Cards you may also be interested in
COVID-19 Impact on Automotive Sensor in Semiconductors and Electronics Industry | Data Bridge Market Research
COVID-19 Impact on Automotive Sensor in Semiconductors and Electronics Industry COVID-19 is a pandemic disease that has triggered a serious worldwide epidemic, beginning in China and almost every region. It has a huge effect on almost all including human life, global economy, automobile industry, manufacturing sector, consumer goods, defense and surveillance, among others as a result of lowering demand among usage rates. The unavailability of the vaccine to control or deter the spread of the disease is a big reason why lockdown was introduced for prevention and to reduce the spread of COVID-19. To monitor the transmission of the disease, lockdown is considered the best response found in many countries so far, but it also has an adverse economic impact. More than 2 billion citizens were under a kind of lockdown at the height of the pandemic, and 91% of the world’s populace, about 7.1 billion citizens, resides in countries with border restrictions about travel bans because of the epidemic. Currently, however, the factories are beginning to reopen in almost every country by taking some prevention such as 20%- 50% field workers, social distancing, drastic hygiene steps and others to help the economy. It strengthens the economy and tends to bring down the rate of contraction at any stage. COVID-19 highly impacted the transportation of public. During time of social distancing, travelers were asked to avoid travel unless it's completely necessary. Also the behavior of the individuals have certainly changed in the pandemic, people are now more concerned towards their health and spending for future use due to incurred losses which leads to decrease in the sale of automotive vehicles. Sensors are used to minimize fuel consumption and reduce onboard weight of vehicles. Thus increasing/decreasing demand for automotive vehicles directly impacts the demand for automotive sensors. COVID-19 has had a severe impact on the global automotive sensors market. Due to lockout initiatives, the poor demand for electronic, specialized products had a major effect on the market for automotive sensors. It is also expected that the ongoing decrease in demand and exports for motor vehicles will adversely affect the market for automotive sensors. IMPACT ON DEMAND AND SUPPLY CHAIN The pandemic brought a huge drop in sales for the automotive sensor market as the lockdown prevailed in most of the regions. The lockdown led manufacturers and consumers to completely stop the processes for few months. The demand for automotive sensor market faced drastic downfall due to shut down of various automobile, airlines, transport and electronic industry. However the things are getting normal day by day, government is taking initiatives to unlock business step by step. Post COVID-19 automotive sensor market will see an increased demand. The pandemic has also a huge impact on the supply chain of automotive sensor market. The supply chain was adversely affected as the lockdown prevailed in many regions globally, government has limited the workers. Companies are making their operation work according to the government regulations by making limited workers work in different shifts. However now there is an improvement in the supply chain as most of the facilities and travel restrictions have opened and working in most optimum capacity. Chinese components shortages, large-scale production interruptions throughout Europe, and the closing of assembly plants in the United States are upsetting the automotive sensor supply chain sector. Read more…
Thăng Long nơi mua bàn thu ngân chất lượng giá rẻ
