akayhelp
10+ Views

Samsung || WiFi Not Working Not Connecting In Samsung Galaxy M62

If your Samsung Galaxy M62 Phone's  WIFI Not Working. So today I will tell you its solution. So read my blog carefully. First of all, go to Settings. Then, go to General Management. Then go to Reset. Then click on Reset Network Settings. Then click on Reset Settings. No data will be deleted from here.

This will reset all network settings, including those for:

Wi-Fi
Mobile Data
Bluetooth

Put your Samsung Galaxy M62 phone's password here. But your wifi is connected to where it will disconnect. So remember that you remember your WIFI's password. Then click on the Reset Setting.

This will reset all the settings on your Samsung Galaxy M62 phone except:

Security Settings
Language Settings
Accounts
Personal Data
Settings For Downloaded Apps

After doing this, check if your problem read more...
1 Like
0 Shares
Comment
Suggested
Recent
Cards you may also be interested in
EMS Suits as Pain Relievers. Does EMS Training Really Reduce Pain?
Electrical muscle stimulation training is increasingly becoming popular due to its effectiveness in building muscles, toning, and losing weight. However, the benefits of EMS extend beyond fitness to encompass tackling pain, particularly back and knee pain. Does EMS Training Really Reduce pain? Here are some points for you. Using EMS Suit to Tackle Back Pain Back pain, notably lower back pain, is a common health problem across the globe. According to the Centers for Disease Control and Prevention (CDC), in 2018, 28% of men and 32% of women reported having experienced lower back pain at least once in the last three months. These statistics indicate the prevalence of the condition in the USA. And it is insane, to say the least. Back pain adversely affects performance at work and general well-being, lowering the quality of life. Lower back pain can either be acute, sub-acute, or chronic. There are several risk factors associated with lower back pain, including occupational posture, age, height, excessive weight, and depressive moods. Whether your back pain is linked to spending hours over a desk or a previous injury, EMS suits offer the most convenient solution to reducing your back pain and improving your quality of life. EMS Suit and Back Pain Treatment The role of EMS in relieving pain is grounded on the exercise it provides to muscles and joints. Many people do not recognize the benefits of exercising when it comes to pain reduction. There is an ongoing myth that exercising aggravates back pain and increases discomfort. However, this is not the case if your form is correct. How EMS Workouts Reduce Lower Back Pain EMS workouts strengthen muscles hence reduction of back-related pain. When the electrodes are applied to the skin above the muscles, the electrical currents intensify muscle contraction externally. EMS training suit also helps with pain management through closing the nerve “gates’ that transfer pain messages to the brain. The ability of EMS to close nerve “gates” is grounded on the “gate control” theory of pain. The gate control theory of pain hypothesizes that non-painful stimulus, for instance, electrical currents, can close nerve gates that transfer the pain signal to the brain. EMS workouts strengthen muscles, especially around the spine and the core, and improve posture, thus reducing the risk of back pain. EMS training is typically low-impact and, as such unlikely to cause unnecessary strain on joints muscles. Unlike traditional working out where you need to spend hours on end at the gym, with EMS, you only need 20 minutes every couple of days, reducing strain on muscles while allowing the body time to regenerate between sessions. As you can see, EMS suits is a progressive technique to back pain management. It is not only cheap but also time-sensitive. Order your YD Strong EMS suit at Best Electric Muscle Stimulator | EMS training Suit - Brute Suits today! EMS Suit for Knee Pain Treatment Another common type of acute and sub-acute pain globally is the patellofemoral pain syndrome, commonly referred to as “runner’s knee.” Runner’s knee is associated with pain around or under the kneecap. Pain management for a runner’s knee often encompasses a therapeutic exercise program. Patellofemoral pain syndrome occurs when nerves sense pain in the soft tissue and bone around the knee cap. EMS training is a therapy that reduces knee pain since the electrodes placed over the muscle of the affected leg provide message and mobilization. EMS workouts are, as such, also ideal for individuals recovering from a knee injury. For more visit brute suits eBay store.
COVID-19 Impact on Healthcare Robots in the Healthcare Industry
COVID-19 Impact on Healthcare Robots in the Healthcare Industry As the deaths from the COVID-19 pandemic start to increase, the World Health Organization (WHO) has urged citizens to maintain specific social distances. In an attempt to avoid the spread of COVID-19 at the population level, medical robots or healthcare robots are gradually involved in the roles of sanitizing patients' quarters, distributing medications, and supplying meals to ill people. Supplying supplies to households and delivering effective services to injured patients remained a major obstacle, and this is where healthcare robotics is creating a space for them. The new pandemic is growing in demand for healthcare robots as they play a crucial role in the process of drug distribution, patient evaluation, and medical workers' infection control. COVID-19 Market Effect The 2002-2004 SARS pandemic has indelibly altered the business climate for healthcare robots. Nearly 8,000 people were affected and 700 were killed. In addition, MERS affected 200 and killed about 40 of them. They were all limited to different territories. COVID-19, on the other hand, as a pandemic, has had a larger influence on the global economy. The SARS and MERS outbreaks contributed to a new era of creativity with the advent of disinfection robots that produce UVD light to combat against infectious viruses and bacteria on hospital surfaces. If COVID-19 continued to grow globally, UVD robots makers would expand significantly, and if the pandemic was bought under control, healthcare robots would be developed exponentially to decrease the risk of infective infection in hospitals. The healthcare robots market was expected to hit with a significant growth rate in 2020-2021. Owing to production reductions and supply distresses, the healthcare robotics demand was minimally affected in 2020. That would contribute to a decline of BPS 180. But the sector is now starting to see blue sky as the main development region such as China is beating the recession and moving up. Succeeding in the Wake of the Emergency Healthcare robots can play a critical role in the current pandemic by reducing human involvement and shielding health staff from infection. This will involve measuring patients' temperatures, disinfecting equipment, measuring specimen swabs and delivering much-needed psychological assistance to patients in isolation. Researchers are now beginning to illustrate the cyclical aspect of technology right after the recession. The COVID-19 contraction would accelerate labor-replacement automation as business sales see a fall. This might have arrived during the 'cultural shock' as automation eliminates low-skilled jobs. The prospects for healthcare robotics exist in the introduction of smart navigation and the detection of high-risk and highly contaminated environments. Wireless networking systems in healthcare can include drones, telemedicine, and decontamination with AIdriven capabilities. Healthcare robotics should see early acceptance in regions first hit by the infection, offering them an advantage. The companies in China are now doubling their revenue production from the previous years. By the time the pandemic is done, robotics should be distributed through a variety of facilities and programs. The manufacturing will experience reshoring, with decreased reliance on countries such as China, and one way to do so would be by robots that would support the robotics industry. Disinfection Robots UVD Robots, a Danish corporation located in the University of Odense and Blue Ocean Robotics, is a leading manufacturer of disinfectant robots for China in the fight against the spread of the virus. The firm signed a deal with Sunay Healthcare Supplier in February and has since delivered dozens of its self-driving robots to clean hospitals and other places with ultraviolet light. The firm claimed that this reduces the transmission of coronaviruses without exposing medical workers to the possibility of infection. Since then, the firm has marketed robots to locations in more than 50 organizations, extending its services outside China to places in Europe and the United States that are facing epidemic issues. UVD Robots frequently accepts inquiries from outside the hospital and medical institutions, including prison, offices, production floors, department shops, malls, airports, hotels, and restaurants. Dimer, located in Los Angeles, provides its GermFalcon UV-C robotics equipped to clean aircraft and its UVHammer robotic systems for hospitals and complex settings. In mid-January, the organization provided its services to the first three major U.S. airports where Chinese arrivals took place. Xenex confirmed that its LightStriken germ zapping robots became the first hotel in the U.S. to sanitize or clean guest rooms and communal areas at the Westin Houston Medical Center. The technique developed by two epidemiologists in Houston will easily kill pathogens, bacteria