DrSiddharth
100+ Views

Tummy Tuck And Liposuction In A Nutshell

Abdominoplasty, more commonly referred to as a tummy tuck, is a surgical procedure that flattens the abdomen by removing excess fat and tightening the skin around the stomach. If sit-ups and abdominal exercises are not yielding results, you should consider abdominoplasty. Skin tightening and fat removal will be performed during this procedure to reduce the size of your tummy and abdomen. Before undergoing this procedure, you should consult with the best plastic surgeon. This surgery may be mild to severe, depending on the size of your abdomen and the desired shape. Bear in mind that this is not a replacement for weight loss.

The ideal candidate for tummy tuck surgery.


As with any other surgery, a tummy tuck is only appropriate for physically fit men and women. Women, in particular, have loose skin around the abdomen area following multiple pregnancies. It is a remarkable procedure for men and women who were obese and remain so. They can combine liposuction and a tummy tuck for optimal results.

What are the differences between a tummy tuck and liposuction?


Liposuction is the way to go if you want to remove a small amount of fat from your hips, arms, or tummy. If too much fat is removed, the skin around the affected area may droop. If you're trying to lose weight, avoid liposuction or abdominoplasty surgery. However, if you have lost a significant amount of weight and are left with excess fat and tissue, an abdominoplasty can be used to remove the excess fat and tissue. Additionally, it is beneficial to tighten the skin around the abdomen. If your BMI is greater than 30 or you anticipate becoming pregnant in the near future, a tummy tuck may be right for you. It is advantageous if you have cardiovascular disease.

Preparation for abdominoplasty.


When you schedule a consultation with a cosmetic surgeon for Tummy tuck surgery, you will discuss your desired outcome. The Surgeon may present you with a number of abdominoplasty options.

Tummy tuck (complete).
As the term implies, the surgeon will make a hip-to-hip incision and remodel it by removing excess fat and tightening the skin. The doctor will insert drainage tubes beneath your skin for a few days during this procedure.

Tummy tuck (partial).
Depending on your situation, the doctor may elect not to relocate the belly button and instead make an incision below the belly button on your abdomen. This procedure may take between two and three hours.

Time for recuperation.


When you regain consciousness, you will notice an incision around your abdomen that has been bandaged. To avoid bacterial infection, this surgical dressing must be changed multiple times during the recovery period. Within a day or two, you will be able to walk with assistance. This will also aid in your healing process. Additionally, the doctor will prescribe pain relievers and antibiotics to alleviate discomfort and prevent infection. Recuperation is expected to take between 2-4 weeks.
Comment
Suggested
Recent
Cards you may also be interested in
Cleanroom Technology Market to Witness Impressive Growth
The increasing demand in developing economies and the growing focus on energy-efficient cleanrooms are expected to offer significant opportunities for market growth in the coming years. However, the high operational cost associated with the cleanrooms is expected to restrain market growth to a certain extent.  The global health crisis triggered by the COVID-19 pandemic has made it imperative that the pharmaceutical industry moves at a rapid pace alongside researchers, regulators, and contract research companies to develop a diagnosis, treatment, and vaccines. Cleanroom technologies and services play an important role in this scenario to ensure that quality, safety, and efficacy are being maintained.  In the current scenario, the healthcare industry is witnessing an unparalleled demand for diagnostic tests, personal protective equipment (PPE), medical ventilators, and other critical medical supplies. Facing the potentiality of a high risk of infection, healthcare professionals (HCPs) are also facing significant challenges in providing specific and effective care (often remotely).  In Hospital systems are becoming overwhelmed with the rapidly increasing number of COVID-19 patients, which is weighing heavily on the pharmaceutical industry. With the increasing demand for certified products, various quality certifications such as ISO checks and National Safety and Quality Health Standards (NSQHS) have been made mandatory for ensuring that the standards for manufacturing processes and products are being upheld. The quality certifications require products to be processed in a cleanroom environment to ensure minimum possible contamination.   Also, the price per square foot is not the same for ISO 6 and ISO 8 cleanrooms. This is because the amount of air supplied is different in both classes of cleanrooms. The air is 100 times cleaner in an ISO 6 cleanroom than in an ISO 8 cleanroom, thereby doubling the air conditioning capacity of the HVAC systems.   For More Information Download PDF Brochure @ https://www.marketsandmarkets.com/pdfdownloadNew.asp?id=263122482 Cleanrooms are mostly designed according to customer requirements based on product specifications and customer-specific design requirements. However, there are no specific guidelines for cleanroom designs for different application areas or product types. This leads to several challenges for cleanroom manufacturers, as they need to follow different designs every time.  The consumables segment accounted for the larger market share in 2019. The high and growing number of pharmaceutical, biotech, and medical device companies facilitating the use of disposable protective clothing has resulted in the increased adoption of the consumables in the cleanroom technologies market. Also, the large number of RD activities in the healthcare industry is resulting in a stable demand for cleanroom consumables among end-users.   The hardwall cleanrooms segment is expected to witness the highest growth during the forecast period. This is mainly due to the higher demand for hardwall cleanrooms, as they are more design-flexible than standard and softwall cleanrooms, quick and easy to install, freestanding for easy portability, and easy to expand or reconfigure.   This is due to its favorable government regulations, increasing healthcare expenditure, and the growing base of pharma companies in the country, all of which are driving adoption of cleanroom solutions in the Asia Pacific. 
Upgrading Your Wardrobe in a Sustainable Way - Tips for Men!
Men are not used to buying clothes more often like women. However, men have a good taste as they want to look good and sharp. To look good, you have to upgrade your wardrobe. You can do an overhaul of your wardrobe but that can be expensive, hence not advisable. You should learn how to do it on a regular basis and in a sustainable way.  Read on to learn some tips for men on how to upgrade your wardrobe to ensure you look good at all times when you go out there in meetings or social places. Scan your wardrobe If you want to upgrade your wardrobe the first you need to do is to identify the clothes your need and those you don’t like or don’t need. Scanning your wardrobe for the essential clothes will help you have a clear picture of what you have and need. You can then make plans on what to add on a regular basis. Those clothes you don’t need or are smaller, you can sell or donate them to the needy communities. Research the latest men clothing Designers are working hard to bring unique styles for men. As such, you can find unique designs of jackets, hoodies, jeans, suits, shirts and more on the market. You need to know your style and research to know the latest styles that can suit you. You can visit different fashion blogs and websites to see the latest and trending cloth designs for men. Also, visit different online shop offering clothes for men and check the most viewed and bought clothes. You may even find a unique outfit that is not trending but ideal for your style. Save for the shopping budget It is always good to have a budget whenever you want to buy clothes or other items. This will prevent you from overspending and buying items you don’t really need. You can set aside some money every month for buying one or two stylish clothes. You can keep the money for up to five months and then go shopping. You will be able to buy classy clothes without straining. When you save towards the budget of buying clothes, you will have enough money to buy the trending clothes you really wanted to have. Buy from trusted shopping sites Today, there are many online stores offering clothes for men. You need to research to know trusted shopping sites that will deliver quality clothes worth the money. You can visit their site to read their reviews to know what past customers are saying about them. Are customers recommending the site? If yes, you can buy from them. On the other hand, if the site has negative reviews from many unsatisfied customers, then you can’t trust them. You can buy from laundra-bargain-store.myshopify.com, among other reputable online shops offering trendy and unique outfits for men. Consider thrift shopping Once in a while, you should consider thrift shopping. Thrift shopping involves buying second hand clothes. Yes, you can find high quality second clothes at very low prices. Most of the clothes are in perfect quality. You just need to check the fabric and size. You may be surprised to find trendy clothes on various shops offering second hand clothes. You just need to time when they are receiving new merchandise. You just to be friends with the staff of your favorite store and they will inform you when you when new merchandise comes in. They can even set aside some clothes for you upon request.  Final Words It is always advisable to upgrade your wardrobe in a sustainable way. You need to have a plan and start saving towards the budget of buying latest and trendy outfits. Also, research to know the trendy styles. Most importantly, buy from reliable and trusted online shops offering a wide range of outfits for men.
What COVID-19 Impacted on Blood Lancet in Healthcare Industry ?