Giá kệ Thăng Long đơn vị cung cấp bàn thu ngân siêu thị, bàn bán hàng siêu thị uy tín, chất lượng hàng đầu Việt Nam. Là đơn vị tiên phong trên thị trường giá kệ, thiết bị siêu thị, các mẫu bàn thu ngân siêu thị do chúng tôi cung ứng luôn có mẫu mã đẹp, đảm bảo độ bền, hiệu quả sử dụng với giá thành cạnh tranh trên thị trường. Cam kết những giá trị tốt nhất khi quý khách hàng sử dụng sản phẩm. Hiện nay Thăng Long đang cung cấp ra thị trường các mẫu bàn thu ngân siêu thị có chiều dài cơ sở từ 1.2m, 1.5m, 1.8m. Ngoài ra chúng tôi còn nhận sản xuất bàn theo yêu cầu của quý khách hàng đảm bảo phù hợp với mục đích sử dụng và không gian siêu thị, cửa hàng. Bàn có thiết kế linh hoạt, bàn chính được bố trí làm khu vực thanh toán cho khách hàng. Còn bàn phụ dùng để máy tính và két đựng tiền lưu động và thuận tiện cho nhân viên làm thu ngân khi thay cả trực. Toàn bộ quầy thu ngân đều được làm từ sắt sơn tĩnh điện 2 lớp, mặt inox 304 sáng bóng không lo bị han gỉ, mối mọt. Xung quanh viền bàn được ốp nhôm đề phòng va đập không bị bóp méo hay vỡ. Kiểu dáng hiện đại, tích hợp nhiều tính năng hỗ trợ cho việc thanh toán, bàn thu ngân Thăng Long giúp tạo sự chuyên nghiệp hoàn hảo cho hệ thống siêu thị, các cửa hàng tạp hóa hay các trung tâm thương mại. Qúy khách hàng có nhu cầu tư vấn và lắp đặt bàn thu ngân, quầy thu ngân siêu thị vui lòng liên hệ ngay với chúng tôi để được tư vấn. Ngoài các mẫu bàn thu ngân, Thăng Long còn cung cấp nhiều thiết bị hỗ trợ trưng bày hàng hóa cho siêu thị, cửa hàng như kệ siêu thị, kệ sắt để hàng,… Chúng tôi cam kết mang lại sự hài lòng hơn cả mong đợi. Thông tin liên hệ mua hàng: CÔNG TY CP ĐẦU TƯ VÀ TRANG THIẾT BỊ THĂNG LONG Hotline/zalo tư vấn bán hàng: 0919.467.868 - 0964.196.611 Website: Sieuthigiake.com Khu vực Miền Bắc: Số 1 ngõ 58 Trần Bình, Mai Dịch, Cầu Giấy, Hà Nội Khu vực Miền Trung: 58 Bế Văn Đàn, Thanh Khê, Đà Nẵng Khu vực Miền Nam: Số 121 Đường bà điểm 4, ấp Tây Lân Hóc Môn HCM ( cách mặt đường Phan Văn Hớn 100m bên tay phải).
Top 3 mẫu giá kệ siêu thị đẹp phổ biến hiện nay
Giá kệ siêu thị hiện nay có rất nhiều mẫu mã, kiểu dáng và kích thước đa dạng. Bạn đang có nhu cầu mua giá kệ để trưng bày hàng hóa cho siêu thị, cửa hàng của mình nhưng chưa biết nên chọn mua mẫu kệ nào đảm bảo chất lượng, hiệu quả sử dụng lâu bền. Dưới đây là 5 mẫu giá kệ siêu thị đang được nhiều chủ đầu tư lựa chọn. Mỗi mẫu kệ lại có những ưu điểm và tính năng vượt trội hơn hẳn. Mẫu kệ siêu thị tôn liền Một trong những mẫu kệ để hàng trong siêu thị được nhiều đơn vị kinh doanh lựa chọn đó chính là mẫu kệ tôn liền. Mẫu kệ này được thiết kế rất độc đáo, mâm kệ chắc chắn từ tấm tôn liền nguyên khối đảm bảo khả năng chịu tải trọng cao. Sử dụng mẫu kệ này sẽ giúp cho các siêu thị tiết kiệm được không gian trưng bày sản phẩm. Đồng thời tăng thêm sức hút cho không gian cửa hàng, siêu thị của bạn. Chi tiết sản phẩm xem tại: https://sieuthigiake.com/tin-gia-ke-sieu-thi/ke-sieu-thi-ton-lien.html Mẫu kệ siêu thị tôn lưới Kệ siêu thị lưng tôn lưới là mẫu kệ được sử dụng rộng rãi trong các siêu thị, cửa hàng. Phần lưng của kệ được làm từ tấm lưới tạo nên sự thông thoáng và tính thẩm mỹ khi trưng bày hàng hóa. Kệ lưới siêu thị được sử dụng để tối đa diện tích trưng bày hàng hóa. Giúp các chủ đầu tư có thể quản lý hàng hóa trong siêu thị một cách dễ dàng, khoa học hơn. Hàng hóa trưng bày trên kệ cũng được gọn gàng, chuyên nghiệp hơn giúp cho người mua hàng lựa chọn và quan sát hàng hóa được thuận tiện hơn. Chi tiết sản phẩm xem tại: https://sieuthigiake.com/tin-gia-ke-sieu-thi/ke-sieu-thi-lung-luoi.html Mẫu kệ siêu thị đột lỗ Mẫu kệ siêu thị đột lỗ là mẫu giá kệ trưng bày hàng hóa đang rất được ưa chuộng, bởi kiểu dáng đơn giản nhưng không kém phần sang trọng. Phần lưng kệ là những tấm tôn đục lỗ tinh xảo, đẹp mắt. Thiết kế này mang tới sự chắc chắn và tính thẩm mỹ cao cho mẫu kệ. Vì vậy, khi trưng bày bất kỳ sản phẩm nào trên mặt kệ cũng an toàn, chắc chắn hơn. Mẫu kệ này rất thích hợp để trưng bày các mặt hàng có trọng tải nặng như gạo, đồ da dụng, … Chi tiết sản phẩm xem tại: https://sieuthigiake.com/tin-gia-ke-sieu-thi/ke-sieu-thi-ton-lo.html Trên đây là 3 mẫu kệ để hàng siêu thị được sử dụng phổ biến nhất hiện nay mà giá kệ Thăng Long muốn chia sẻ để các bạn có thêm sự chọn lựa cho công việc kinh doanh của mình. Hy vọng, đây sẽ là những gợi ý bổ ích giúp cho việc kinh doanh của bạn thêm phần thuận lợi và phát triển hơn. Liên hệ với chúng tôi để được tư vấn chi tiết thêm về sản phẩm. Thông tin liên hệ mua hàng: CÔNG TY CP ĐẦU TƯ VÀ TRANG THIẾT BỊ THĂNG LONG Hotline/zalo tư vấn bán hàng: 0919.467.868 - 0964.196.611 Website: Sieuthigiake.com Khu vực Miền Bắc: Số 1 ngõ 58 Trần Bình, Mai Dịch, Cầu Giấy, Hà Nội Khu vực Miền Trung: 58 Bế Văn Đàn, Thanh Khê, Đà Nẵng Khu vực Miền Nam: Số 121 Đường bà điểm 4, ấp Tây Lân Hóc Môn HCM ( cách mặt đường Phan Văn Hớn 100m bên tay phải).