and fungi by utilizing strong pulsed xenon ultraviolet radiation. The MTR Company, which runs the Hong Kong subway, has confirmed that it is partnering with Avalon Biomedical (Management) Limited to build the VHP Robot, which stands for the vaporized hydrogen peroxide system. The robot conducts deep cleaning and decontamination in train compartments and stations to secure passengers and workers. More than 30 disinfection robots developed and manufactured by TMiRob, a company in Shanghai, have joined major hospitals in Wuhan, the hub of the novel coronavirus outbreak, to counter the epidemic. The white robot deployed by the firm has a hydrogen peroxide sprayer on its "front" and nine ultraviolet lamps in its "belly" and can conduct various types of disinfection in areas where humans and machines coexist, navigation hardware allows the system to clear hazards independently. Beijing-based robotics firm CloudMinds sent 14 robots to Wuhan, China, to assist with medical treatment in the wake of the coronavirus pandemic. Robots, some of which are more humanoid than others, can scrub and disinfect, distribute medications to patients and check the temperature of patients. CloudMinds contributed robotics to a number of medical institutions in China, including the Wuhan Wuchang Smart Field Clinic, which was converted from the Hong Shan Sports Centre. An Israeli-made AI robotic assistant is being used in hundreds of clinics, community centres, nursing homes and industrial buildings in Asia to eliminate human-to-human interaction as millions of people take precautions for a current coronavirus epidemic worldwide. Israeli company Robotemi, a creator of the Temi robot assistant, claims the device has already been sold to hundreds of locations throughout South East Asia, including China, Japan, South Korea, and Hong Kong. Healthcare Assistance Twelve sets of robots were provided into an intelligent hospital in Wuhan, China by CloudMinds, a supplier to A3, to support the health workers overstressed and threatened. The robots carried out many important tasks including flagging patients who had a temperature, pulse rate, and blood oxygen rates and medicine at the entrance to the field hospital. Such robots have also cleaned and disinfected the hospital areas and performed fitness exercises for patients with the disease. In addition, Chinese researchers modeled the arm of a robot on wheels that can ultrasound, swab in the mouth, and hear the noises produced by a patient's organ normally with a stethoscope. The robot will conduct these activities with cameras in the same space without having to provide medical staff. Professor Zheng Gangtie from the University of Tsinghua developed the device. Unmanned Vehicles Unmanned vehicles and other autonomous robots are deployed in China's virus-affected regions. For instance, Beijing JD Logistics has sent two unmanned L4 class vehicles to Wuhan, and engineers have driven the vehicles remotely through the cloud. Another firm, Idriverplus, has donated an unmanned transportation vehicle to Shanghai and Beijing hospitals. Amazon revealed that it will recruit 100,000 workers to deliver products in vacant warehouses to purchase during the epidemic. The area of e-commerce is now growing with the usage of robots to fill orders and this increase is projected to accelerate as more customers shop digitally, while they remain home more. Teleworking Robots The use of video and audio conference software as companies including Zoom, Microsoft (Skype) and others providing interactive meetings services has expanded with millions of citizens still operating at home because of the state and nation lockdowns. However, businesses of telepresence robotics do have greater interest of their apps, but not for the same purposes. As a consequence of the latest epidemic of coronaviruses, Ava Robotics is building handheld telepresence robots for many years. According to the CEO and cofounder of the firm, the increasing number of hospitals and nursing homes are interested in the robots, which enable the family to talk to patient and older residents on video as a consequence of the policy of 'no visits' and lock-outs in these places. Owing to the need to be simple to use on one end of the line-an aged or ill user in this situation, Ava robots are distinct from the machine enabled video-conferencing device used on a phone or a computer. The company works to make it simple for robotics setup people to click on a connection and talk to the telepresence robot instantaneously. In parallel to the robot's operation, hospitals have utilized Ava robotics, primarily for triaging through the coronavirus. For starters, the robot is configured to remotely test patients with Ava robotics after the initial appointment in one of Boston's largest hospitals. It's also the machines that patients use to reach and depart a position often-rather than people, the system will do it to save the medical equipment because a person has to wear a face mask, shoes and gloves every time instead of human operation. Initially, Czartoski, a practicing neurologist, was utilizing telemedicine in the care of stroke survivors, one of the strongest early lead for telemedicine. According to him, "If I encounter anyone with stroke signs, I will test them with a camera relatively easily to inform them if there is left side fatigue to speech problems, then I will look at the CT scan and the results then make a recommendation for the ER specialist." Virtual visits are growing in the providence. The non-profit health care network conducted nearly 100,000 virtual appointments in 2019. In 2012, the providence carried out a few hundred telemedical visits a year and was rising at a fast pace — from 12,000 in 2016 to 41,000 in 2018 to more than 100,000 last year. That figure does not explicitly reflect the usage of telemedicine in the ICU. Pharmaceutical Assistance Pharmaceutical firms tend to work on viral vaccinations or therapies and automation businesses have developed electronic tools to further simplify manual and replicate processes over the years. The robotics firms also provide options for businesses seeking to combat the COVID-19 virus. The two new modular, ready-for-assay workstations, focused on the Microlab STARlet liquid handling system, were announced recently by Hamilton Group. The latest technologies will help render the SARS-CoV-2 coronavirus that triggers the current COVID-19 quick and highly effective diagnostics, and research-based testing, said the firm. The MagEx STARlet allows the extraction of biological samples from high-performance RNA-based magnetic beads, the PCR Prep STARlet workstation is pre-configured and eligible for sample deployment utilizing recent protocols from the centers. Furthermore, the robotics designed by businesses is actually being employed in the war against coronavirus. ABB robots can be seen in this ABC news story to help a medical laboratory with the development of COVID-19 research kits. Healthcare Robots Market Synopsis The new pandemic will be targeted by health-care device vendors. They will be aligned on developing, unregulated markets with tech firms, stressing the value for national emergencies of healthcare robots. Many industries such as Enterprise Resource Planning (ERP) for higher profit margins are often impacted, in combination with robotics. Medical personnel's are predicted to become a potential phenomenon in patient events, raising the incidence of disease infections. According to the International Federation of Robotics (IFR), the shipments of medical robots already have increased by 50% in 2018. The outcome of coronavirus, however, illustrates some of the essential situations in which robotic systems may be disinfected, tracked, controlled and supplied. The World Robotics study shows that Europe is the most robot-densely inhabited region in the world with an estimated size of 114 units per 10,000 employees. In Edinberg in the United Kingdom, robotic engineers are operating on what they believe is the first safety device to speak to more than one human concurrently. The initiative was planned to support disabled citizens. Scientists say that the discovery will aim to counter potential waves of diseases such as the pandemic. Throughout the United States, the COVID-19 patients are housed at the Providence Community Medical Center throughout Washington in remote locations with two rooms. A robot, which has a microphone, a stethoscope and a camera, is being used by physicians. It helps doctors to interact individually with patients without touching. Disinfection UVD robots in China has been widely searched after as a consequence of the outbreak. The robot built by Denmark's blue ocean robot is ordered by a significant number of hospitals in the world. In the epidemic epicenter of the Wuhan outbreak, these robots played an important part. As time passes, robotics plays a significant role in fighting diseases such as COVID-19, similar to other technologies. Robot technologies will play a significant role not just in aiding patients but also in maintaining the wellbeing of physicians and healthcare staff in the case of an epidemic. The crises are changing views on what is feasible in terms of innovation and strategic intervention on the part of both private and policy players. When the COVID-19 pandemic is finished, the variety of technologies and industries are built into robotics. The virus was a successful chance for businesses to show robotics for public applications. One of the most common is the installation of mobile unmanned ultraviolet (UV) light platforms to disinfect facilities. Danish