Impact of COVID-19 on Blood Lancet in Healthcare Industry The first case of the COVID-19 pandemic was found in Wuhan, China. This pandemic has influenced the whole planet with its significant impacts on the economy and businesses worldwide. The COVID-19 spread worldwide in unprecedented ways due to its high infectious and contagious nature. As a result, the most outstanding medical challenge in the 21st century is yet to face physicians worldwide. Though the emergence of the virus can be tracked back to Asia, many European countries and the U.S. have been struck massively by the pandemic. The virus has spread across all regions ranging from North America, Europe, Asia-Pacific, Middle East and Africa up to South America. The COVID- 19 has been declared a pandemic by World Health Organization (WHO) due to its increased spread globally. After the pandemic declaration, various countries announced the complete lockdown such as the Russia, Europe and Asian countries, to decrease its spread. Regardless of the pandemic of COVID-19, the demand for blood lancets has increased in healthcare applications. Blood lancets are scalpel-type medical instruments with a double-edged blade used for various diseases for blood diagnosis procedures in hospitals, clinics and the home healthcare arena. According to the situation report of 11th May 2021 by World Health Organization (WHO) stated 157 million cases of coronavirus patients had been reported globally and 3.3 million patients are dead due to the coronavirus. America is leading in cumulative cases with a record of 64 million and 1.5 million death rates. At the same time, nearly 1.45 billion doses of COVID-19 vaccines have been administered globally. The outbreak of COVID-19 has a significant impact on the healthcare and supply chain of various medical devices and kits, including blood lancets. IMPACT ON DEMAND The COVID-19 pandemic has lifted the blood lancet market from its niche pedestal to the mainstream sector. However, even before the pandemic, blood lancets' demand was highly interested in rising chronic diseases such as diabetes, hyperlipidemia and more. For instance, · As per World Health Organization's (WHO) report released on 13th April 2021, the diabetes cases raised from 108 million to 422 million from 1980 to 2014, specifically higher in middle and low-income countries. · In 2019, 1.5 million death rates were directly estimated for diabetes. The rising research and technologies in the medical sector have made various types of blood lancets invade specific applications. These lancets are disposable, which surges its application for pain-free and safe blood diagnosis. This also minimizes the risk of blood transfusion and infection transmissions. The coronavirus pandemic has further increased the demand for blood lancets since COVID-19 can also be diagnosed using a blood test. For instance, · As per the 14th September 2020 published report of the U.K. Government, their coronavirus antibody test kits are delivered home for simple blood sample tests. The limited amount of blood can be drawn using finger-prick disposable blood lancets and provided to labs for 3-7 days results. In the current scenario, coronavirus's rising transmission rate has made homecare and self-diagnosis kits and procedures highly prevailing in the market. Due to its disposable nature, painless and easy usability blood lancets are highly preferred by healthcare professionals in chronic infection diagnosis. Several companies operating in other domains are eager to enter. Some have already entered the landscape of the blood lancet market to increase their revenue by meeting the emergent need of diagnosis kits and blood tests for the virus infection. The demand is further rising in local clinics and small laboratories for blood sugar and lipid testing. Furthermore, the coronavirus lockdown and lack of hospital admissions for other chronic diseases as diabetes have boosted self-monitoring diagnostic procedures among patients. Since blood lancets an ideal device for self-diagnosis, this has increased the market demand to a greater extend. The rising geriatric population and obese individuals, because of unsanitary food habits and lack of physical exercise, have increased chronic illness cases as diabetes on hype. The life-threatening diseases are compelled to be maintained and treated often, which raises the diagnosis requirements globally. Therefore, the affirmative factors boost the demand for blood lancets among patients. PRICE IMPACT The COVID-19 had a devastating impact on the global economy. The several establishments have to remain shut while others scale down the operations or put on hold expansion plans as they tried to survive the unprecedented crisis. However, the demand for blood lancets has been rising because of the increasing prevalence of diabetes patients and their routine self-care diagnostic management. Despite lockdowns and supply disruption crises during this pandemic, the companies manage online sales and delivery of blood lancets without the mandatory requirement of prescriptions. They are also maintaining fair prices owing to the high demand for blood lancets in the market. For instance, · Ever Ready First aid twist cap blood lancets of 500 counts per package costs USD 10.00, which is delivered home with high safety precautions. · Apollo Pharmacy provides home delivery for blood lancets conveniently considering the product under the counter category. The COVID-19 impact has not affected the price of blood lancets at a high level because of advanced online sales and innovative delivery options available with the utmost safety concerns. IMPACT ON SUPPLY CHAIN The COVID-19 has created a significant impact on the supply chain of the blood lancet market. The sudden attack of COVID-19 and its subsequent implications for restrictions on trade and movement of goods has resulted in a shutdown of vast countries globally, resulting in disrupted supply chains due to limited materials and workforce and slow down or stopping of manufacturing. Moreover, several manufacturing companies are retooling priority manufacturing to produce other essential medical supplies and equipment such as ventilators. But since the blood lancets are in high demand by various healthcare sectors, the supply chain is again gaining speed due to an increase in order from the consumers. The government allows the moments of transport vehicles to import and export the raw materials to produce lancets. Additionally, the manufacturers are also taking crucial steps to ensure the availability of raw materials by and also they have to look into the quality of products. Therefore, manufacturers need to take necessary steps about production processes, shifting to other facilities if required, changes in quality assurance, costs and procedures related to screening workforce and offering of care if needed, changes in working hours and others to maintain their supply chain. To minimize supply chain crises, the government has been firmly monitoring the supply chain to assume that the COVID-19 outbreak may adversely impact the supply chain of a medical product, including shortages of blood lancets for various healthcare sectors countries globally or potential disruptions in supply chains. To manage such a crucial situation, many organizations are looking forward to improving and diversifying the supply chain model in all aspects. For instance, · Roche Diabetes Care has taken initiatives for uninterrupted Accu-Chek diabetes test kits and lancet products supply during this health crisis of COVID-19 lockdowns. They are supplying homes with their diabetes self-management lancets and lancing devices with online booking and free delivery without the requirement of prescriptions. · They have also reported that the COVID-19 pandemic has not impacted their supply because of the robust manufacturing facility and evolving solutions. The resulting COVID-19 pandemic has shown the various ways for supply chain management, which may be effective by innovative solutions initiated by the market players. CONCLUSION The impact of the novel COVID-19 virus is expected to leave a long-lasting effect on each healthcare sector. The outbreak of COVID-19 prompted citizens to deal with confusion regarding the virus and its management. The virus poses a risk to human life and has caused economic distress and severe emotional strain. In addition, it produced a ripple effect that gave rise to a new collection of requirements and needs that were not much needed earlier and the essential one being the blood lancets which is highly required in hospitals, clinics, labs and home healthcare setups. It is estimated that the COVID-19 pandemic outbreak was having a positive impact on the growth of the blood lancet market owing to the requirement of self-diagnosis and management by numerous diabetic patients worldwide. Moreover, many international governments, including the U.S, Europe and Asia's healthcare organizations, have supported the supply of blood lancets and other diagnostic kits in the medical and home healthcare arena due to high priority and essential requirements for a crucial health crisis period. Many government bodies and significant market players are closely associated with chronic patients and healthcare professionals for better home care and self-diagnosis, considering the contagious nature of the virus and improvement of future economics with disposable blood lancets.
Plastic Surgery in South Korea
Que tal peeps! This is your chica Jessamine aka @amobigbang here to talk about a serious topic. We all know that looking your best is something very important everywhere, but I'm going to concentrate on Kpop and South Korea. Disclaimer: KpopINT does not promote plastic surgery nor judges those who are considering plastic surgery. There will be a discussion of a controversial topic in this post. Plastic surgery is very popular in South Korean culture and especially in Kpop. Most Kpop stars may get some type of plastic surgery done for personal reasons or career reasons. Many idols do feel the pressure just like regular citizens to look good and even perfect at times to achieve the notion of what is beautiful. When skincare and makeup is not enough they tend to turn to the knife. Even people in other countries come to South Korea to get plastic surgery since South Korea has so many options and awesome plastic surgery surgeons. "Seoul, South Korea, is the plastic surgery capital of the world, with more procedures per capita than any other nation" (2015, Baer). Source None of these images or videos belong to KpopINT. Writer Jessamine aka @amobigbang KpopINT Chairs: @bbyitskatie @Sailynn @KpopBeat KpopINT Fam: @elaynethtrumpet @JohnEvans @LenaBlackRose @LexiMintkgtopty @ParkHwaYoung @parktaemi @tayunnie COMMENT YOUR THOUGHTS BELOW! Before and After Pictures This is a mixture of some before and after pictures of Kpop stars and regular South Korean citizens who had some type of plastic surgery. When people get plastic surgery you will see the double eyelid or chin/jawline procedure done to give the appearance of wider eyes and that "V" jawline. However, "the most common procedure in Korea is blepharoplasty, or double eyelid surgery. According to the International Society of Aesthetic Plastic Surgery, it's the most popular plastic surgery operation in the world, with 1.43 million people getting it done in 2014" (2015, Baer). Double Eyelid Surgery Overview This operation is very controversial. Some say Asians get this procedure