Dessieslife
50+ Views

[October-2021]New Braindump2go 300-815 PDF and VCE Dumps[Q105-Q119]

QUESTION 105
The SIP session refresh timer allows the RTP session to stay active during an active call. The Cisco UCM sends either SIP-INVITE or SIP-UPDATE messages in a regular interval of time throughout the active duration of the call. During a troubleshooting session, the engineer finds that the Cisco UCM is sending SIP-UPDATE as the SIP session refresher, and the engineer would like to use SIP-INVITE as the session refresher.
What configuration should be made in the Cisco UCM to achieve this?

A.Enable SIP ReMXX Options on the SIP profile.
B.Enable Send send-receive SDP in mid-call INVITE on the SIP profile.
C.Change Session Refresh Method on the SIP profile to INVITE.
D.Increase Retry INVITE to 20 seconds on the SIP profile.

Answer: C

QUESTION 106
Refer to the exhibit. ILS has been configured between two hubs using this configuration.
The hubs appear to register successfully, but ILS is not functioning as expected.
Which configuration step is missing?

A.A password has never been set for ILS.
B.Use TLS Certificates must be selected.
C.Trust certificates for ILS have not been installed on the clusters
D.The Cluster IDs have not been set to unique values

Answer: D

QUESTION 107
A new deployment is using MVA for a specific user on the sales team, but the user is having issues when dialing DTMF.
Which DTMF method must be configured in resolve the issue?

A.gateway
B.out-of-band
D.in-band

Answer: B

QUESTION 108
A single site reports that when they dial select numbers, the call connects, but they do not get audio. The administrator finds that the calls are not routing out of the normal gateway but out of another site's gateway due to a TEHO configuration.
What is the next step to diagnose and solve the issue?

A.Verify that IP routing is correct between the gateway and the IP phone.
B.Verify that the route pattern is not blocking calls to the destination number.
C.Verify that the dial peer of the gateway has the correct destination pattern configured.
D.Verify that the route pattern has the correct calling-party transformation mask

Answer: C

QUESTION 109
An engineer is configuring Cisco UCM lo forward parked calls back to the user who parked the call if it is not retrieved after a specified time interval. Which action must be taken to accomplish this task?

A.Configure device pools.
B.Configure service parameters
C.Configure enterprise softkeys.
D.Configure class of control.

Answer: B

QUESTION 110
Refer to the exhibit. An engineer is troubleshooting an issue with the caller not hearing a PSTN announcement before the SIP call has completed setup.
How must the engineer resolve this issue using the reliable provisional response of the SIP?

A.voice service voip sip send 180 sdp
B.voice service voip sip rehxx require 100rel
C.sip-ua disable-early-media 180
D.voice service voip sip no reMxx

Answer: B

QUESTION 111
Users are reporting that several inter-site calls are failing, and the message "not enough bandwidth" is showing on the display. Voice traffic between locations goes through corporate WAN. and Call Admission Control is enabled to limit the number of calls between sites.
How is the issue solved without increasing bandwidth utilization on the WAN links?

A.Disable Call Admission Control and let the calls use the amount of bandwidth they require.
B.Configure Call Queuing so that the user waits until there is bandwidth available
C.Configure AAR to reroute calls that are denied by Call Admission Control through the PSTN.
D.Reroute all calls through the PSTN and avoid using WAN.

Answer: C

QUESTION 112
An engineer must configure a Cisco UCM hunt list so that calls to users in a line group are routed to the first idle user and then the next.
Which distribution algorithm must be configured to accomplish this task?

A.top down
B.circular
C.broadcast
D.longest idle time

Answer: A

QUESTION 113
An administrator configured Cisco Unified Mobility to block access to remote destinations for certain caller IDs. A user reports that a blocked caller was able to reach a remote destination. Which action resolves the issue?

A.Configure Single Number Reach.
B.Configure an access list.
C.Configure a mobility identity.
D.Configure Mobile Voice Access.

Answer: B

QUESTION 114
Refer to the exhibit. An engineer is troubleshooting a call-establishment problem between Cisco Unified Border Element and Cisco UCM.
Which command set corrects the issue?

A.SIP binding in SIP configuration mode:
voice service voip sip
bind control source-interface GigabitEthernetO/0/0
bind media source-interface GigabitEthernetO/0/0
B.SIP binding In SIP configuration mode:
voice service volp
sip
bind control source-Interface GlgabltEthernetO/0/1
bind media source-Interface GlgabltEthernetO/0/1
C.SIP binding In dial-peer configuration mode:
dial-peer voice 300 voip
voice-class sip bind control source-interface GigabitEthernetO/0/1
voice-class sip bind media source- interface GigabitEthernetO/0/1
D.SIP binding in dial-peer configuration mode:
dial-peer voice 100 volp
voice-class sip bind control source-interface GigabitEthernetO/0/0
voice-class sip bind media source-interface GigabitEthernetO/0/0

Answer: D

QUESTION 115
Refer to the exhibit. Which change to the translation rule is needed to strip only the leading 9 from the digit string 9123548?