business UVD Robotics is taking advantage of this potential and is increasing the application of robotics to clean hospitals. The U.S. based Germ Falcon provides identical UV disinfection approaches for airplanes, while Chinese TMiRob deploys UV disinfection robots in Wuhan. "Automation of disinfection is a vital aspect of preserving health and safety and maybe one of the big bright points in reaction to COVID-19. In the near term, the policymakers would need to improve their defense apparatuses as well as the effectiveness of their medical services in order to implement quarantine mandates. The robots should be crucial to doing this by disinfection, tracking and surveillance. Throughout the long run, COVID-19 is contributing to a major reassessment of the worldwide supply chain in production. America's reliance on Chinese imports of essential machinery and drugs is becoming a controversial problem, and policy officials are now seeing the crisis as an incentive to revitalize the drive to re-launch more manufacturing resources on the domestic sector. Whether that turns into more drastic intervention by policymakers to diversify or re-land the output of key products, it may very well bode for the robotics sector, because these reforms will entail substantial rises in CAPEX and efficiency gains in developing countries. Instead of the infectivity of COVID-19, it is better if human-to-human interaction is minimal. Since robots are free for contamination, software companies such as JD.com and others have invested to get more robots marching down the main street to provide medical equipment in healthcare settings. The robots often end up becoming critical when providing vital items to individuals who order and purchase digitally and are lonely at home. Meituan Dianping, a logistics platform, is growing the 'contactless shipping' choices by automated vehicles and robots. Shenzhen-based company Pudu Technology aimed to reduce cross-infection by introducing a robotic home distribution of medications and food. COVID-19 poses a nightmare for robotic manufacturers designing applications for emerging economies in the automotive, construction and supply chain industries. But for vendors targeting markets which that are closer to government, such as safety, education, and protection, this is a great opportunity. Whitton advises that 'the market players create tailored solutions for non-manufacturing use cases or aim to create integrated solutions to allow scale-up in the manufacture of medical supplies. To mobile robotics manufacturers and tech firms pursuing more global markets, this is a perfect chance to demonstrate the role of healthcare robotics in solving national crises as well as alleviating economic shock.
How COVID-19 Impacted on Educational Robots in Semiconductors & Electronics Industry ?
COVID-19 Impact on Educational Robots in Semiconductors and Electronics Industry The COVID-19 virus originated in China in late 2019 was a massive blow to the world, spreading rampantly and hitting every nation. The largest economies have been hit and slowed down, forcing everyone to quarantine and fight for their lives. The worst-hit countries being the U.S. and followed by India, Brazil, and major European countries, which drive the world economy has caused an economic slowdown. Economic activity among advanced economies shrank 7% in 2020 as domestic demand and supply, trade, and finance have been severely disrupted. Emerging market and developing economies (EMDEs) are expected to shrink by 2.5% this year, their first contraction as a group in at least sixty years. Per capita incomes are expected to decline by 3.6%, which will tip millions of people into extreme poverty this year. Platforms such as BYJU’S, a Bangalore-based educational technology and online tutoring firm founded in 2011, have become world’s most highly valued edtech company. Since announcing free live classes on its Think and Learn app, BYJU’s has seen a 200% increase in the number of new students using its products. Ten cent classroom, meanwhile, has been used extensively since mid-February after the Chinese government instructed a quarter of a billion full-time students to resume their studies through online platforms. This resulted in the largest “online movement” in the history of education, with approximately 730,000, or 81% of K-12 students, attending classes via the Ten cent K-12 Online School in Wuhan. The pandemic has forced many activities to be remote, and the work from home culture is developed. Like every activity the education sector has also taken, the remote approach and e-learning have been rising in this pandemic situation. While countries are at different points in their COVID-19 infection rates worldwide, there are currently more than 1.2 billion children in 186 countries affected by school closures due to the pandemic. Even before COVID-19, there was already high growth and adoption in education technology, with global edtech investments reaching USD 18.66 billion in 2019 and the overall market for online education projected to reach USD 350 Billion by 2025. Whether it is language apps, virtual tutoring, video conferencing tools, or online learning software, there has been a significant surge in usage since COVID-19. Co-founder of Digital Bodies Maya Georgieva summarizes the change succinctly: “We’re moving from the information age to the experience age.” As every field moves into the new 4IR era, the adoption and application of the new and emerging technologies are changing expectations and opportunities for the new college graduates. The online education market has seen a significant rise amidst the pandemic, but education is only learning or theoretical based. There is still a majority of the education, which is practical based or hands-on training, facing many difficulties. What previously had been a hands-on, manual process has often become, in this 4IR world, a technology-assisted, robotic or virtual practice. For instance, telemedicine, virtual reality (VR), augmented reality (AR), and extended reality (XR) technologies are now essential tools in health care. They supplant some of the physical and manual diagnostic practices of the past. The Fourth Industrial Revolution is a way of describing the blurring of boundaries between the physical, digital, and biological worlds. It’s a fusion of advances in artificial intelligence (AI), robotics, the Internet of Things (IoT), 3D printing, genetic engineering, quantum computing, and other technologies. It’s the collective force behind many products and services that are fast becoming indispensable to modern life. Educational Robot One such training-based sector is the educational robots used to train engineering graduates in their application and working as Educational Robots range from small kits that can be built at home for kids and a great entry point for the robotics sector to the more advanced industrial robots with robust mechanisms and sophisticated software to control the movements. The robotics kit market is on the rise as the educational institutes are shifted to E-Learning and access to the institute laboratories is impossible. The robotics kit being cheap and affordable is the focus for distance education as each student can own a kit of the basic components for practice. The educational robot market and is poised to grow by 590.82 thousand units during 2020-2024, progressing at a CAGR of almost 28%. By 2022, an operational stock of almost 4 million industrial robots is expected to work in factories worldwide. These robots will play a vital role in automating production to speed up the post-Corona economy. The positive effects of the pandemic are the growing interest in robotics and automation. Industrial sectors and organizations that had been reluctant to invest in this technology are showing renewed interest. Additionally, the IFR has registered an increased number of media requests resulting in an all-time high in press citations. Robots will play a vital role in automating production and accelerating the post-pandemic economy. At the same time, robots are driving the demand for skilled workers. Governments and companies worldwide must focus on providing the right skills necessary to work with robots and intelligent automation systems. BLUE FROG ROBOTICS & BUDDY, fischerwerke GmbH & Co. KG, Innovation First International Inc., LEGO System AS, Make block, Modular Robotics Incorporated, PAL Robotics, Pitsco Inc., ROBOTIS Co. Ltd., and SoftBank Group Corp., are some of the major market participants. Conclusion The COVID-19 pandemic has hit many industries forcing remote work, which is beneficial for the IT industry but very detrimental for the manufacturing sector. The manufacturing industry equipped with remote work capabilities such as industries revolutionized by industry 4.0, were less affected comparatively. The core of industry 4.0 is the use of robots and IoT, which is new to many and the educational institutes are equipping themselves with this new technology. The educational robots that were on the rise before the pandemic have been hit, and industrial robotics is stagnant amidst which the small robotics kit industry is on the rise as it is affordable and can be acquired by individual students. Many industries are adopting automation and robotics and require a skilled workforce equipped with the same knowledge. This has given a boost and motivation to many educational institutes to adopt robotics in the curriculum. Although the market is stagnant for the educational robots market amidst the pandemic, it is forecast to rise exponentially in the next few years.