COVID-19 Impact on Industrial Safety in Semiconductors and Electronics Industry | Data Bridge Market Research
COVID-19 Impact on Industrial Safety in Semiconductors and Electronics Industry Industrial safety plays an important role in the procedures and policies implemented to ensure worker safety in different industries. The device is used to avoid various workplace hazards and, in many situations, to eliminate the cause of industrial accidents, thus protecting workers, the manufacturing environment and equipment and properties. The industrial safety system for all unsafe installations, such as oil and gas installations and nuclear plants, is important. In case of a procedure that goes over the permissible control margins, they are used to protect individual, industrial plants and the environment. The impact of COVID-19, the market is projected to have a significant impact on the current scenario; manufacturers are increasingly focusing on the value of industrial safety. However, due to lockdowns across countries, businesses are facing significant cash flow problems and are deferring new initiatives related to the introduction of industrial safety. Simon Reeve, Chief Executive Officer of Technology and Innovation at Lloyd's Register, stressed the shift in perception of the risk industry during the COVID-19 crisis, adding, "Industry is very much used to handle tangible and physical safety threats. However, Coronavirus is invisible and cannot be identified at an early stage, which has added a whole new dimension to the field of occupational health. Jim Kilpatrick, Global Supply Chain and Network Operations Chief for Deloitte Consulting, highlighted the value of moving towards digitalization and innovative approaches to building more robust supply chains. "Companies are creating digital copies of their supply chains and then digitally analyzing them through machine learning and artificial intelligence in order to optimize their supply chains and improve their productivity. In times of major challenge and crisis such as COVID-19, Workplace Safety and Health (OSH) practitioners have a vital role to play in helping business leaders, employees and governments to protect their lives and manage OSH and well-being threats, business continuity and sustainability. They work in all markets, at all levels and with organizations of all sizes and forms across the globe. The Coronavirus pandemic and the massive loss of life and human suffering is a public health problem that is testing the collective capacity of the world to respond. The protection of people is a high priority for public policy and decision makers. As part of this, conscientious workplaces are designed to protect the physical and mental health of workers, avoiding exposure to COVID-19, monitor and spread of the disease. Composing the horrible and horrific human cost of the pandemic, its socio-economic aspects are widespread and deep concern. Unemployment is a problem, underemployment, lack of social support and poverty-- make workers feel at home in the informal economy forced to do hazardous work and threaten to expose themselves and others to COVID-19. IMPACT ON DEMAND AND SUPPLY CHAIN Industrial-products and chemical-products businesses are faced with sluggish demand, supply delays and possible plant closures, which have a drastic effect on retail and purchase costs. Finally, airlines and transport companies worldwide are severely affected by the significant drop in demand for freight and passenger transport, as well as by the cancellation of events. When the business continuity plans take effect, continue to evaluate the effects on the supply chain and operations such as sync sourcing, production, distribution and delivery and repositioning inventory are constantly focused on the supplier risk programmers. Consumer staples are unable to keep up with panic shopping demand, but on a voluntary basis or due to restriction steps that have affected supply chains, production and usage, non-essential stores are shut down. For the peak demand monitoring of current capabilities, digital platforms are being followed up as fulfillment and replenishment. Read more…
Significant COVID-19 Impact on Flat Steel in Chemical and Materials Industry | Data Bridge Market Research
