Online
Introduction Of (PLR) 20 High Profit Welcome To My Review Blog And This Is (PLR) 20 High Profit Review. In today’s digital age, the internet has become a powerful tool for making money online. With the right skills and strategies, anyone can tap into the vast potential of online income streams. That’s why we’ve created this PLR bundle: “20 High Profit Ways to Make Money Online.” Inside, you’ll find 20 chapters that cover a wide range of money-making methods, from selling handmade items on Etsy to investing in cryptocurrency to creating an online course. Whether you’re looking to start a side hustle or build a full-time online business, this PLR bundle provides valuable insights and practical tips for success. So, let’s dive in and explore the power of making money online! Benefits Of (PLR) 20 High Profit 1.) Access to a comprehensive guide on 20 different ways to make money online, providing a variety of options to choose from. 2.) Practical tips and insights on each method, helping buyers to get started quickly and with confidence. 3.) The ability to learn from experts in each field, gaining knowledge and expertise that can be applied to their own online money-making efforts. 4.) The convenience of having all the information in one place, saving time and effort compared to researching each method separately. 5.) The potential to increase income and financial stability through online money-making methods, providing an opportunity to achieve financial freedom and independence. 6.) The flexibility to choose a method that fits their skills, interests, and lifestyle, allowing buyers to create a career that aligns with their passions and goals. 7.) The potential to build a scalable and sustainable online business, providing long-term financial benefits and opportunities for growth. 8.) The ability to work from anywhere and at any time, providing greater freedom and flexibility compared to traditional jobs. 9.) The potential to generate passive income streams through methods such as affiliate marketing and online courses. 10.) The opportunity to learn and develop new skills, enhancing their overall professional and personal growth. https://reviewwithmahmudhasan.com/plr-20-high-profit-ways-to-make-money-online/
Ofertasya- Reparación De Computadoras En Santo Domingo
Reparacion de computadoras en santodo mingo - Encuentra los mejores servicios de reparación de computadoras en santodo mingo en Ofertasya.net. Contactanos- admin@servidescuento.com LR Jack of all trades - Manitas Descripción Construcción Contamos con más de 30 años de experiencia en la construcción de obras civiles. Supervisión De task tipo de proyectos, con la calidad y la garantía que nuestros clientes necesitan. Planificación Planificámos, organizamos y administramos tu proyecto para lograr el objetivo con city hall leader ef Ciudad All Urban communities Todas Las Provincias,Azua,Barahona,Duarte,El Seibo,Espaillat,Hato Mayor,Hermanas Mirabal,La Altagracia,La Romana,La Vega,María Trinidad Sánchez,Monseñor Nouel,Monte P lata,Peravia,Puerto Plata,Samaná,San Cristóbal,San José de Ocoa,San Juan,San Pedro Macorís,Sánchez Ramírez,Santiago,Santiago Rodríguez,Santo Domingo,Valverde Mantenimiento Para Aire Condicionado Descripción Incluye: MANTENIMIENTO Proficient PARA AIRE CONDICIONADO Hacemos la mejor limpieza a task tipo de aires Acondicionados, asesoramos al cliente con respecto al cuido del mismo, llámanos y reserva tu cita con anticipo, si realizas Dos o más servicios al mismo tiempo obtienes descuento particular. reparacion de computador Recuerda la salud no tiene precio, cuídate a ti y a los tuyos, mantén tu ambiente limpio. Información Adicional: Servicio a domicilio Servicios Audio Y Video | Desabolladura y Pintura | Grua | Auto Detailing | Mecanico | Gomeras | Alineamiento y Balanceo | Car wash | Frenos y Aceite | Otros | Depilación | Manicurísta | Estilista | Spa y Masajes | Barbero / Peluquero | Otros | Desarrollo De Software | Desarollo de Aplicaciones Móviles | Mercadeo Digital | Diseño Gráfico | Traduccion | Desarrollo Web | Otros | Limpieza de Piscina | Limpieza