How Price Optimization Benefits Retail Businesses?
A perfect price is an ever-changing business target. Identifying the real value of the products relies on many internal as well as external factors. Brand value, cost, promotional activities, competition, product life cycle, government policies, targeted consumers, and financial conditions – all these factors affect the pricing. Therefore, making an effective and convincing price optimization strategy for your potential clients needs a lot of research. Finest pricing strategies are made with keeping the customers in mind. Today’s consumers are very clever. They check as well as compare pricing online before making any buying decision. Furthermore, they anticipate personalized offers depending on their buying history. To please today’s smart customers, a lethargic pricing approach like adding the mark-up percentage into product cost won’t work. Now, the retailers have realized that any successful sales happen through product pricing in the way, which justifies its values. So, marketing trends are flowing away from usual practices of just offering discounts. Nowadays, it is slanting more towards accurate product pricing. Customers don’t care much about the prices as they care about your products. If one right product is offered at authentic and real pricing, it will surely become successful. Why Should You Do Price Optimization? Price optimization is the sweetened spot between getting profits as well as appealing to a keen customer. This helps a company to completely use a consumer’s expenditure potential, how and when they spend. These consumer purchasing habits permit a company to increase profits in new ways if analyzed as well as used properly and it is much better than merely judging the success of any product depending on its earlier performances. Using price optimization has many advantages like: 1. Greater Profits A Spanish apparel retailer is an example of long-term success. It has a committed team of product managers and designers to make sure a well-organized system replaces existing items within only two weeks, helping the company to provide exactly what customers need. For this retailer, to price the products is the most important as it leads towards profits and also assists them in managing inventories, reducing market downs, as well as get greater margins. 2. Challenging the Competition To be competitive as well as optimize product pricing, companies like Amazon uses a dynamic pricing model. The majority of retail businesses regulate the prices of products many times a day depending on market situations. A dynamic price strategy gets a score of competitors’ prices. This automatically provides the finest price to get the targeted market share. An Amazon Case Study made by Boomerang displayed that Amazon price-tested a well-known Samsung TV valued at $350 for 6 months before discounted that to $250 during Black Friday. This price point weakened competitors, as well as Amazon, which can take many businesses under the noses. You may surprise by what is wonderful about pocketing a competitor’s business through quoting at a lower price. For making the discounts provided for the TVs, Amazon has increased the pricing of the HDMI cable, which people generally purchase with the TVs. They correctly predicted that lesser popular items wouldn’t affect the price insights as the TVs would. Therefore, they go ahead with a price increase that provides much more profit. Implementing price optimization models for any business has become a requirement these days. In reality, businesses, which fail in keeping up with their competitors are expected to go down soon. Service-based industries including Hospitality, Travel, and E-commerce, are a few of the most passionate users of retail price optimization. These businesses succeed using dynamic pricing. For instance, Airlines observe the dates of departure, purchase, buying location, and time left till the flight, affluence levels, as well as other details. Relying on all the factors, the flight tickets pricing can fluctuate intensely might be even from one customer to the other. Why You Must Not Use Any General Pricing Model? It’s not possible to create price optimization tools overnight for any business. It needs lots of experimentations to get the right strategies, which maximize your business objective. And that’s why a general pricing model will not assist in getting the right prices. Discovering new pricing models means testing with many things like demands for every product at certain discounted percentages or how much you can increase the product price till the market stops to support you. Also, creating your personal pricing model would help you make dashboards, which are appropriate for your business. This is extremely advantageous because this will demonstrate the analytics you take care of. In contrast, proprietary tools have dashboard items, which are general for most businesses. Proprietary tools offer limited opportunities for customizations. All businesses have their unique customers and have their own sets of season-specific, industry-specific, and market-specific requirements. A general price optimization tool is not well-equipped to meet all these exclusive demands. How to Do Price Optimization Effectively? Getting the right prices shouldn’t feel like flinging darts blindfolded. Therefore, you should find out a price optimization in retail, which perfectly matches your business. 1. Goal Setting Every business is having its own purposes and pricing decisions, which drive a plan have to reflect them. Creating a pricing model would help you evaluate your present capabilities as well as get the areas, which require improvements. The goals in the product pricing could be anyone from the following: Gaining maximum profits via maximum sales Getting stability in profit margins Increasing or maintaining the market shares Receiving a suitable ROI Safeguarding price stability Thrashing the competition Creating goals will certainly help your business by getting better ROI and profit margins. 2. Identify Categories and Groups When you find the right price objective, you can select the category that you need to test your pricing on. Possibly, it needs to be a higher-volume category in which sales take place in huge numbers. For instance, if you sell apparel, you can use denim jackets as an experiment group in which the prices are changed. Similarly, leather coats could be used as a control group in which the pricing stays constant. A category you select should be related to collect valuable and meaningful data about customer reactions to pricing changes. 3. Data Collection The mainstay of any price optimization model is its data-driven framework. The model predicts as well as measures the responses of prospective buyers to various prices of a service or product. To create a price optimization model, data are needed like: Competitor’s Data Customer Survey Data Historic Sales Data Inventory Operating Costs By the way, most of the data is accessible in your business. Competitor’s data could be obtained using web scraping. Using competitive pricing data is important in knowing how your pricing changes affect their behavior. In addition, this also assists your business to find benchmarks for the pricing strategy. When you have data, it’s easy to set superior prices for certain products in the research group depending on competitors’ pricing and your present objectives. 4. Price Testing Price testing provides opportunities for your business to quicken its growth. Preferably, experimentation should give actionable insights with more options. Moreover, the pricing procedure doesn’t need to be extremely complex. Easy business experiments like price adjustment or running certain ads when a competitor’s items get sold out etc. would work well. A test-and-learn technique is the finest course of action for businesses that are discovering a pricing model. It means that you get one action using an experiment group, make a diverse action with the controlled group, and compare the outcomes. This approach makes the procedure easy. Accordingly, the results become easily applicable. 5. Analyze, Study and Improve Finally, you need to analyze how a change in pricing affects the bottom line. The change in the everyday averages of important metrics like revenue and profit before & after the experiments is a very good pointer to the failure or success of a pricing test. The capability of automating pricing has allowed companies to improve pricing for additional products than the majority of organizations get possible. If you want to understand more about how a product’s price optimization can benefit a retail business, contact X-Byte Enterprise Crawling, the best data scrapers. Visit- X-Byte Enterprise Crawling https://www.xbyte.io/contact-us.php
Steps to Ensure Smooth HP Officejet Pro 6968 Wireless Setup