COVID-19 Impact on Flat Steel in Chemical and Materials Industry INTRODUCTION Flat steel products are the type of the steel which are in the form of sheets and plates. Flat steel products incorporate rolled or slabs that are a semi-finished steel commodity. In industries such as automotive, household furniture, shipbuilding and construction, flat steel products have a wide variety of applications and uses. Flat steel products are of different types which are hot rolled sheets, cold rolled sheets, coated sheets and plates. Availability of different types of flat steel products increases their uses in the building and construction of the commercial building and residential. The demand of the hot rolled sheets are more in the automobiles, construction, agricultural equipment, and machinery as the steel have the more strength which can help to increase the life span of the building and the equipment in different industries. Cold rolled sheets are more used in the domestic appliances products which are manufactured in different industries under several processes. Cold rolled sheets are can be molded and pressed in any form according to the requirement of the products. Coated sheets are the type of the flat sheets which are coated with different material which as aluminum or zinc which enhances the anticorrosion properties of steel product. Flat steel plates are being manufactured in different length and breadth according to the specific product such as in manufacturing of the industrial machine. Flat steel products can be cut in any shapes and manufactured in any dimension due to which application of the flat steel sheets products increases in automotive and construction industry. IMPACT OF COVID-19 ON FLAT STEEL MARKET The pandemic have hit the economy very hard word wide as the lockdown was imposed in all the regions which have made the situation challenging for all sector for growth and also the developing actives will be done in the stager manner. COVID-19 have also effected the import and export of the flat steel products across all the regions due to which the demand of the flat steel have decline. The demand of the flat steel have decline by 15%-17% in the COVID-19 period. The COVID-19 has affected all sectors due to which the demand of the several products in the global as well as in the domestic market has fallen down. The pandemic have resulted in the slow growth in all the sectors as the industries have been impacted by the COVID-19 situation. Government and the other higher authorities have taken the steps for the control of the spread of the COVID-19 which have been started form China and spread in all over the word. The government has done the lock down in the countries due to which production in the industries and other manufacturing sectors have fallen down. Also on the other had the demand of the finished products have also fallen down due to the lower earning of the disposable income at lower group. With the spread Coronavirus which was originated in China has started impacting ongoing building and construction projects due to which the demand of the flat steel products have fallen down. With the increasing number of Coronavirus cases in the different countries engineers and workers are not reporting at manufacturing industries of steel products due to which the production of the flat steel have fallen down in the COVID-19 period. COVID-19 have resulted in the halt in the automotive, construction industry as due to the lockdown most of the industries which used more of the flat steel products are running at half of our usual working run rate due to which demand of the flat steel products have fallen down and manufactures have to face losses during the pandemic situation. The demand of the flat steel products for the production of the domestic appliances products have fallen down by approximately 53% during the COVID-19. The demand of the flat steel has fallen down in all the regions due to the COVID-19. As the demand-supply imbalance can also be felt in Japan, South Korea, India, and the U.S. worsens due to the pandemic situation. The manufactures of the flat steel products have to face losses to the lowering demand in different sectors. Read more…