General | Limpieza de Alfombra | Servio de Lavandería | Otros | Albañilería | Carpintería | Cerrajería | Electricidad | Fumigación | Jardinería | Pintura | Plomería | Tapicería | Techos | Constructoras | Piscina | Ebanista | Pisos | Ayudantes | Handyman | Herreria | Otros | Alarma & Camaras | Cine en casa | Reparacion De Celulares | Reparacion De Electrodomesticos | Reparación de Computadoras | Servicio IT | Otros | Bus | Mensajerías | Mudanzas y Acarreos | Taxi Privado | Recoleccion de Basura | Otros | Arte, música, baile | Clases de música | Clases privadas | Clases de deporte | Postgrados, Maestrías, MBA | Idiomas | Clases de informática | Clases de computación | Otros Cursos | ️ Website: - https://ofertasya.net/provider-search/Santo%20Domingo/Reparaci%C3%B3n%20de%20Computadoras Please visit: - https://ofertasya-net.blogspot.com/2023/03/desarrollo-de-software-en.html And find details more on this
How to Fix RR Email Login Errors
Using this account, you can frequently send, receive, store, organize, and manage the account from your computer. But a time may come when you encounter Roadrunner Email Login Problems while trying to login with your RR email account. Are you perplexed by the complexities of Roadrunner email? Fear not, as this popular emailing service is a breeze to use - just like any other email account. With millions of users worldwide, it offers a host of exciting features that allow you to send, receive, store, organize and manage your email account with ease. But sometimes, things can go awry, and you might find yourself struggling to log in or access your account. Don't despair, as we're here to help you troubleshoot any login errors and get your account up and running again in no time! Why is your Roadrunner email not working? There could be a myriad of reasons, ranging from incorrect login credentials and poor internet connectivity to browser incompatibility errors and virus/malware issues. Your account may also be blocked or there may be problems with the IMAP or POP server settings. And if the server is down, you may encounter a "404 Not Found" error or other related messages. To fix these issues: You need to follow a few simple steps: First and foremost, ensure that you enter the correct login credentials without any typos or spelling mistakes. Double-check your password and make sure that the caps lock key is turned off. If you've forgotten your password, don't panic! Simply click on the "forgot password" option and create a new one for your Roadrunner email account. This will help you regain access to your account and get you back on track. If the issue persists, try switching to another WiFi connection or check if your outgoing server settings are configured correctly. If not, you'll need to set up your account again using the correct settings. Recover Roadrunner Login Password If you have any problem associated with the roadrunner password, we recommend you reset the mail password. Visit the official website at webmail.spectrum.net. On the RR email login page bottom, you will find an option (forgot email password) which you could use to reset the password. Choose the “I don’t know the email password” option to continue. Now you need to verify your email address, Enter the email address which is linked to your account. After entering your email address, click on submit to verify your details. A reset link will be sent to your email, follow the link, and enter your new password to continue the procedure. Still struggling to fix the problem? Don't worry - you can alway s reach out to the Roadrunner Support team for further assistance. They're available 24/7 to help you troubleshoot any login errors and get your account back up and running. With their expert guidance and support, you'll be able to manage your email account with ease and enjoy all the exciting features of Roadrunner email. RR Email Login Problems can be caused by the inappropriate configuration of SMTP settings, incorrect password or username, server down, and many more. In order to efficiently deal with such an issue, simply read the blog post.