The HP Officejet Pro 6968 Wireless Setup enables its users to perform the operation of printing smoothly and effectively. It is a wireless setup through which you can connect your printer and computer to the same network. The printer allows you to connect numerous devices to it and print. Users can face some problems in configuring it to set it up. Read the steps for doing it correctly. How To Download HP Officejet Pro 6968 Printer Driver? For the proper operation of your printer, you need to install the printer driver. Turn on both your computer and printer. Figure out the operating system of your computer. Download the driver. The methodology for downloading the driver is mentioned below. Visit the HP website. Download the setup files from the website. Run the setup file after it is ready. Follow the specifications that appear on the screen. Connect your USB to the HP printer as well as the computer. Adhere to the specifications you see on the screen. Input the values in the wizard. You can test how your printer is functioning. The Right Way to Connect HP Officejet Pro 6968 to Wireless Follow the given steps to connect your new printer to the wireless. Find out the place where you can place your print so that it's near to a wireless network. It will enable you to link your printer easily and receive a strong signal. Register your router's password and network name. Choose the Wireless icon on the Control Panel of your printer, and turn on its Wi-Fi feature. Choose Connect to Network and wait for some minutes while the printer detects the list of networks and displays it on the screen. Select your network name and the key in the router's password. The connection is now established. Don't forget to connect your PC to that same wireless network. How to Link to HP Officejet Pro 6968 to Your Computer You can connect your HP printer to the computer by following a few easy steps. Firstly, turn on the printer and keep it close to your router. To link your printer with a wireless network, follow the below-mentioned steps. Open your driver installation to make for the HP Officejet Pro 6968 Wireless Setup. While installing the application, you will be asked to choose a connection type. Meanwhile, take the USB cable that was there in the printer package and keep it ready for use. After you complete the second step, you will see a window that will ask you to set up a connection with USB. Connect your USB cable with your Officejet printer. Next, attach the computer with the USB. After your connection is complete, click the OK button. For confirming the connection, you can print the test page. The Right Way to Connect HP Officejet Pro 6968 to Your Mac Take the following steps to link the Mac to the Officejet printer. Download the Mac printer driver and open it. Copy the printer driver to flash drive through a CD. Place the USB on your Mac and initialize the process. Visit the Apple menu and choose the preference for the system. Select Print and Fax. Your connection is now established. Summing up The article sums up easy ways by which you can set up and connect your HP Officejet Pro 6968 printer. Read them carefully for a seamless printer setting up process. In case you have any queries, you can contact customer support. REF Link: https://qr.ae/pGwIL9
[June-2021]Braindump2go New Professional-Cloud-Architect PDF and VCE Dumps Free Share(Q200-Q232)
QUESTION 200 You are monitoring Google Kubernetes Engine (GKE) clusters in a Cloud Monitoring workspace. As a Site Reliability Engineer (SRE), you need to triage incidents quickly. What should you do? A.Navigate the predefined dashboards in the Cloud Monitoring workspace, and then add metrics and create alert policies. B.Navigate the predefined dashboards in the Cloud Monitoring workspace, create custom metrics, and install alerting software on a Compute Engine instance. C.Write a shell script that gathers metrics from GKE nodes, publish these metrics to a Pub/Sub topic, export the data to BigQuery, and make a Data Studio dashboard. D.Create a custom dashboard in the Cloud Monitoring workspace for each incident, and then add metrics and create alert policies. Answer: D QUESTION 201 You are implementing a single Cloud SQL MySQL second-generation database that contains business-critical transaction data. You want to ensure that the minimum amount of data is lost in case of catastrophic failure. Which two features should you implement? (Choose two.) A.Sharding B.Read replicas C.Binary logging D.Automated backups E.Semisynchronous replication Answer: CD QUESTION 202 You are working at a sports association whose members range in age from 8 to 30. The association collects a large amount of health data, such as sustained injuries. You are storing this data in BigQuery. Current legislation requires you to delete such information upon request of the subject. You want to design a solution that can accommodate such a request. What should you do? A.Use a unique identifier for each individual. Upon a deletion request, delete all rows from BigQuery with this identifier. B.When ingesting new data in BigQuery, run the data through the Data Loss Prevention (DLP) API to identify any personal information. As part of the DLP scan, save the result to Data Catalog. Upon a deletion request, query Data Catalog to find the column with personal information. C.Create a BigQuery view over the table that contains all data. Upon a deletion request, exclude the rows that affect the subject's data from this view. Use this view instead of the source table for all analysis tasks. D.Use a unique identifier for each individual. Upon a deletion request, overwrite the column with the unique identifier with a salted SHA256 of its value. Answer: B QUESTION 203 Your company has announced that they will be outsourcing operations functions. You want to allow developers to easily stage new versions of a cloud-based application in the production environment and allow the outsourced operations team to autonomously promote staged versions to production. You want to minimize the operational overhead of the solution. Which Google Cloud product should you migrate to? A.App Engine B.GKE On-Prem C.Compute Engine D.Google Kubernetes Engine Answer: D QUESTION 204 Your company is running its application workloads on Compute Engine. The applications have been deployed in production, acceptance, and development environments. The production environment is business-critical and is used 24/7, while the acceptance and development environments are only critical during office hours. Your CFO has asked you to optimize these environments to achieve cost savings during idle times. What should you do? A.Create a shell script that uses the gcloud command to change the machine type of the development and acceptance instances to a smaller machine type outside of office hours. Schedule the shell script on one of the production instances to automate the task. B.Use Cloud Scheduler to trigger a Cloud Function that will stop the development and acceptance environments after office hours and start them just before office hours. C.Deploy the development and acceptance applications on a managed instance group and enable autoscaling. D.Use regular Compute Engine instances for the production environment, and use preemptible VMs for the acceptance and development environments. Answer: D QUESTION 205 You are moving an application that uses MySQL from on-premises to Google Cloud. The application will run on Compute Engine and will use Cloud SQL. You want to cut over to the Compute Engine deployment of the application with minimal downtime and no data loss to your customers. You want to migrate the application with minimal modification. You also need to determine the cutover strategy. What should you do? A.1. Set up Cloud VPN to provide private network connectivity between the Compute Engine application and the on-premises MySQL server. 2. Stop the on-premises application. 3. Create a mysqldump of the on-premises MySQL server. 4. Upload the dump to a Cloud Storage bucket. 5. Import the dump into Cloud SQL. 6. Modify the source code of the application to write queries to both databases and read from its local database. 7. Start the Compute Engine application. 8. Stop the on-premises application. B.1. Set up Cloud SQL proxy and MySQL proxy. 2. Create a mysqldump of the on-premises MySQL server. 3. Upload the dump to a Cloud Storage bucket. 4. Import the dump into Cloud SQL. 5. Stop the on-premises application. 6. Start the Compute Engine application. C.1. Set up Cloud VPN to provide private network connectivity between the Compute Engine application and the on-premises MySQL server. 2. Stop the on-premises application. 3. Start the Compute Engine application, configured to read and write to the on-premises MySQL server. 4. Create the replication configuration in Cloud SQL. 5. Configure the source database server to accept connections from the Cloud SQL replica. 6. Finalize the Cloud SQL replica configuration. 7. When replication has been completed, stop the Compute Engine application. 8. Promote the Cloud SQL replica to a standalone instance. 9. Restart the Compute Engine application, configured to read and write to the Cloud SQL standalone instance. D.1. Stop the on-premises application. 2. Create a mysqldump of the on-premises MySQL server. 3. Upload the dump to a Cloud Storage bucket. 4. Import the dump into Cloud SQL. 5. Start the application on Compute Engine. Answer: A QUESTION 206 Your organization has decided to restrict the use of external IP addresses on instances to only approved instances. You want to enforce this requirement across all of your Virtual Private Clouds (VPCs). What should you do? A.Remove the default route on all VPCs. Move all approved instances into a new subnet that has a default route to an internet gateway. B.Create a new VPC in custom mode. Create a new subnet for the approved instances, and set a default route to the internet gateway on this new subnet. C.Implement a Cloud NAT solution to remove the need for external IP addresses entirely. D.Set an Organization Policy with a constraint on constraints/compute.vmExternalIpAccess. List the approved instances in the allowedValues list. Answer: D QUESTION 207 Your company uses the Firewall Insights feature in the Google Network Intelligence Center. You have several firewall rules applied to Compute Engine instances. You need to evaluate the efficiency of the applied firewall ruleset. When you bring up the Firewall Insights page in the Google Cloud Console, you notice that there are no log rows to display. What should you do to troubleshoot the issue? A.Enable Virtual Private Cloud (VPC) flow logging. B.Enable Firewall Rules Logging for the firewall rules you want to monitor. C.Verify that your user account is assigned the compute.networkAdmin Identity and Access Management (IAM) role. D.Install the Google Cloud SDK, and verify that there are no Firewall logs in the command line output. Answer: B QUESTION 208 Your company has sensitive data in Cloud Storage buckets. Data analysts have Identity Access Management (IAM) permissions to read the buckets. You want to prevent data analysts from retrieving the data in the buckets from outside the office network. What should you do? A.1. Create a VPC Service Controls perimeter that includes the projects with the buckets. 