to look more Western or to wash out their beautiful Asian features. While some say they get this surgery to look more youthful and awake. "Critics say that the operation makes patients look "less Asian," while proponents say that it's simply a matter of beauty - bigger eyes equals more attractiveness, essentially" (2015, Baer). Oh and don't think women only seek out this procedure. Men do as well. "Hang-Seok Choi, the director of JK Plastic Surgery, a Seoul-based clinic that sees 10,000 patients a year,and the 20% of his patients that are male" (2015, Baer). Many people may pick this procedure since it is very cheap compare to other procedures and less invasive. The prices range "between $1,000 and $3,000" (2015, Baer). Double Eyelid Surgery Advertising Look at how this plastic surgery procedure is advertised. They promote this ad by suggesting it will give you innocent and pure look. Buzzfeed: Plastic Surgery in South Korea I wanted to give you a break from reading lol. This video is what inspired me to make this post. These people send their photos to South Korean plastic surgeons to see how these surgeons would alter their faces. Some people were shocked by their results. This video teaches some plastic surgery Korean vocabulary and speaks about the topic. She speaks about plastic surgery in general in Sout Korea. Eyelid Surgery History Now this is where things get deep. I for one did not know this fact until doing some research on the topic. As said earlier some argue that this surgery is to wash out beautiful Asian features and to replace them with Western features. "The double-eyelid surgery was reportedly introduced to South Korea during the Korean War, which lasted from 1950 to 1953" and for this critics suggest that this surgery is a is a symbol of white America's history of cultural dominance over South Korea" (2015, Baer). This was a hard pill for me to swallow. No one wants to think that at all. It all started with this surgeon "American plastic surgery pioneer Dr. Ralph Millard, who was stationed in Seoul from 1950 to 1953 to do reconstructive surgery for the war wounded" (2015, Baer). Source says that he concentrated or basically spoke ill of the Asian monolid feature. Even in his reports he said some really racist comments and you can read them by clicking on the source link provided on the first block of this post. Women who married American soldiers and women who were prostitutes who wanted to appeal to American GI's and fit into American society demanded this surgery (2015, Baer). Controversial Topic As I said this topic has two sides. One feels that South Koreans are getting these surgeries especially the double eyelid surgery to look Western. While others just say people get it to look more beautiful or not as tired. People say Koreans reasons are not racial for getting these procedures. Seoul-based plastic surgeon Minhwa Na - says: "I would get serious complaints if I performed the procedure and the Korean patient gets a crease like the one of a Caucasian person. What people want is a natural crease that is suited to Asian faces," she said. "The whole idea that undergoing this surgery is an attempt to look white is absurd" (2015, Baer). Cultural critic Moonwon Lee tells says: "That while people don't personally believe they're trying to look white by getting their eyelids done or other plastic surgeries, they're still moving away from Korean-ness. The big eyes, small faces, and perky noses that are hallmarks of beauty in Korea aren't natural to most Koreans" (2015, Baer). When looking into the manner each side in.my opinion is valid. However, it seems like the surgeons support the more modern less racial argument and the cultural experts lean more so towards the racial or "Western wash" idea. My Thoughts... I feel like people will have different reasons to get any kind of surgery or alteration. Some may get it to look more Western and they may have issues with self hate. However, some may get it because they simply like the look and think it is trendy. Just like having straight hair in America. Some people people of color may straighten their hair to look more "White" due to self hate and others may do it because they like the look or style. At the end of the day who are we to judge? If no one is forcing this idea on you and you may be against it there is nothing to really get upset about. I hope people will love themselves and if they get these procedures it is because they like it as a trend not self hate. KpopINT Kbeauty Tag List A: @AlyssaGelet818 B: @babysanchez1253 @Baekyeol27 C D E F G H: @HeichousRegalia @HerosBells I: @IsoldaPazo J: @JamiMilsap @JasminMartinez K L M N O P: @PolarStarr Q R S: @szewwy T U: @unnieARMkeY V:@VKookie47 W X Y Z mis amigos @11erinmims @4dalientae A: @AaliyahNewbell @AdiaJasinskin @aliahwhbmida @AlexAckerman @AlexisRiver @aliciasalinas @AliciaStransky @AlmaRangel @AmandaOwnbey @amberg171997 @AmberRelynn @AmbieB @AnaP @Angelblue @AnnieGoodman @ArielaPicazo @ARMYStarlight @asdfghjkleyr @ashleyemmert @ashrose33 @awkwardjazzy @Airess95 @amandamuska @abiersack666 @AlloBaber @AgentLeo @alywoah B: @Badtz @B1A4BTS5ever @BAbrajan1 @baileykayleen @bambamisbae @bangtanella @Beckah1327 @BessanMerab @Bitterlimelight @blackirishawk @BluBear07 @BriannaN @brirodriguez412 @Britneygraham @BtsIsLife @BulletproofV @Byeoli @BekiKunstman @BAbrajan1 @B1A4BTS5ever @BlueBear07 @bbyitskatie @Baekyeol27 @B1A4BTS5ever @bambamisbae @BetseyBleau @bettytolliver @bambamisbae @bethanub @BreeMassey C: @CallMeMsDragon @CandaceJordan @CarleB @CarlaAcosta @CarlaPacheco @carolinaquito14 @CassidyRoush @CassieWarens @ccebox47 @ChauncySutton13 @ChavaBerry @ChelseaGarcia @chinabarrier16 @Chiqiang @Choijiah @christianliu @CocatolaOtaku @CrystalBlunt @ChristineO84 @CheyenneJesse @chinabarrier16 @ChelseaJay @ChristineO84 D: @Dabaesaplayer @DaisyPhun @DamarisCisneros @dancingdazzler @deefran @Defy24601 @DesireeChucklez @DestinaByrd @DestineeLiu @DreaG1518 @DonnaSearles @Destiny98 @daniimals @DesireeChucklez @Dabaesaplayer @DawanaMason @DarciAragon @DonnaSearles E: @EdithJang @EliseB @ElniWyatt @emilyanpham14 @enthropix @Ercurrent @ESwee @exobts947 @externallyeli @Elena166 @Ercurrent @Exoexo @Emealia F: @fleaisms @FrancescaV95BTS @funnelcakeboo @firstladyofaomg @fallchild @flxvour @firstladyofaomg G: @Gianlica @Gizzy2002 @gummydragon @glostick H: @hobisprincess @HunniNutFeelios @HyunnieKim @ILikeHisFace123 @HayleyYates @Helixx @hayoungforever I: @InnocentiaKishi @IsoldaPazo J: @JadeNarine @JadeOwens @jaidemae @Jasminep96 @JasmineWilliams @JasminMartinez @JasminPerez @JayRaider @jazgaara33 @JelliBelli111 @jessicacheung97 @JessicaFigueroa @jimin21abs @jiminsabs @JinsPrincess86 @Jiyongixoxo @justcallmekyki @JazzyJazJaz @JohnHomampha @JustinaNguyen @JaclynGuajardo @JohnEvans @jojojordy2324 @jordanhamilton K: @KAddict @kanatm @kandle779 @KarenGuerra93 @KarenHer @KatMejia @KatelynSummerso @KarlythePanda66 @KaylaStokes @KellyOConnor @Kelsiumm @Keniaaxox @KeylaMoreno @kgutierrez @KhouYang @Kieuseru @KimHeecha @kmeier230 @kpopbunny9 @kpopandkimchi @KPOPER1 @KPopFandom @KpopGaby @Kpoplover20 @Kpossible4250 @krin @KrystaDaricek @KwonOfAKind @Kyokeo @KpopQueenaBee @KDramaKPop1015 @Kyokeo @kolai4 @kimnam94 @KokoroNoTakara L: @lashonda0917 @LaurenStrayhorn @leelee12 @LenaBlackRose @lennykpop @LexTay327 @Lexxcisco @Ligaya @LilySilver @liannet27 @lisbt92 @Lizzeh @loftonc16 @LlamaBaozi577 @LolImbetter09 @luna1171 @LisetteZapata @LauraEspinoza M: @MaatiCasanova @Maddie27 @maddiedo @MandyNoona @MariahMaes @MaricelvaRomero @Meeshell @megancurrent9 @MelinaHernandez @MelissaGarza @merryjayne13 @MichelleIbarra @Mightmuffin @MinDeji @minimonkey07 @Minnieluvs @MirandaStephens @mirandazamira @MischiefK1ng @MistressSiren @moonchild03 @MorganElisabeth @MsLoyalHeart @mszmarclyne93 @musicmofo @myylifeisnow @MyriamMadla98 @MZDawson31508 @MichelleRosa @MadAndrea @MyaIsNotSexy @Maddie27 @Marilovexoxo @Mercii @milcalopez963 N: @NaughTae @NelyLovo @nenegrint14 @nerdy3000 @ninjamidori O: @obiterdictum @Onenonlybovie @OnLarrysCloud P: @P1B2Bear @pharmgirlerin @Pickles440 @pkhyeri @PrincessUnicorn @poojas @Purplicious @PrettieeEmm @ParkHwaYoung @parktaemi @PandaSoapy @pandaqueenbee Q: @QueenLele R: @raenel @rapmonsterous20 @resavalencia @reyestiny93 @Rhia @rosajlm2 @roseeoh @Roxy1903 @Rina143 @RihannaTiaMay @RainaC3 @reyestiny93 @ravenrave95 S: @SamanthaRae19 @sarahdarwish @SarahVanDorn @sarangseoltang @SarangRavi @saraortiz2002 @Shadyllamas @shelbiisonfire @ShimJooKyung @ShinoYuki @SierraBecerra @SilentPianist @Simba14 @SkyRollins @solodaywithB1A4 @squishyseokjin @staceyholley @Stefany17 @StephaniePoore @sugakookie @sugasweetness @SunnaWalo @SunshineChang @SusiBosshammer @swarrier16 @SimplyAwkward @StefaniTre @senia @stevieq @shantalcamara @staceyholley @SugalessJams @solodaywithB1A4 @SaiT @StephanieDuong @SarahVanDorn @ShimJooKyung @SamanthaRae19 @Sinon1488 @SarahHm11 @shisuschrist @ScarletMermaid @SugaOnTop @SugaMint @sherrysahar T: @Taehyungie @TaehyungKey @Taisa @TeaeraHarrell @terenailyn @thatoneoutcast @Ticasensei @tiffany1922 @TiffanyBibian @tinaechle @TLeahEdwards @ToppDogg @torchix @TracyLynnn @TaehyungV @terenailyn @Taehyungkey @taetaebaozi @twistedPuppy @Tamaki1618 @Tigerlily84 @tayunnie @twistedPuppy @TessStevens U: @UnnieCakesAli V: @Vay754 @VeronicaArtino @VioletaDelRio @ViStorm @viviano6 @Vixxstarlight1 @VKookie47 @vlargos @vyntnguyen24 @VIPforever123 @Vkookie47 @VixenViVi @VIPFreak2NE1 X: @XergaB20 @XionHeart @Xoxojessica12 @xsandos17 @xroyalreisx Y: @yaya12 @yewookyu @YeniGonzalez
Get Natural Looking Results with Breast Augmentation In New York City
Breast shape, proportion and size play an important role in every woman’s femininity beauty and confidence. But not all women are happy about how their breasts look. Common concerns include loss of volume, severe asymmetry, underdevelopment, and sagginess. All of these issues can be now resolved with breast augmentation in New York City. This is popular plastic surgery procedure provides women with rounder and fuller breasts that match their distinct body type. Importantly, a skilled plastic surgeon can perform the procedure to provide attractive, natural-looking results. Breast Augmentation with implants Breast augmentation offers great deal of flexibility in terms of versatile approaches, techniques and results. Implants enhance the fullness and size of the breasts. There are various types of breast implants like saline implants, silicone gel implants, gummy bear implants and Ideal implants. Implants come in different sizes and shapes like tear drop and round with textured and smooth surfaces. The surgeon will recommend the right size and shape depending on patient goals and anatomical considerations. Breast implant surgery is performed under general anesthesia. The incisions to insert the implants may be placed on lower edge of the areola, the crease line beneath the breast, or in the armpit. The incision option will be selected based on an evaluation of the patient’s anatomy. Breast implant surgery can take around 1-2 hours. Tightness in the chest and mild discomfort and pain are common after the procedure. An experienced surgeon will take care to ensure minimal scarring and provide a natural looking appearance. Skilled surgeons may also provide composite breast augmentation which is also known as lipoimplant augmentation. This innovative procedure combines breast implants with fat transfer to provide an overall softer and more natural looking results. Breast Implants – What You Should Know If you are considering breast implant surgery, there are certain things you need to understand, including what you need to do before and after the procedure. · Breast implants may not last a lifetime and will have to be replaced if your body shape changes with age. · Breast implants do not affect breast feeding. · The FDA suggests MRI surveillance of silicone implants to help detect implant ruptures. If your silicone implant ruptures, the FDA recommends having it removed with or without replacement. With an IDEAL implant, you can detect a rupture by just looking in the mirror and an MRI is not needed. · You will be advised to stop smoking, drinking alcohol four to six weeks before as well as after the surgery. Your surgeon will also recommend that you stop taking medicines like blood thinners a few weeks before the surgery. · After surgery, you will need someone to drive you back home and stay with you for a night as you may feel dizzy and nauseous due to the anesthesia. · Make sure you get enough sleep and rest and drink plenty of water to stay hydrated after the surgery. · To avoid putting pressure on the implant, sleep on your back or sides and not on your stomach till healing is complete. · Avoid any strenuous physical activity and exercise for a few weeks. Breast augmentation in New York City can help you achieve beautiful, natural looking results and have a positive impact on your confidence, self-esteem, and body image. In leading practices, plastic surgeons use 3D simulation technology like Axis Three, Vectra 3D technology or Oculus Rift 3 dimensional imaging glasses to help patients visualize their results and take an informed decision. https://www.bodysculpt.com/breast/augmentation-surgery/
