1+ Views

The Anti-Hail Net To Protect The Vegetable Garden And Orchard

The Anti Hail Net must be placed in the garden with great care in order to avoid it being blown away by gale-force winds. If we talk about the advantages of having an anti-hail net to protect crops and fruit trees.
Cards you may also be interested in
Terrarium Side Table - Easy DIY
From the looks of it you might think, TOO HARD, FORGET IT. But you'd be wrong because this is actually a really easy DIY project that can really enhance your indoors by bringing the outdoors in. Supplies Needed: -4 sheets of plexiglass that are 24 x 18 inches -2 sheets of plexiglass that are 24.5 x 24.5 inches or larger -weld-on #4 and applicator bottle with needle -1 sheet 24.5 x 24.5 inches OSB or plywood -(2) 24.5 inch 1x2 wood pieces -(2) 26 inch 1x2 wood pieces -one 1 inch dowel for legs -4 screws -plexiglass knife (if needed) -saw (if needed) -drill -spray paint -terrarium insides (gravel or river rock, moss, manufactured mulch, faux succulents) This is an easy project for those who know there way around the DIY world. If you are new to DIY, then this is going to be a bit more advanced than you might be used to or come to expect. Also, expect to spend a good $200 on this project, depending on what you already have on hand and what you need to buy. Step One: Assemble the base of your terrarium. You can see from the photo above how I (very simply) put mine together. Basically you're going to make a short table with a lip that is sized to fit your plexi box inside. Step Two: Assemble your terrarium box. You'll be using electrical tape and the weld-on #4 to fuse the corners together. These sheets can be cut down by you or the hardware staff. They also come in different pre-cut sizes. Step Three: Create the top piece by fusing two plexi sheets (one smaller than the other) together. Step Four: Fill any edges of your base with wood filler and then paint the base. Step Five: The funnest part of this project is the creation of the contents. Have fun with rocks, plants and
How To Spray Paint Fresh Flowers
Since I can't get blue roses for my wedding, I looked into dying them blue, which can be done, but with limited success and too much labor and time. Instead, I stumbled upon this informational tutorial about getting the job done but with floral spray paint. Here are five methods for spraying fresh flowers for your wedding or any other use. Technique 1: Misting Hold the can 15" - 18" away from the flower when spraying. Move the flowers, not the can. Let it dry before adding coats. Tip here is to layer the color. Technique 2: Air Brushing Hold the can 20" away from the flower when spraying. Move the flowers, not the can. Here, you're just highlighting. Do not apply full coverage. Technique 3: Toning Hold the can 15" - 18" away from the flower when spraying. Hit just the edges of the petals to tone the flower. Don't completely cover the blossom. Technique 4: Back Spray Hold the can 15" - 18" away from the flower when spraying. Flat and wide single petal flowers are best for this. Mist the flowers ONLY from the back to develop deeper intensity. Technique 5: Tipping Hold the can 15" - 18" away from the flower when spraying. This works best for roses and carnations. Cup the flowers in your hand so just the tips are bunched together and exposed. After spraying, you will notice that just the tips are marked with color. If you've ever tried to dye your flowers and have found quick solid success, I would love to hear from you. My wedding theme is Tiffany Blue and as the new year gets closer to my wedding day, I still haven't figured out the flowers. HELP!! <3 Thank you!
Grow Your Own Avocado Tree From Seed
Planting your own avocado tree is a lot easier than you think. You don't need a lot of materials, space, or time. This project is great for people of all ages and can grow from your outdoor garden or inside your home. Here's how to get started: Directions: 1. Take a ripe avocado and cut it into 2 halves. Remove the seed from the center, rinse off with fresh water, and make sure there is no fruit on it. Let the seed dry completely. 2. Push 3-4 toothpicks inside the seed from all sides towards the middle. Place in a full glass of water so the pointy end of the seed faces upward, while the round part is in the water by an inch. 3. Keep the glass in a semi warm climate controlled place (away from direct sunlight). Leave for 4-6 weeks and check regularly to see if additional water needs to be added. Note: The seed will sprout a stem and roots. Once you see the stem is 6 inches long, cut it down to 3 inches. The stem will continue to grow and you will start to notice some leaves. 4. Take out the seed from the glass and move it to a large pot 3 ft. wide and 3 ft. deep. Add some rich fertile soil and compost to the pot and plant the seed. Note: The root of the seed should be pushed inside the soil about 1-3 inches, while the top half of the seed should remain outside the pot. 5. Place the pot where it can get good sunlight, water, and air. The soil should remain moist, but not completely saturated. Note: It's helpful to use a pot with good drainage. Pinch the top leaves of the plant every time the stem length increases by 6 inches to help the growth of the plant. *It's beneficial to start planting in the Spring. Also, if you don't want to plant your avocado tree in the garden, make sure to take your plant outside on a daily basis for sunlight and fresh air. It will take about 7=15 years for the tree to yield fruit, so be patient!