2. Create an access level with the CIDR of the office network. B.1. Create a firewall rule for all instances in the Virtual Private Cloud (VPC) network for source range. 2. Use the Classless Inter-domain Routing (CIDR) of the office network. C.1. Create a Cloud Function to remove IAM permissions from the buckets, and another Cloud Function to add IAM permissions to the buckets. 2. Schedule the Cloud Functions with Cloud Scheduler to add permissions at the start of business and remove permissions at the end of business. D.1. Create a Cloud VPN to the office network. 2. Configure Private Google Access for on-premises hosts. Answer: C QUESTION 209 You have developed a non-critical update to your application that is running in a managed instance group, and have created a new instance template with the update that you want to release. To prevent any possible impact to the application, you don't want to update any running instances. You want any new instances that are created by the managed instance group to contain the new update. What should you do? A.Start a new rolling restart operation. B.Start a new rolling replace operation. C.Start a new rolling update. Select the Proactive update mode. D.Start a new rolling update. Select the Opportunistic update mode. Answer: C QUESTION 210 Your company is designing its application landscape on Compute Engine. Whenever a zonal outage occurs, the application should be restored in another zone as quickly as possible with the latest application data. You need to design the solution to meet this requirement. What should you do? A.Create a snapshot schedule for the disk containing the application data. Whenever a zonal outage occurs, use the latest snapshot to restore the disk in the same zone. B.Configure the Compute Engine instances with an instance template for the application, and use a regional persistent disk for the application data. Whenever a zonal outage occurs, use the instance template to spin up the application in another zone in the same region. Use the regional persistent disk for the application data. C.Create a snapshot schedule for the disk containing the application data. Whenever a zonal outage occurs, use the latest snapshot to restore the disk in another zone within the same region. D.Configure the Compute Engine instances with an instance template for the application, and use a regional persistent disk for the application data. Whenever a zonal outage occurs, use the instance template to spin up the application in another region. Use the regional persistent disk for the application data, Answer: D QUESTION 211 Your company has just acquired another company, and you have been asked to integrate their existing Google Cloud environment into your company's data center. Upon investigation, you discover that some of the RFC 1918 IP ranges being used in the new company's Virtual Private Cloud (VPC) overlap with your data center IP space. What should you do to enable connectivity and make sure that there are no routing conflicts when connectivity is established? A.Create a Cloud VPN connection from the new VPC to the data center, create a Cloud Router, and apply new IP addresses so there is no overlapping IP space. B.Create a Cloud VPN connection from the new VPC to the data center, and create a Cloud NAT instance to perform NAT on the overlapping IP space. C.Create a Cloud VPN connection from the new VPC to the data center, create a Cloud Router, and apply a custom route advertisement to block the overlapping IP space. D.Create a Cloud VPN connection from the new VPC to the data center, and apply a firewall rule that blocks the overlapping IP space. Answer: A QUESTION 212 You need to migrate Hadoop jobs for your company's Data Science team without modifying the underlying infrastructure. You want to minimize costs and infrastructure management effort. What should you do? A.Create a Dataproc cluster using standard worker instances. B.Create a Dataproc cluster using preemptible worker instances. C.Manually deploy a Hadoop cluster on Compute Engine using standard instances. D.Manually deploy a Hadoop cluster on Compute Engine using preemptible instances. Answer: A QUESTION 213 Your company has a project in Google Cloud with three Virtual Private Clouds (VPCs). There is a Compute Engine instance on each VPC. Network subnets do not overlap and must remain separated. The network configuration is shown below. Instance #1 is an exception and must communicate directly with both Instance #2 and Instance #3 via internal IPs. How should you accomplish this? A.Create a cloud router to advertise subnet #2 and subnet #3 to subnet #1. B.Add two additional NICs to Instance #1 with the following configuration: • NIC1 ○ VPC: VPC #2 ○ SUBNETWORK: subnet #2 • NIC2 ○ VPC: VPC #3 ○ SUBNETWORK: subnet #3 Update firewall rules to enable traffic between instances. C.Create two VPN tunnels via CloudVPN: • 1 between VPC #1 and VPC #2. • 1 between VPC #2 and VPC #3. Update firewall rules to enable traffic between the instances. D.Peer all three VPCs: • Peer VPC #1 with VPC #2. • Peer VPC #2 with VPC #3. Update firewall rules to enable traffic between the instances. Answer: B QUESTION 214 You need to deploy an application on Google Cloud that must run on a Debian Linux environment. The application requires extensive configuration in order to operate correctly. You want to ensure that you can install Debian distribution updates with minimal manual intervention whenever they become available. What should you do? A.Create a Compute Engine instance template using the most recent Debian image. Create an instance from this template, and install and configure the application as part of the startup script. Repeat this process whenever a new Google-managed Debian image becomes available. B.Create a Debian-based Compute Engine instance, install and configure the application, and use OS patch management to install available updates. C.Create an instance with the latest available Debian image. Connect to the instance via SSH, and install and configure the application on the instance. Repeat this process whenever a new Google-managed Debian image becomes available. D.Create a Docker container with Debian as the base image. Install and configure the application as part of the Docker image creation process. Host the container on Google Kubernetes Engine and restart the container whenever a new update is available. Answer: B QUESTION 215 You have an application that runs in Google Kubernetes Engine (GKE). Over the last 2 weeks, customers have reported that a specific part of the application returns errors very frequently. You currently have no logging or monitoring solution enabled on your GKE cluster. You want to diagnose the problem, but you have not been able to replicate the issue. You want to cause minimal disruption to the application. What should you do? A.1. Update your GKE cluster to use Cloud Operations for GKE. 2. Use the GKE Monitoring dashboard to investigate logs from affected Pods. B.1. Create a new GKE cluster with Cloud Operations for GKE enabled. 2. Migrate the affected Pods to the new cluster, and redirect traffic for those Pods to the new cluster. 3. Use the GKE Monitoring dashboard to investigate logs from affected Pods. C.1. Update your GKE cluster to use Cloud Operations for GKE, and deploy Prometheus. 2. Set an alert to trigger whenever the application returns an error. D.1. Create a new GKE cluster with Cloud Operations for GKE enabled, and deploy Prometheus. 2. Migrate the affected Pods to the new cluster, and redirect traffic for those Pods to the new cluster. 