COVID-19 Impact on Healthcare Robots in the Healthcare Industry
COVID-19 Impact on Healthcare Robots in the Healthcare Industry As the deaths from the COVID-19 pandemic start to increase, the World Health Organization (WHO) has urged citizens to maintain specific social distances. In an attempt to avoid the spread of COVID-19 at the population level, medical robots or healthcare robots are gradually involved in the roles of sanitizing patients' quarters, distributing medications, and supplying meals to ill people. Supplying supplies to households and delivering effective services to injured patients remained a major obstacle, and this is where healthcare robotics is creating a space for them. The new pandemic is growing in demand for healthcare robots as they play a crucial role in the process of drug distribution, patient evaluation, and medical workers' infection control. COVID-19 Market Effect The 2002-2004 SARS pandemic has indelibly altered the business climate for healthcare robots. Nearly 8,000 people were affected and 700 were killed. In addition, MERS affected 200 and killed about 40 of them. They were all limited to different territories. COVID-19, on the other hand, as a pandemic, has had a larger influence on the global economy. The SARS and MERS outbreaks contributed to a new era of creativity with the advent of disinfection robots that produce UVD light to combat against infectious viruses and bacteria on hospital surfaces. If COVID-19 continued to grow globally, UVD robots makers would expand significantly, and if the pandemic was bought under control, healthcare robots would be developed exponentially to decrease the risk of infective infection in hospitals. The healthcare robots market was expected to hit with a significant growth rate in 2020-2021. Owing to production reductions and supply distresses, the healthcare robotics demand was minimally affected in 2020. That would contribute to a decline of BPS 180. But the sector is now starting to see blue sky as the main development region such as China is beating the recession and moving up. Succeeding in the Wake of the Emergency Healthcare robots can play a critical role in the current pandemic by reducing human involvement and shielding health staff from infection. This will involve measuring patients' temperatures, disinfecting equipment, measuring specimen swabs and delivering much-needed psychological assistance to patients in isolation. Researchers are now beginning to illustrate the cyclical aspect of technology right after the recession. The COVID-19 contraction would accelerate labor-replacement automation as business sales see a fall. This might have arrived during the 'cultural shock' as automation eliminates low-skilled jobs. The prospects for healthcare robotics exist in the introduction of smart navigation and the detection of high-risk and highly contaminated environments. Wireless networking systems in healthcare can include drones, telemedicine, and decontamination with AIdriven capabilities. Healthcare robotics should see early acceptance in regions first hit by the infection, offering them an advantage. The companies in China are now doubling their revenue production from the previous years. By the time the pandemic is done, robotics should be distributed through a variety of facilities and programs. The manufacturing will experience reshoring, with decreased reliance on countries such as China, and one way to do so would be by robots that would support the robotics industry. Disinfection Robots UVD Robots, a Danish corporation located in the University of Odense and Blue Ocean Robotics, is a leading manufacturer of disinfectant robots for China in the fight against the spread of the virus. The firm signed a deal with Sunay Healthcare Supplier in February and has since delivered dozens of its self-driving robots to clean hospitals and other places with ultraviolet light. The firm claimed that this reduces the transmission of coronaviruses without exposing medical workers to the possibility of infection. Since then, the firm has marketed robots to locations in more than 50 organizations, extending its services outside China to places in Europe and the United States that are facing epidemic issues. UVD Robots frequently accepts inquiries from outside the hospital and medical institutions, including prison, offices, production floors, department shops, malls, airports, hotels, and restaurants. Dimer, located in Los Angeles, provides its GermFalcon UV-C robotics equipped to clean aircraft and its UVHammer robotic systems for hospitals and complex settings. In mid-January, the organization provided its services to the first three major U.S. airports where Chinese arrivals took place. Xenex confirmed that its LightStriken germ zapping robots became the first hotel in the U.S. to sanitize or clean guest rooms and communal areas at the Westin Houston Medical Center. The technique developed by two epidemiologists in Houston will easily kill pathogens, bacteria and fungi by utilizing strong pulsed xenon ultraviolet radiation. The MTR Company, which runs the Hong Kong subway, has confirmed that it is partnering with Avalon Biomedical (Management) Limited to build the VHP Robot, which stands for the vaporized hydrogen peroxide system. The robot conducts deep cleaning and decontamination in train compartments and stations to secure passengers and workers. More than 30 disinfection robots developed and manufactured by TMiRob, a company in Shanghai, have joined major hospitals in Wuhan, the hub of the novel coronavirus outbreak, to counter the epidemic. The white robot deployed by the firm has a hydrogen peroxide sprayer on its "front" and nine ultraviolet lamps in its "belly" and can conduct various types of disinfection in areas where humans and machines coexist, navigation hardware allows the system to clear hazards independently. Beijing-based robotics firm CloudMinds sent 14 robots to Wuhan, China, to assist with medical treatment in the wake of the coronavirus pandemic. Robots, some of which are more humanoid than others, can scrub and disinfect, distribute medications to patients and check the temperature of patients. CloudMinds contributed robotics to a number of medical institutions in China, including the Wuhan Wuchang Smart Field Clinic, which was converted from the Hong Shan Sports Centre. An Israeli-made AI robotic assistant is being used in hundreds of clinics, community centres, nursing homes and industrial buildings in Asia to eliminate human-to-human interaction as millions of people take precautions for a current coronavirus epidemic worldwide. Israeli company Robotemi, a creator of the Temi robot assistant, claims the device has already been sold to hundreds of locations throughout South East Asia, including China, Japan, South Korea, and Hong Kong. Healthcare Assistance Twelve sets of robots were provided into an intelligent hospital in Wuhan, China by CloudMinds, a supplier to A3, to support the health workers overstressed and threatened. The robots carried out many important tasks including flagging patients who had a temperature, pulse rate, and blood oxygen rates and medicine at the entrance to the field hospital. Such robots have also cleaned and disinfected the hospital areas and performed fitness exercises for patients with the disease. In addition, Chinese researchers modeled the arm of a robot on wheels that can ultrasound, swab in the mouth, and hear the noises produced by a patient's organ normally with a stethoscope. The robot will conduct these activities with cameras in the same space without having to provide medical staff. Professor Zheng Gangtie from the University of Tsinghua developed the device. Unmanned Vehicles Unmanned vehicles and other autonomous robots are deployed in China's virus-affected regions. For instance, Beijing JD Logistics has sent two unmanned L4 class vehicles to Wuhan, and engineers have driven the vehicles remotely through the cloud. Another firm, Idriverplus, has donated an unmanned transportation vehicle to Shanghai and Beijing hospitals. Amazon revealed that it will recruit 100,000 workers to deliver products in vacant warehouses to purchase during the epidemic. The area of e-commerce is now growing with the usage of robots to fill orders and this increase is projected to accelerate as more customers shop digitally, while they remain home more. Teleworking Robots The use of video and audio conference software as companies including Zoom, Microsoft (Skype) and others providing interactive meetings services has expanded with millions of citizens still operating at home because of the state and nation lockdowns. However, businesses of telepresence robotics do have greater interest of their apps, but not for the same purposes. As a consequence of the latest epidemic of coronaviruses, Ava Robotics is building handheld telepresence robots for many years. According to the CEO and cofounder of the firm, the increasing number of hospitals and nursing homes are interested in the robots, which enable the family to talk to patient and older residents on video as a consequence of the policy of 'no visits' and lock-outs in these places. Owing to the need to be simple to use on one end of the line-an aged or ill user in this situation, Ava robots are distinct from the machine enabled video-conferencing device used on a phone or a computer. The company works to make it simple for robotics setup people to click on a connection and talk to the telepresence robot instantaneously. In parallel to the robot's operation, hospitals have utilized Ava robotics, primarily for triaging through the coronavirus. For starters, the robot is configured to remotely test patients with Ava robotics after the initial appointment in one of Boston's largest hospitals. It's also the machines that patients use to reach and