Jasa Kirim Ekspedisi ke Saparua (0816267079)
Jasa Kirim Ekspedisi ke Saparua merupakan perusahaan yang bergerak dibidang pengiriman barang dengan tujuan dari dan ke seluruh wilayah Indonesia. Logistik Express memiliki keunggulan pada tarif yang terjangkau serta pengiriman aman sampai alamat tujuan. Di era sekarang ini banyak dibutuhkan jasa pengiriman yang praktis dan dan efisien. Untuk itu Logistik Express hadir sebagai mitra pengiriman barang anda mulai dari paket kecil 30kg, 50kg, dan 100kg sampai hitungan tonase. Melayani pengiriman retail, LCL (Less Container Load), FCL (Full Container Load), dan sewa armada. MACAM MACAM ARMADA PENGIRIMAN 1. Via Udara : pengiriman barang cepat sampai 2. Via Laut : solusi pengiriman hemat 3. Via Darat : kirim barang cepat dan hemat Makin banyak makin murah ? Apanya, tuh ? Ya ongkos kirimnya, lah! Logistik Express Jasa Ekspedisi Ternate dan ke seluruh Indonesia menyediakan pengiriman barang dengan tarif yang murah. Tidak perlu khawatir sebanyak apapun barang kirimanmu, kirim pakai Logistik Express dijamin terjangkau. Mau kirim barang berat ? Atau barangnya ringan tapi makan tempat ? Logistik Express punya solusi, dong! Kantor cabang dan perwakilan yang tersebar di seluruh Indonesia akan semakin memudahkan untuk pengiriman barangmu. Pengiriman cukup di kota bahkan sampai pelosok pun Logistik Express akan siap sedia. Ingat Ongkir Murah, Ingat Logistik Express PEMESANAN LAYANAN CARGO KE SAPARUA LOGISTIK EXPRESS Hubungi Kami Untuk Konsultasi Dan Juga Layanan Kiriman Cargo Customer Service Yuni : 0816267079 Email : yuni.logistikexpress.id@gmail.com Ekspedisi Jakarta Saparua, Maluku Tengah Ekspedisi Semarang Saparua, Maluku Tengah Ekspedisi Surabaya Saparua, Maluku Tengah Ekspedisi Bandung Saparua, Maluku Tengah Ekspedisi Tangerang Saparua, Maluku Tengah
"디아블로 4 Xbox 게임패스로 나와요?"에 대한 블리자드의 답변은?
오픈 베타를 앞두고 로드 퍼거슨 총괄 프로듀서가 올린 답변 오는 6월 정식 출시될 <디아블로 4>는 정가 84,500원을 주고 플레이하게 될 것 같다. 액티비전 블리자드의 <디아블로> 시리즈 총괄 프로듀서 로드 퍼거슨은 "<디아블로 4>를 Xbox 게임패스로 출시할 계획은 없다"고 밝혔다. 로드 퍼거슨은 3월 14일 올린 트위터 게시글에서 "우리는 <디아블로 4>가 Xbox 게임패스로 나올지에 대한 질문을 받았고, 그럴 계획은 없다고 알려드린다"며 "베타 얼리 액세스를 통해 만나뵙겠다"고 전했다. Xbox와 PS4, PC 사이의 크로스플레이를 지원하느냐는 질문에는 "지원한다"고 대답했다. <디아블로 4>의 게임패스 입점 여부는 마이크로소프트(이하 MS) 액티비전 블리자드 인수와 밀접한 관련이 있는 내용이다. MS는 <콜 오브 듀티>로 대표되는 액티비전 블리자드의 게임을 Xbox와 게임패스에서 독점하지 않을 것이라고 규제 기관을 설득 중에 있다. 일각에서는 10년 만에 돌아온 <디아블로 4>의 매출 감소를 우려한 결정이라는 분석도 있다. 지난 2월 MS가 영국 CMA에 제출한 자료에서 "MS 내부 분석 결과, Xbox 게임패스에 입점한 게임은 입점 후 12개월 동안 매출 감소를 보였다"고 했기 때문이다.  한편, <디아블로 4> 오픈 베타 얼리 액세스는 이번 주 토요일인 3월 18일 오전 1시부터 시작된다. 20일까지 진행되는 오픈 베타 얼리 액세스는 예약 구매를 한 유저만 이용할 수 있고, 그 다음 주말인 3월 25일부터 27일 사이에 진행되는 오픈 베타는 예약 구매 여부와 관계없이 모두 참여할 수 있다. 로드 퍼거슨 총괄 프로듀서는 3월 14일 트위터를 통해 "<디아블로 4>를 Xbox 게임패스로 출시할 계획은 없다"고 밝혔다.