3. Set an alert to trigger whenever the application returns an error. Answer: C QUESTION 216 You need to deploy a stateful workload on Google Cloud. The workload can scale horizontally, but each instance needs to read and write to the same POSIX filesystem. At high load, the stateful workload needs to support up to 100 MB/s of writes. What should you do? A.Use a persistent disk for each instance. B.Use a regional persistent disk for each instance. C.Create a Cloud Filestore instance and mount it in each instance. D.Create a Cloud Storage bucket and mount it in each instance using gcsfuse. Answer: D QUESTION 217 Your company has an application deployed on Anthos clusters (formerly Anthos GKE) that is running multiple microservices. The cluster has both Anthos Service Mesh and Anthos Config Management configured. End users inform you that the application is responding very slowly. You want to identify the microservice that is causing the delay. What should you do? A.Use the Service Mesh visualization in the Cloud Console to inspect the telemetry between the microservices. B.Use Anthos Config Management to create a ClusterSelector selecting the relevant cluster. On the Google Cloud Console page for Google Kubernetes Engine, view the Workloads and filter on the cluster. Inspect the configurations of the filtered workloads. C.Use Anthos Config Management to create a namespaceSelector selecting the relevant cluster namespace. On the Google Cloud Console page for Google Kubernetes Engine, visit the workloads and filter on the namespace. Inspect the configurations of the filtered workloads. D.Reinstall istio using the default istio profile in order to collect request latency. Evaluate the telemetry between the microservices in the Cloud Console. Answer: A QUESTION 218 You are working at a financial institution that stores mortgage loan approval documents on Cloud Storage. Any change to these approval documents must be uploaded as a separate approval file, so you want to ensure that these documents cannot be deleted or overwritten for the next 5 years. What should you do? A.Create a retention policy on the bucket for the duration of 5 years. Create a lock on the retention policy. B.Create the bucket with uniform bucket-level access, and grant a service account the role of Object Writer. Use the service account to upload new files. C.Use a customer-managed key for the encryption of the bucket. Rotate the key after 5 years. D.Create the bucket with fine-grained access control, and grant a service account the role of Object Writer. Use the service account to upload new files. Answer: A QUESTION 219 Your team will start developing a new application using microservices architecture on Kubernetes Engine. As part of the development lifecycle, any code change that has been pushed to the remote develop branch on your GitHub repository should be built and tested automatically. When the build and test are successful, the relevant microservice will be deployed automatically in the development environment. You want to ensure that all code deployed in the development environment follows this process. What should you do? A.Have each developer install a pre-commit hook on their workstation that tests the code and builds the container when committing on the development branch. After a successful commit, have the developer deploy the newly built container image on the development cluster. B.Install a post-commit hook on the remote git repository that tests the code and builds the container when code is pushed to the development branch. After a successful commit, have the developer deploy the newly built container image on the development cluster. C.Create a Cloud Build trigger based on the development branch that tests the code, builds the container, and stores it in Container Registry. Create a deployment pipeline that watches for new images and deploys the new image on the development cluster. Ensure only the deployment tool has access to deploy new versions. D.Create a Cloud Build trigger based on the development branch to build a new container image and store it in Container Registry. Rely on Vulnerability Scanning to ensure the code tests succeed. As the final step of the Cloud Build process, deploy the new container image on the development cluster. Ensure only Cloud Build has access to deploy new versions. Answer: A QUESTION 220 Your operations team has asked you to help diagnose a performance issue in a production application that runs on Compute Engine. The application is dropping requests that reach it when under heavy load. The process list for affected instances shows a single application process that is consuming all available CPU, and autoscaling has reached the upper limit of instances. There is no abnormal load on any other related systems, including the database. You want to allow production traffic to be served again as quickly as possible. Which action should you recommend? A.Change the autoscaling metric to agent.googleapis.com/memory/percent_used. B.Restart the affected instances on a staggered schedule. C.SSH to each instance and restart the application process. D.Increase the maximum number of instances in the autoscaling group. Answer: A QUESTION 221 You are implementing the infrastructure for a web service on Google Cloud. The web service needs to receive and store the data from 500,000 requests per second. The data will be queried later in real time, based on exact matches of a known set of attributes. There will be periods where the web service will not receive any requests. The business wants to keep costs low. Which web service platform and database should you use for the application? A.Cloud Run and BigQuery B.Cloud Run and Cloud Bigtable C.A Compute Engine autoscaling managed instance group and BigQuery D.A Compute Engine autoscaling managed instance group and Cloud Bigtable Answer: D QUESTION 222 You are developing an application using different microservices that should remain internal to the cluster. You want to be able to configure each microservice with a specific number of replicas. You also want to be able to address a specific microservice from any other microservice in a uniform way, regardless of the number of replicas the microservice scales to. You need to implement this solution on Google Kubernetes Engine. What should you do? A.Deploy each microservice as a Deployment. Expose the Deployment in the cluster using a Service, and use the Service DNS name to address it from other microservices within the cluster. B.Deploy each microservice as a Deployment. Expose the Deployment in the cluster using an Ingress, and use the Ingress IP address to address the Deployment from other microservices within the cluster. C.Deploy each microservice as a Pod. Expose the Pod in the cluster using a Service, and use the Service DNS name to address the microservice from other microservices within the cluster. D.Deploy each microservice as a Pod. Expose the Pod in the cluster using an Ingress, and use the Ingress IP address name to address the Pod from other microservices within the cluster. Answer: A QUESTION 223 Your company has a networking team and a development team. The development team runs applications on Compute Engine instances that contain sensitive data. The development team requires administrative permissions for Compute Engine. Your company requires all network resources to be managed by the networking team. The development team does not want the networking team to have access to the sensitive data on the instances. What should you do? A.1. Create a project with a standalone VPC and assign the Network Admin role to the networking team. 2. Create a second project with a standalone VPC and assign the Compute Admin role to the development team. 3. Use Cloud VPN to join the two VPCs. B.1. Create a project with a standalone Virtual Private Cloud (VPC), assign the Network Admin role to the networking team, and assign the Compute Admin role to the development team. C.1. Create a project with a Shared VPC and assign the Network Admin role to the networking team. 2. Create a second project without a VPC, configure it as a Shared VPC service project, and assign the Compute Admin role to the development team. D.1. Create a project with a standalone VPC and assign the Network Admin role to the networking team. 2. Create a second project with a standalone VPC and assign the Compute Admin role to the development team. 3. Use VPC Peering to join the two VPCs. Answer: C QUESTION 224 Your company wants you to build a highly reliable web application with a few public APIs as the backend. You don't expect a lot of user traffic, but traffic could spike occasionally. You want to leverage Cloud Load Balancing, and the solution must be cost-effective for users. What should you do? A.Store static content such as HTML and images in Cloud CDN. Host the APIs on App Engine and store the user data in Cloud SQL. B.Store static content such as HTML and images in a Cloud Storage bucket. Host the APIs on a zonal Google Kubernetes Engine cluster with worker nodes in multiple zones, and save the user data in Cloud Spanner. C.Store static content such as HTML and images in Cloud CDN. Use Cloud Run to host the APIs and save the user data in Cloud SQL. D.Store static content such as HTML and images in a Cloud Storage bucket. Use Cloud Functions to host the APIs and save the user data in Firestore. Answer: B QUESTION 225 Your company sends all Google Cloud logs to Cloud Logging. Your security team wants to monitor the logs. You want to ensure that the security team can react quickly if an anomaly such as an unwanted firewall change or server breach is detected. You want to follow Google-recommended practices. What should you do? A.Schedule a cron job with Cloud Scheduler. The scheduled job queries the logs every minute for the relevant events. B.Export logs to BigQuery, and trigger a query in BigQuery to process the log data for the relevant events. C.Export logs to a Pub/Sub topic, and trigger Cloud Function with the relevant log events. D.Export logs to a Cloud Storage bucket, and trigger Cloud Run with the relevant log events. Answer: C QUESTION 226 You have deployed several instances on Compute Engine. As a security requirement, instances cannot have a public IP address. There is no VPN connection between Google Cloud and your office, and you need to connect via SSH into a specific machine without violating the security requirements. What should you do? A.Configure Cloud NAT on the subnet where the instance is hosted. Create an SSH connection to the Cloud NAT IP address to reach the instance. B.Add all instances to an unmanaged instance group. Configure TCP Proxy Load Balancing with the instance group as a backend. Connect to the instance using the TCP Proxy IP. C.Configure Identity-Aware Proxy (IAP) for the instance