depart a position often-rather than people, the system will do it to save the medical equipment because a person has to wear a face mask, shoes and gloves every time instead of human operation. Initially, Czartoski, a practicing neurologist, was utilizing telemedicine in the care of stroke survivors, one of the strongest early lead for telemedicine. According to him, "If I encounter anyone with stroke signs, I will test them with a camera relatively easily to inform them if there is left side fatigue to speech problems, then I will look at the CT scan and the results then make a recommendation for the ER specialist." Virtual visits are growing in the providence. The non-profit health care network conducted nearly 100,000 virtual appointments in 2019. In 2012, the providence carried out a few hundred telemedical visits a year and was rising at a fast pace — from 12,000 in 2016 to 41,000 in 2018 to more than 100,000 last year. That figure does not explicitly reflect the usage of telemedicine in the ICU. Pharmaceutical Assistance Pharmaceutical firms tend to work on viral vaccinations or therapies and automation businesses have developed electronic tools to further simplify manual and replicate processes over the years. The robotics firms also provide options for businesses seeking to combat the COVID-19 virus. The two new modular, ready-for-assay workstations, focused on the Microlab STARlet liquid handling system, were announced recently by Hamilton Group. The latest technologies will help render the SARS-CoV-2 coronavirus that triggers the current COVID-19 quick and highly effective diagnostics, and research-based testing, said the firm. The MagEx STARlet allows the extraction of biological samples from high-performance RNA-based magnetic beads, the PCR Prep STARlet workstation is pre-configured and eligible for sample deployment utilizing recent protocols from the centers. Furthermore, the robotics designed by businesses is actually being employed in the war against coronavirus. ABB robots can be seen in this ABC news story to help a medical laboratory with the development of COVID-19 research kits. Healthcare Robots Market Synopsis The new pandemic will be targeted by health-care device vendors. They will be aligned on developing, unregulated markets with tech firms, stressing the value for national emergencies of healthcare robots. Many industries such as Enterprise Resource Planning (ERP) for higher profit margins are often impacted, in combination with robotics. Medical personnel's are predicted to become a potential phenomenon in patient events, raising the incidence of disease infections. According to the International Federation of Robotics (IFR), the shipments of medical robots already have increased by 50% in 2018. The outcome of coronavirus, however, illustrates some of the essential situations in which robotic systems may be disinfected, tracked, controlled and supplied. The World Robotics study shows that Europe is the most robot-densely inhabited region in the world with an estimated size of 114 units per 10,000 employees. In Edinberg in the United Kingdom, robotic engineers are operating on what they believe is the first safety device to speak to more than one human concurrently. The initiative was planned to support disabled citizens. Scientists say that the discovery will aim to counter potential waves of diseases such as the pandemic. Throughout the United States, the COVID-19 patients are housed at the Providence Community Medical Center throughout Washington in remote locations with two rooms. A robot, which has a microphone, a stethoscope and a camera, is being used by physicians. It helps doctors to interact individually with patients without touching. Disinfection UVD robots in China has been widely searched after as a consequence of the outbreak. The robot built by Denmark's blue ocean robot is ordered by a significant number of hospitals in the world. In the epidemic epicenter of the Wuhan outbreak, these robots played an important part. As time passes, robotics plays a significant role in fighting diseases such as COVID-19, similar to other technologies. Robot technologies will play a significant role not just in aiding patients but also in maintaining the wellbeing of physicians and healthcare staff in the case of an epidemic. The crises are changing views on what is feasible in terms of innovation and strategic intervention on the part of both private and policy players. When the COVID-19 pandemic is finished, the variety of technologies and industries are built into robotics. The virus was a successful chance for businesses to show robotics for public applications. One of the most common is the installation of mobile unmanned ultraviolet (UV) light platforms to disinfect facilities. Danish business UVD Robotics is taking advantage of this potential and is increasing the application of robotics to clean hospitals. The U.S. based Germ Falcon provides identical UV disinfection approaches for airplanes, while Chinese TMiRob deploys UV disinfection robots in Wuhan. "Automation of disinfection is a vital aspect of preserving health and safety and maybe one of the big bright points in reaction to COVID-19. In the near term, the policymakers would need to improve their defense apparatuses as well as the effectiveness of their medical services in order to implement quarantine mandates. The robots should be crucial to doing this by disinfection, tracking and surveillance. Throughout the long run, COVID-19 is contributing to a major reassessment of the worldwide supply chain in production. America's reliance on Chinese imports of essential machinery and drugs is becoming a controversial problem, and policy officials are now seeing the crisis as an incentive to revitalize the drive to re-launch more manufacturing resources on the domestic sector. Whether that turns into more drastic intervention by policymakers to diversify or re-land the output of key products, it may very well bode for the robotics sector, because these reforms will entail substantial rises in CAPEX and efficiency gains in developing countries. Instead of the infectivity of COVID-19, it is better if human-to-human interaction is minimal. Since robots are free for contamination, software companies such as JD.com and others have invested to get more robots marching down the main street to provide medical equipment in healthcare settings. The robots often end up becoming critical when providing vital items to individuals who order and purchase digitally and are lonely at home. Meituan Dianping, a logistics platform, is growing the 'contactless shipping' choices by automated vehicles and robots. Shenzhen-based company Pudu Technology aimed to reduce cross-infection by introducing a robotic home distribution of medications and food. COVID-19 poses a nightmare for robotic manufacturers designing applications for emerging economies in the automotive, construction and supply chain industries. But for vendors targeting markets which that are closer to government, such as safety, education, and protection, this is a great opportunity. Whitton advises that 'the market players create tailored solutions for non-manufacturing use cases or aim to create integrated solutions to allow scale-up in the manufacture of medical supplies. To mobile robotics manufacturers and tech firms pursuing more global markets, this is a perfect chance to demonstrate the role of healthcare robotics in solving national crises as well as alleviating economic shock.
6 Common Mistakes You’re Probably Making While Conditioning Your Hair
Hair is probably the most important feature of our body. It frames the face and lets us achieve different looks by chopping it or styling it in many ways. Often, it happens that we have a hard time managing our hair, and it ends up looking dull and lifeless. If you have long and soft hair goals, and still seem to be unable to reach them, then you might be doing something that's not right. While shampooing your hair is important, following it with a conditioner is equally essential. Avoiding conditioner, or not using it properly, might be a factor in not having hair that looks healthy, shiny, and effortlessly beautiful. Here are the 6 common mistakes you're probably making while conditioning your hair: 1. Not Using A Conditioner. It is the most common mistake that you might be making when taking care of your hair. The shampoo is not enough for your hair, as it can make your hair rough and eventually prone to damage. A shampoo opens up the hair cuticles that must be allowed to close by using a hair conditioner afterward. A conditioner is responsible for locking in the moisture in your hair and making it tangle-free. Thus, it works in protecting and hydrating your hair. So next time, make sure you don't skip on your conditioner. 2. Don't Use Too Much Of It. It is recommended that you should use just a coin-sized amount of conditioner on your hair, depending on the thickness, of course. Using large amounts of conditioner at a time could make your hair look greasy and flat. It can also make your hair fragile over time, due to the product buildup. 3. Choose A Conditioner Suitable For Your Hair Type. Knowing your hair type and its requirements is the key to healthy hair. A conditioner usually moisturizes the hair and protects it's from dirt and pollution. So, choosing the right one for your hair becomes a prominent decision. If you have dry or curly hair, then you need a conditioner that is thick and deeply nourishing for your hair. It should also be your priority to use chemical-free products when it comes to your hair care. Clovia Botaniqa Anti-Hair Fall Conditioner has all the goodness of many natural ingredients, like jojoba oil, vitamin E, keratin, argan oil, and more. It helps you in keeping your hair frizz-free and strengthen it. 4. Match It To The Brand Of Your Shampoo. Don't even consider using a conditioner that is different from your shampoo brand. It may happen that you don't see effective results on your hair, even after using a conditioner. It is because the conditioner may not be as suitable for your hair as your shampoo is. A pair of shampoo and conditioner from the same brand, and the same range, can provide you impressive results, as their functions will complement each other's work. 5. Avoid Your Scalp While Applying It. Hair conditioners differ vastly from shampoos. They are meant for your hair and should not be used on the scalp. The texture of the conditioner is very creamy and thick, which can clog your hair follicles. Eventually, it will cause hair to fall and cause a greasy scalp. Make sure to apply conditioner only on the lengths and ends of your hair, avoiding the scalp. Rinse it thoroughly after a few minutes, and you'll have silky smooth hair. 6. Not Leaving It On For Long Enough. Yeah, that's a thing. It is necessary to massage the conditioner in your hair lengths so that it emulsifies and closes your hair cuticles. Just dabbing it on your hair and rinsing immediately after, is not going to give you good results. You have to leave it on for a few minutes after massaging it well, and then wash it off. A good hair day fills you up with so much confidence in yourself. You can do any hairstyle when your hair is healthy and bouncy. For this to happen, pay close attention to the mistakes that you could have been making unknowingly, while using a conditioner. Make sure to be very caring about hair as they need that gentle maintenance, and you will surely achieve your hair goals.
Breast Reduction Surgery - Health Benefits And How To Know If You Need One
Although many women seek breast augmentation to increase their size by a cup size or two, just as many women seek breast reduction to reduce their size by a size or two. Besides this, breast reduction surgery has a variety of health benefits. Although many women are aware that breast reduction surgery is an option, they are unaware that breast reduction may be able to help them with some of their health problems. What Is The Problem? Many women who have large breasts endure pain in many parts of their bodies. The proportions of the body are frequently distorted by large breasts. This imbalance can put tension on various muscles and joints. With age, this becomes more difficult. The weight of the breasts pulls the shoulders forward naturally. Nerve fibres may be squeezed as a result of this. Women may have nagging, continuous discomfort as a result of the compression of nerves. What Are the Benefits of Breast Reduction? Breast reduction surgery can reduce the size and contour of the breasts, reducing the tension on the back muscles and spinal column. Many women see a reduction in back and even hip pain once they lose weight. Many women report a boost in self-confidence in addition to the physical benefits of breast reduction surgery. Many people believe that only small-breasted women have body concerns, but this is not true. Women with abnormally large breasts also have insecurities about their bodies. Having the physique of your dreams might help you gain the self-confidence you've always desired. Following their surgery, many ladies discover that they can finally exercise the way they've always wanted to. Because the weight of the breasts makes it difficult to move in certain directions, a woman's ability to work out as she likes may be hampered. How Do I Know Whether I Need a Breast Reduction? Consider breast reduction surgery if your breasts are large and they make you feel insecure. You may also have physical symptoms such as shoulder pain caused by your bra straps, which is a result of the bra supporting too much weight. Back and neck ache are additional symptoms that your body is trying to sustain your breasts' weight. Numbness in the hands and fingers, as well as headaches and, in severe cases, shortness of breath, have been reported by some women. Is Breast Reduction Surgery a Good Option for Me? Most women who are in good health are good candidates for breast reduction. There are a few things that could prevent you from having this surgery done. Schedule a consultation your plastic surgeon to see whether you're a good fit. Obtain started today by booking your consultation if you're ready to get the physique you've always wanted, relieve discomfort, and enhance your health.
Cell Counting Market - Trends, Growth and Future Analysis
The market growth is largely driven by factors such as growing funding for cell-based research, rising incidence of chronic and infectious diseases, growing biotechnology and biopharmaceutical industries, the development of enhanced solutions and improved image analysis, and the growing use of high-throughput flow cytometry and automated hematology analyzers. On the other hand, the high cost of cell analysis is expected to hinder market growth to a certain extent.  The medical application segment will grow at the highest CAGR in the cell counting market. Increasing government initiatives in stem cell research and the wide usage of cell counting in research are the major factors driving the growth of the research applications segment during the forecast period.  The high growth of this segment can primarily be attributed to the growing regulatory approvals for cell culture-based vaccines, increasing pharmaceutical RD expenditure, and commercial expansion of various pharmaceutical companies.  For More Information Download PDF Brochure @ https://www.marketsandmarkets.com/pdfdownloadNew.asp?id=157450728 The large growth of this segment can be attributed to factors such as the growing number of proteomics, genomics, and stem cell research activities; increasing research funding; increasing investments by pharmaceutical and biotechnology companies; and the growing trend of research infrastructure modernization.  The major companies in the cell counting market include Danaher Corporation (US), Thermo Fisher Scientific Inc. (US), Becton, Dickinson and Company (US), Merck KGaA (Germany), and Bio-Rad Laboratories (US). 
Lasers Vs Chemical Peels - What's Best For Your Skin?
Scarring from acne? Fine lines and wrinkles? Pigmentation and sun spots? Is any of this ringing a bell? They do happen, regrettably, and when they do, we panic. We've looked everywhere, from skincare products that claim to remove age spots to lengthy Google searches, expecting to find the 'magic' treatment that can eradicate the skin's textural imperfections and beyond. Fortunately, there are alternatives. Chemical peels and laser treatments, two skin resurfacing techniques that remove damaged skin to encourage skin regeneration, are used. What is the final outcome? Smoother and more rejuvenated skin. Combating skin problems has never been easier, but if you're new to the world of skin resurfacing, it might be intimidating. What Is the Difference Between Chemical Peels and Laser Treatments? Skin resurfacing techniques such as chemical peels and laser treatments remove old skin to promote the formation of new skin. Both procedures are frequently used to treat acne scars and hyperpigmentation, fine lines and wrinkles, and sun exposure issues such as pigmentation spots. Chemical peels and laser treatments are distinguished by the procedure itself. The first, as the name implies, employs chemical treatments to remove damaged skin, whilst the second employs lasers. Chemical peels use different amounts of acid solutions to treat the skin's outer layer. There are three types of peels: superficial, medium, and deep. Superficial chemical peels (for example, VI Peel and lactic acid peels) are delicate and exfoliate the skin lightly with weak acids. Medium chemical peels (for example, glycolic acid peels and TCA peels) are more invasive and penetrate the middle and outer layers of the skin. Deep chemical peels (e.g., phenol acid peels) are the most potent, employing strong acids to penetrate as well as remove damaged skin cells. Laser resurfacing treatments use light beams to penetrate the skin, eliminating one column at a time. Although laser removal is more exact, it is often more expensive than chemical peels. There are two types of lasers: ablative and non-ablative. Ablative lasers (such as CO2 and erbium) offer the best effects by vaporizing the skin. Non-ablative lasers (for example, Fraxel) are less intrusive to the skin because they heat it rather than destroying it. Because non-ablative lasers are less strong than ablative lasers, numerous sessions may be required to achieve the optimum results. While chemical peels and laser treatments are distinct in their advantages and the concerns they address, there is some overlap in the issues they address. A strong TCA (trichloroacetic acid) chemical peel, for example, can give resurfacing comparable to that of a resurfacing laser, or both peels and lasers can be utilized to treat acne and acne scars. In terms of skin tone, the two surgeries are also dissimilar. Chemical peels assist those with darker skin tones the most because they are an excellent pigmentation treatment. People with dark skin tones are more prone to hyperpigmentation concerns such as post-inflammatory hyperpigmentation due to an overabundance of melanin in their skin (PIH). Acid solutions are used in chemical peels to encourage collagen formation, and antioxidants are used to further penetrate and treat pigmentation in darker skin. What Are the Most Common Chemical Peel Types? Vi Peel The VI Peel is a painless, mild peel that is appropriate for all skin types and tones. It is made up of trichloroacetic acid, Retin-A, salicylic acid, phenol, and vitamin C and is widely used to treat hyperpigmentation and repair UV damage. Lactic peel A lactic peel is made from milk and is ideal for dry or sensitive skin. It balances the pH of the skin and exfoliates gently by dissolving dead skin cells. Glycolic peel Glycolic acid, which is used in glycolic peels, stimulates the synthesis of new collagen and elastin by targeting the skin's outer layer. It is frequently used to treat acne, acne scars, and to tighten pores. TCA peel A TCA peel, which is more harsh than a glycolic peel, contains trichloroacetic acid. It is commonly used to lighten skin pigmentation and smooth wrinkles. Phenol peel To address severe wrinkles and discolouration, a phenol peel penetrates the skin thoroughly. When compared to gentler peels, it typically necessitates a lengthy recovery period and may be unpleasant. What Are the Most Frequently Used Laser Treatments? Fraxel Laser Treatment The Fraxel Laser Treatment uses FDA-approved fractional laser technology to revitalize skin. This laser is best effective on acne scars and tiny wrinkles that are mild to moderate in severity. CO2 Laser Treatment The CO2 Laser Treatment uses pixelated carbon dioxide lasers to treat more severe skin issues like deep wrinkles and acne scars. In general, this laser is unsuccessful for treating skin redness. Erbium Laser The Erbium laser is a less invasive and gentler laser treatment than the CO2 laser. The laser increases collagen formation by penetrating the epidermis (the outer skin layer). It's commonly used to remove wrinkles, fine lines, and age spots. Which Of These Is the Best Skin Care Treatment? It all boils down to your skin type and concerns, in a nutshell. It can be difficult to determine the best course of action, therefore it is always advisable to visit with a dermatologist to discuss your concerns and treatment choices. Not all chemical peels and laser procedures are suited for people with darker skin tones. Are you unsure about your situation? When in doubt, always consult a dermatologist. THE MOST EFFECTIVE ACNE SCAR TREATMENT A chemical peel used to treat hyperpigmentation. Textural changes, such as atrophic or indented scars, respond better to laser skin treatments. A TCA chemical peel, on the other hand, can help with acne scars. Combination methods, which include laser, peels, subcision, and/or dermal fillers, are widely used. WHAT SHOULD I EXPECT IF THIS IS MY FIRST CHEMICAL PEEL/LASER TREATMENT? With chemical peels, expect some redness and peeling following, depending on the type of peel. Not every peel results in apparent peeling. Post-laser skin side effects may include redness, peeling, swelling, and bruising, depending on the laser used. If you use topical treatments, you should discontinue them a few days before the procedure. You may be advised to stop using retinoids, hydroxy acids, benzoyl peroxide, or other harsh, drying, and potentially irritating substances depending on the peel and laser. As a preventative step, patients with a history of cold sores may be given antiviral drugs. WILL A CHEMICAL PEEL OR A LASER TREATMENT BE APPROPRIATE FOR MY SKIN? If you have any of the following conditions, you should avoid chemical peels and laser treatments: - Active infections in the treatment regions - Will be exposed to sunlight after treatment - Have a history of keloids or hypertrophic scars. - A lack of enough post-treatment recuperation time. - Have a darker skin tone (this applies to certain types of chemical peels and laser resurfacing treatments). Whether you choose a chemical peel or a laser treatment, there is a resurfacing skin option for you!