and ensure that you have the role of IAP-secured Tunnel User. Use the gcloud command line tool to ssh into the instance. D.Create a bastion host in the network to SSH into the bastion host from your office location. From the bastion host, SSH into the desired instance. Answer: D QUESTION 227 Your company is using Google Cloud. You have two folders under the Organization: Finance and Shopping. The members of the development team are in a Google Group. The development team group has been assigned the Project Owner role on the Organization. You want to prevent the development team from creating resources in projects in the Finance folder. What should you do? A.Assign the development team group the Project Viewer role on the Finance folder, and assign the development team group the Project Owner role on the Shopping folder. B.Assign the development team group only the Project Viewer role on the Finance folder. C.Assign the development team group the Project Owner role on the Shopping folder, and remove the development team group Project Owner role from the Organization. D.Assign the development team group only the Project Owner role on the Shopping folder. Answer: C QUESTION 228 You are developing your microservices application on Google Kubernetes Engine. During testing, you want to validate the behavior of your application in case a specific microservice should suddenly crash. What should you do? A.Add a taint to one of the nodes of the Kubernetes cluster. For the specific microservice, configure a pod anti-affinity label that has the name of the tainted node as a value. B.Use Istio's fault injection on the particular microservice whose faulty behavior you want to simulate. C.Destroy one of the nodes of the Kubernetes cluster to observe the behavior. D.Configure Istio's traffic management features to steer the traffic away from a crashing microservice. Answer: C QUESTION 229 Your company is developing a new application that will allow globally distributed users to upload pictures and share them with other selected users. The application will support millions of concurrent users. You want to allow developers to focus on just building code without having to create and maintain the underlying infrastructure. Which service should you use to deploy the application? A.App Engine B.Cloud Endpoints C.Compute Engine D.Google Kubernetes Engine Answer: A QUESTION 230 Your company provides a recommendation engine for retail customers. You are providing retail customers with an API where they can submit a user ID and the API returns a list of recommendations for that user. You are responsible for the API lifecycle and want to ensure stability for your customers in case the API makes backward-incompatible changes. You want to follow Google-recommended practices. What should you do? A.Create a distribution list of all customers to inform them of an upcoming backward-incompatible change at least one month before replacing the old API with the new API. B.Create an automated process to generate API documentation, and update the public API documentation as part of the CI/CD process when deploying an update to the API. C.Use a versioning strategy for the APIs that increases the version number on every backward-incompatible change. D.Use a versioning strategy for the APIs that adds the suffix "DEPRECATED" to the current API version number on every backward-incompatible change. Use the current version number for the new API. Answer: A QUESTION 231 Your company has developed a monolithic, 3-tier application to allow external users to upload and share files. The solution cannot be easily enhanced and lacks reliability. The development team would like to re-architect the application to adopt microservices and a fully managed service approach, but they need to convince their leadership that the effort is worthwhile. Which advantage(s) should they highlight to leadership? A.The new approach will be significantly less costly, make it easier to manage the underlying infrastructure, and automatically manage the CI/CD pipelines. B.The monolithic solution can be converted to a container with Docker. The generated container can then be deployed into a Kubernetes cluster. C.The new approach will make it easier to decouple infrastructure from application, develop and release new features, manage the underlying infrastructure, manage CI/CD pipelines and perform A/B testing, and scale the solution if necessary. D.The process can be automated with Migrate for Compute Engine. Answer: C QUESTION 232 Your team is developing a web application that will be deployed on Google Kubernetes Engine (GKE). Your CTO expects a successful launch and you need to ensure your application can handle the expected load of tens of thousands of users. You want to test the current deployment to ensure the latency of your application stays below a certain threshold. What should you do? A.Use a load testing tool to simulate the expected number of concurrent users and total requests to your application, and inspect the results. B.Enable autoscaling on the GKE cluster and enable horizontal pod autoscaling on your application deployments. Send curl requests to your application, and validate if the auto scaling works. C.Replicate the application over multiple GKE clusters in every Google Cloud region. Configure a global HTTP(S) load balancer to expose the different clusters over a single global IP address. D.Use Cloud Debugger in the development environment to understand the latency between the different microservices. Answer: B 2021 Latest Braindump2go Professional-Cloud-Architect PDF and VCE Dumps Free Share: https://drive.google.com/drive/folders/1kpEammLORyWlbsrFj1myvn2AVB18xtIR?usp=sharing
Who is the best no win no fee motorbike solicitors?
Road accidents are often frightening and traumatic, even in modern cars which are well equipped with the modern and latest safety devices. Analysis shows that motorbike riders are 63 times more prone to road accidents and get injured or killed in accidents on roads and traffic negligence than car drivers. The impact of these critical accidents and injuries caused can have lifetime consequences and you and your loved ones can suffer for a longer period. It’s seen that the physical and psychological impact of a motorbike/motorcycle accident is often very alarming and serious. At National Accident Supportline we can help you in many ways. We understand your pain and the issues you are going through due to someone else’s negligence. We can advise you of all the claim and compensation procedures on personal I injury claims or motorcycle accident claims or be it a roadside accident claim. Our experts help you with free advice on win no fee basis that can help you with the medical support and financial compensation that is needed to rebuild life back to normal. Sometimes one is not prepared for the claim and has many queries and concerns. We are here to help you in all regards. Tell us about your injury and accident that you have faced and can ask as many questions that satisfy your mind. We are available to reply to you with the best accident help and support advice in town. It’s always advisable that precautions and road safety instructions should be adhered strictly. Wearing of Helmet, gloves, hi-vi vest, over suit is must. Beside the motorcycle should be well maintained and properly checked before driving on roads. What's included in motorcycle accident compensation? We understand your pain and losses. Medical expenditure and more, all is needed to revive back. Our experts connects you with the right solicitor and they can help you with your claim on no win no fee basis. The aim is to help the sufferer retrieve their compensation they deserve. The claim depends upon the severity of wounds and injury type, your recovery time, effects on your personal life and work etc. Motorbike Accident or personal injury claim can be categorized in terms of damages; general or normal damage or pain or suffering or any loss. One might be suffering a long term loss of income due to accident and in need of financial support and other medical expenses. It means your accident has left you into severe damage, loss of income and sometimes unfortunate damage to the body as well. You can discuss all relative queries with our experts Other expenses that you might want to claim due to motorbike accident may include travel, vehicle damage, spare parts need, motorbike repair and replacement vehicle for daily transportation need etc. Our advisory team is always available for support and the answers that you get gives you a clear picture of our working and how well we can support you for claim and compensation services by getting you connected with the experts. How does no win no fee work in case of Motorbike Accident? You only pay when your claim is succeed. Else you don’t pay anything. Our experts can well guide you regarding your motorbike accident claim on no win no fee basis. Since there are no hidden charges and one is worry-free. Are there any time limits for motorcycle accident claims? Firstly accidents are traumatic and leaves one speechless. If you have suffered a motorbike accident that wasn’t your fault and you feared to claim at that very time, you are still eligible to claim. But make sure the time period doesn’t exceed more than three years or so. Within this time frame you are eligible to claim for your damages. Call us 03002122730, NASL your only reliable advisory team in UK, that is helping many to get back to their normal routine by helping them with their claim and compensation support in a non-fault motorbike accident claim. https://pressbooks.com/catalog/enrichmentprograms