[October-2021]Braindump2go New SAA-C02 PDF and VCE Dumps Free Share(Q724-Q745)
QUESTION 724 A company is building a new furniture inventory application. The company has deployed the application on a fleet of Amazon EC2 instances across multiple Availability Zones. The EC2 instances run behind an Application Load Balancer (ALB) in their VPC. A solutions architect has observed that incoming traffic seems to favor one EC2 instance resulting in latency for some requests. What should the solutions architect do to resolve this issue? A.Disable session affinity (sticky sessions) on the ALB B.Replace the ALB with a Network Load Balancer C.increase the number of EC2 instances in each Availability Zone D.Adjust the frequency of the health checks on the ALB's target group Answer: B QUESTION 725 A startup company is using me AWS Cloud to develop a traffic control monitoring system for a large city. The system must be highly available and must provide near-real-time results for residents and city officials even during peak events. Gigabytes of data will come in daily from loT devices that run at intersections and freeway ramps across the city. The system must process the data sequentially to provide the correct timeline. However results need to show only what has happened in the last 24 hours. Which solution will meet these requirements MOST cost-effectively? A.Deploy Amazon Kinesis Data Firehose to accept incoming data from the loT devices and write the data to Amazon S3 Build a web dashboard to display the data from the last 24 hours B.Deploy an Amazon API Gateway API endpoint and an AWS Lambda function to process incoming data from the loT devices and store the data in Amazon DynamoDB Build a web dashboard to display the data from the last 24 hours C.Deploy an Amazon API Gateway API endpoint and an Amazon Simple Notification Service (Amazon SNS) tope to process incoming data from the loT devices Write the data to Amazon Redshift Build a web dashboard to display the data from the last 24 hours D.Deploy an Amazon Simple Queue Service (Amazon SOS) FIFO queue and an AWS Lambda function to process incoming data from the loT devices and store the data in an Amazon RDS DB instance Build a web dashboard to display the data from the last 24 hours Answer: D QUESTION 726 A company has designed an application where users provide small sets of textual data by calling a public API. The application runs on AWS and includes a public Amazon API Gateway API that forwards requests to an AWS Lambda function for processing. The Lambda function then writes the data to an Amazon Aurora Serverless database for consumption. The company is concerned that it could lose some user data it a Lambda function fails to process the request property or reaches a concurrency limit. What should a solutions architect recommend to resolve this concern? A.Split the existing Lambda function into two Lambda functions Configure one function to receive API Gateway requests and put relevant items into Amazon Simple Queue Service (Amazon SQS) Configure the other function to read items from Amazon SQS and save the data into Aurora B.Configure the Lambda function to receive API Gateway requests and write relevant items to Amazon ElastiCache Configure ElastiCache to save the data into Aurora C.Increase the memory for the Lambda function Configure Aurora to use the Multi-AZ feature D.Split the existing Lambda function into two Lambda functions Configure one function to receive API Gateway requests and put relevant items into Amazon Simple Notification Service (Amazon SNS) Configure the other function to read items from Amazon SNS and save the data into Aurora Answer: A QUESTION 727 A developer has a script lo generate daily reports that users previously ran manually. The script consistently completes in under 10 minutes. The developer needs to automate this process in a cost-effective manner. Which combination of services should the developer use? (Select TWO.) A.AWS Lambda B.AWS CloudTrail C.Cron on an Amazon EC2 instance D.Amazon EC2 On-Demand Instance with user data E.Amazon EventBridge (Amazon CloudWatch Events) Answer: CE QUESTION 728 A solution architect is creating a new Amazon CloudFront distribution for an application. Some of Ine information submitted by users is sensitive. The application uses HTTPS but needs another layer" of security. The sensitive information should be protected throughout the entire application stack end access to the information should be restricted to certain applications. Which action should the solutions architect take? A.Configure a CloudFront signed URL B.Configure a CloudFront signed cookie. C.Configure a CloudFront field-level encryption profile D.Configure CloudFront and set the Origin Protocol Policy setting to HTTPS Only for the Viewer Protocol Policy Answer: C QUESTION 729 A company has an Amazon S3 bucket that contains confidential information in its production AWS account. The company has turned on AWS CloudTrail for the account. The account sends a copy of its logs to Amazon CloudWatch Logs. The company has configured the S3 bucket to log read and write data events. A company auditor discovers that some objects in the S3 bucket have been deleted. A solutions architect must provide the auditor with information about who deleted the objects. What should the solutions architect do to provide this information? A.Create a CloudWatch Logs fitter to extract the S3 write API calls against the S3 bucket B.Query the CloudTrail togs with Amazon Athena to identify the S3 write API calls against the S3 bucket C.Use AWS Trusted Advisor to perform security checks for S3 write API calls that deleted the content D.Use AWS Config to track configuration changes on the S3 bucket Use these details to track the S3 write API calls that deleted the content Answer: B QUESTION 730 A company has three AWS accounts Management Development and Production. These accounts use AWS services only in the us-east-1 Region. All accounts have a VPC with VPC Flow Logs configured to publish data to an Amazon S3 bucket in each separate account. For compliance reasons the company needs an ongoing method to aggregate all the VPC flow logs across all accounts into one destination S3 bucket in the Management account. What should a solutions architect do to meet these requirements with the LEAST operational overhead? A.Add S3 Same-Region Replication rules in each S3 bucket that stores VPC flow logs to replicate objects to the destination S3 bucket Configure the destination S3 bucket to allow objects to be received from the S3 buckets in other accounts B.Set up an IAM user in the Management account Grant permissions to the IAM user to access the S3 buckets that contain the VPC flow logs Run the aws s3 sync command in the AWS CLl to copy the objects to the destination S3 bucket C.Use an S3 inventory report to specify which objects in the S3 buckets to copy Perform an S3 batch operation to copy the objects into the destination S3 bucket in the Management account with a single request. D.Create an AWS Lambda function in the Management account Grant S3 GET permissions on the source S3 buckets Grant S3 PUT permissions on the destination S3 bucket Configure the function to invoke when objects are loaded in the source S3 buckets Answer: A QUESTION 731 A company is running a multi-tier web application on AWS. The application runs its database on Amazon Aurora MySQL. The application and database tiers are in the us-easily Region. A database administrator who monitors the Aurora DB cluster finds that an intermittent increase in read traffic is creating high CPU utilization on the read replica. The result is increased read latency for the application. The memory and disk utilization of the DB instance are stable throughout the event of increased latency. What should a solutions architect do to improve the read scalability? A.Reboot the DB cluster B.Create a cross-Region read replica C.Configure Aurora Auto Scaling for the read replica D.Increase the provisioned read IOPS for the DB instance Answer: B QUESTION 732 A developer is creating an AWS Lambda function to perform dynamic updates to a database when an item is added to an Amazon Simple Queue Service (Amazon SOS) queue. A solutions architect must recommend a solution that tracks any usage of database credentials in AWS CloudTrail. The solution also must provide auditing capabilities. Which solution will meet these requirements? A.Store the encrypted credentials in a Lambda environment variable B.Create an Amazon DynamoDB table to store the credentials Encrypt the table C.Store the credentials as a secure string in AWS Systems Manager Parameter Store D.Use an AWS Key Management Service (AWS KMS) key store to store the credentials Answer: D QUESTION 733 A company has a service that reads and writes large amounts of data from an Amazon S3 bucket in the same AWS Region. The service is deployed on Amazon EC2 instances within the private subnet of a VPC. The service communicates with Amazon S3 over a NAT gateway in the public subnet. However, the company wants a solution that will reduce the data output costs. Which solution will meet these requirements MOST cost-effectively? A.Provision a dedicated EC2 NAT instance in the public subnet. Configure the route table for the private subnet to use the elastic network interface of this instance as the destination for all S3 traffic B.Provision a dedicated EC2 NAT instance in the private subnet. Configure the route table for the public subnet to use the elastic network interface of this instance as the destination for all S3 traffic. C.Provision a VPC gateway endpoint. Configure the route table for the private subnet to use the gateway endpoint as the route for all S3 traffic. D.Provision a second NAT gateway. Configure the route table foe the private subnet to use this NAT gateway as the destination for all S3 traffic. Answer: C QUESTION 734 A company has an application that uses an Amazon OynamoDB table lew storage. A solutions architect discovers that many requests to the table are not returning the latest data. The company's users have not reported any other issues with database performance Latency is in an acceptable range. Which design change should the solutions architect recommend? A.Add read replicas to the table. B.Use a global secondary index (GSI). C.Request strongly consistent reads for the table D.Request eventually consistent reads for the table. Answer: C QUESTION 735 A company wants lo share data that is collected from sell-driving cars with the automobile community. The data will be made available from within an Amazon S3 bucket. The company wants to minimize its cost of making this data available to other AWS accounts. What should a solutions architect do to accomplish this goal? A.Create an S3 VPC endpoint for the bucket. B.Configure the S3 bucket to be a Requester Pays bucket. C.Create an Amazon CloudFront distribution in front of the S3 bucket. D.Require that the fries be accessible only with the use of the BitTorrent protocol. Answer: A QUESTION 736 A company recently announced the deployment of its retail website to a global audience. The website runs on multiple Amazon EC2 instances behind an Elastic Load Balancer. The instances run in an Auto Scaling group across multiple Availability Zones. The company wants to provide its customers with different versions of content based on the devices that the customers use to access the website. Which combination of actions should a solutions architect take to meet these requirements7 (Select TWO.) A.Configure Amazon CloudFront to cache multiple versions of the content. B.Configure a host header in a Network Load Balancer to forward traffic to different instances. C.Configure a Lambda@Edge function to send specific objects to users based on the User-Agent header. D.Configure AWS Global Accelerator. Forward requests to a Network Load Balancer (NLB). Configure the NLB to set up host-based routing to different EC2 instances. E.Configure AWS Global Accelerator. Forward requests to a Network Load Balancer (NLB). Configure the NLB to set up path-based routing to different EC2 instances. Answer: BD QUESTION 737 A company has developed a new content-sharing application that runs on Amazon Elastic Container Service (Amazon ECS). The application runs on Amazon Linux Docker tasks that use the Amazon EC2 launch type. The application requires a storage solution that has the following characteristics: - Accessibility (or multiple ECS tasks through bind mounts - Resiliency across Availability Zones - Burslable throughput of up to 3 Gbps - Ability to be scaled up over time Which storage solution meets these requirements? A.Launch an Amazon FSx for Windows File Server Multi-AZ instance. Configure the ECS task definitions to mount the Amazon FSx instance volume at launch. B.Launch an Amazon Elastic File System (Amazon EFS) instance. Configure the ECS task definitions to mount the EFS Instance volume at launch. C.Create a Provisioned IOPS SSD (io2) Amazon Elastic Block Store (Amazon EBS) volume with Multi-Attach set to enabled. Attach the EBS volume to the ECS EC2 instance Configure ECS task definitions to mount the EBS instance volume at launch. D.Launch an EC2 instance with several Provisioned IOPS SSD (io2) Amazon Elastic Block Store (Amazon EBS) volumes attached m a RAID 0 configuration. Configure the EC2 instance as an NFS storage server. Configure ECS task definitions to mount the volumes at launch. Answer: B QUESTION 738 An airline that is based in the United States provides services for routes in North America and Europe. The airline is developing a new read-intensive application that customers can use to find flights on either continent. The application requires strong read consistency and needs scalable database capacity to accommodate changes in user demand. The airline needs the database service to synchronize with the least possible latency between the two continents and to provide a simple failover mechanism to a second AWS Region. Which solution will meet these requirements? A.Deploy Microsoft SQL Server on Amazon EC2 instances in a Region in North America. Use SOL Server binary log replication on an EC2 instance in a Region in Europe. B.Create an Amazon DynamoDB global table Add a Region from North America and a Region from Europe to the table. Query data with strongly consistent reads. C.Use an Amazon Aurora MySQL global database. Deploy the read-write node in a Region in North America, and deploy read-only endpoints in Regions in North America and Europe. Query data with global read consistency. D.Create a subscriber application that uses Amazon Kinesis Data Steams for an Amazon Redshift cluster in a Region in North America. Create a second subscriber application for the Amazon Redshift cluster in a Region in Europe. Process all database modifications through Kinesis Data Streams. Answer: C QUESTION 739 A company has a production web application in which users upload documents through a web interlace or a mobile app. According to a new regulatory requirement, new documents cannot be modified or deleted after they are stored. What should a solutions architect do to meet this requirement? A.Store the uploaded documents in an Amazon S3 bucket with S3 Versioning and S3 Object Lock enabled B.Store the uploaded documents in an Amazon S3 bucket. Configure an S3 Lifecycle policy to archive the documents periodically. C.Store the uploaded documents in an Amazon S3 bucket with S3 Versioning enabled Configure an ACL to restrict all access to read-only. D.Store the uploaded documents on an Amazon Elastic File System (Amazon EFS) volume. Access the data by mounting the volume in read-only mode. Answer: A QUESTION 740 A company has a Microsoft NET application that runs on an on-premises Windows Server. The application stores data by using an Oracle Database Standard Edition server. The company is planning a migration to AWS and wants to minimize development changes while moving the application. The AWS application environment should be highly available. Which combination of actions should the company take to meet these requirements? (Select TWO.) A.Refactor the application as serverless with AWS Lambda functions running NET Core. B.Rehost the application in AWS Elastic Beanstalk with the .NET platform in a Multi-AZ deployment. C.Replatform the application to run on Amazon EC2 with the Amazon Linus Amazon Machine Image (AMI). D.Use AWS Database Migration Service (AWS DMS) to migrate from the Oracle database to Amazon DynamoDB in a Multi-AZ deployment. E.Use AWS Database Migration Service (AWS DMS) to migrate from the Oracle database to Oracle on Amazon RDS in a Multi-AZ deployment. Answer: AD QUESTION 741 A company wants to enforce strict security guidelines on accessing AWS Cloud resources as the company migrates production workloads from its data centers. Company management wants all users to receive permissions according to their job roles and functions. Which solution meets these requirements with the LEAST operational overhead? A.Create an AWS Single Sign-On deployment. Connect to the on-premises Active Directory to centrally manage users and permissions across the company B.Create an IAM role for each job function. Require each employee to call the stsiAssumeRole action in the AWS Management Console to perform their job role. C.Create individual IAM user accounts for each employee Create an IAM policy for each job function, and attach the policy to all IAM users based on their job role. D.Create individual IAM user accounts for each employee. Create IAM policies for each job function. Create IAM groups, and attach associated policies to each group. Assign the IAM users to a group based on their Job role. Answer: D QUESTION 742 A company provides machine learning solutions .The company's users need to download large data sets from the company's Amazon S3 bucket. These downloads often take a long lime, especially when the users are running many simulations on a subset of those datasets. Users download the datasets to Amazon EC2 instances in the same AWS Region as the S3 bucket. Multiple users typically use the same datasets at the same time. Which solution will reduce the lime that is required to access the datasets? A.Configure the S3 bucket lo use the S3 Standard storage class with S3 Transfer Acceleration activated. B.Configure the S3 bucket to use the S3 Intelligent-Tiering storage class with S3 Transfer Acceleration activated. C.Create an Amazon Elastic File System (Amazon EFS) network Tile system. Migrate the datasets by using AWS DataSync. D.Move the datasets onto a General Purpose SSD (gp3) Amazon Elastic Block Store (Amazon EBS) volume. Attach the volume to all the EC2 instances. Answer: C QUESTION 743 A company needs to retain its AWS CloudTrail logs (or 3 years. The company is enforcing CloudTrail across a set of AWS accounts by using AWS Organizations from the parent account. The CloudTrail target S3 bucket is configured with S3 Versioning enabled. An S3 Lifecycle policy is in place to delete current objects after 3 years. After the fourth year of use of the S3 bucket, the S3 bucket metrics show that the number of objects has continued to rise. However, the number of new CloudTrail logs that are delivered to the S3 bucket has remained consistent. Which solution will delete objects that are older than 3 years in the MOST cost-effective manner? A.Configure the organization's centralized CloudTrail trail to expire objects after 3 years. B.Configure the S3 Lifecycle policy to delete previous versions as well as current versions. C.Create an AWS Lambda function to enumerate and delete objects from Amazon S3 that are older than 3 years. D.Configure the parent account as the owner of all objects that are delivered to the S3 bucket. Answer: B QUESTION 744 A company has a website hosted on AWS. The website is behind an Application Load Balancer (ALB) that is configured to handle HTTP and HTTPS separately. The company wants to forward all requests to the website so that the requests will use HTTPS. What should a solutions architect do to meet this requirement? A.Update the ALB's network ACL to accept only HTTPS traffic B.Create a rule that replaces the HTTP in the URL with HTTPS. C.Create a listener rule on the ALB to redirect HTTP traffic to HTTPS. D.Replace the ALB with a Network Load Balancer configured to use Server Name Indication (SNI). Answer: C QUESTION 745 A company is deploying an application that processes large quantities of data in batches as needed. The company plans to use Amazon EC2 instances for the workload. The network architecture must support a highly scalable solution and prevent groups of nodes from sharing the same underlying hardware. Which combination of network solutions will meet these requirements? (Select TWO.) A.Create Capacity Reservations for the EC2 instances to run in a placement group B.Run the EC2 instances in a spread placement group. C.Run the EC2 instances in a cluster placement group. D.Place the EC2 instances in an EC2 Auto Scaling group. E.Run the EC2 instances in a partition placement group. Answer: BC 2021 Latest Braindump2go SAA-C02 PDF and SAA-C02 VCE Dumps Free Share: https://drive.google.com/drive/folders/1_5IK3H_eM74C6AKwU7sKaLn1rrn8xTfm?usp=sharing