A.rule 1 /^9\(.*\)/A1/
B.rulel /.*\(3548S\)/^1/
C.rulel /^9\(\d*\)/^1/
D.rule 1/^9123548/^1/

Answer: A

QUESTION 116
A customer has multisite deployments with a globalized dial plan. The customer wants to route PSTN calls via the gateway assigned to each site.
Which two actions will fulfill the requirement? (Choose two.)

A.Create one route group for each site and one global route list for PSTN calls that point to the local route group.
B.Create a route group which has all the gateways and associate it to the device pool of every site.
C.Create one global route list for PSTN calls that points to one global PSTN route group.
D.Create a hunt group and assign it to each side route pattern
E.Assign one route group as a local route group in the device pool of the corresponding site.

Answer: AE

QUESTION 117
Refer to the exhibit. A company needs to ensure that all calls are normalized to E164 format.
Which configuration will ensure that the resulting digit string 14085554001 is created and will be routed to the E.164 routing schema?

A.Called Party Transformation Mask of + 14085554XXX
B.Called Party Transformation Mask of 1408555[35)XXX
C.Calling Party Transformation Mask of +1408555XXXX
D.Calling Party Transformation Mask of +14085554XXX

Answer: A

QUESTION 118
An engineer set up and successfully tested a TEHO solution on the Cisco UCM. PSTN calls are routed correctly using the IP WAN as close to the final PSTN destination as possible. However, suddenly, calls start using the backup local gateway instead. What is causing the issue?

A.WAN connectivity
B.LAN connectivity
C.route pattern
D.route list and route group

Answer: A

QUESTION 119
An administrator is asked to configure egress call routing by applying globalization and localization on Cisco UCM.
How should this be accomplished?

A.Localize the calling and called numbers to PSTN format and globalize the calling and called numbers in the gateway.
B.Globalize the calling and called numbers to PSTN format and localize the calling number in the gateway.
C.Localize the calling and called numbers to E. 164 format and globalize the called number in the gateway.
D.Globalize the calling and called numbers to E. 164 format and localize the called number in the gateway.

Answer: D

2021 Latest Braindump2go 300-815 PDF and 300-815 VCE Dumps Free Share:
Comment
Suggested
Recent
Cards you may also be interested in
010-160 Testfragen, 010-160 Prüfungsfragen deutsch
Lpi 010-160 Testfragen, 010-160 Prüfungsfragen deutsch zertifizierung buch Linux Essentials Certificate Exam, version 1.6 www.itpruefungsfragen.de hilft Ihnen, originale Lpi 010-160 zertifizierung buch deutsch Linux Essentials Certificate Exam, version 1.6 in einer echten Umgebung zu finden. Wenn Sie ein Anfänger sind und Ihre beruflichen Fähigkeiten verbessern wollen, werden die Fragen zur Lpi 010-160 Zertifizierungsprüfung von www.itpruefungsfragen.de Ihnen helfen, Ihren Traum Schritt für Schritt zu erfüllen. Wir werden alle Ihren Fragen bezüglich der Prüfung lösen. Innerhalb eines Jahres bieten wir Ihnen kostenlosen Update-Service. Bitte schenken Sie unserer Website mehr Aufmerksamkeit. Lpi Linux Essentials 010-160 Prüfungsfragen Prüfungsunterlagen Info zu dieser Prüfungsvorbereitung 010-160 Prüfungsnummer:010-160 Prüfungsname:Linux Essentials Certificate Exam, version 1.6 Anzahl:80 Prüfungsfragen mit Lösungen www.itpruefungsfragen.de steht Ihnen ein umfassendes und zuverlässiges Konzept zur Lpi 010-160 Zertifizierungsprüfung zur Verfügung. Unser Konzept bietet Ihnen eine 100%-Pass-Garantie. Außerdem bieten wir Ihnen einen einjährigen kostenlosen Update-Service. Sie können im Internet kostenlos die Software und Prüfungsfragen und Antworten zur Lpi 010-160 Zertifizierungsprüfung als Probe herunterladen. In der heute konkurrenfähigen IT-Branche können Sie mit IT-Zertifikaten Schritt für Schritt befördert werden. Viele Firmen würden Ihnen einen Berufsaufstieg oder die Gehaltserhöhung laut dem Goldgehalt Ihrer Zertifikate geben. Die Lpi 010-160 Zertifizierungsprüfung ist eine Prüfung von hohem Goldgehalt. Das Lpi 010-160 Zertifikat könne die Bedürfnisse der hart arbeitenden IT-Fachleuten abdecken. www.itpruefungsfragen.de bietet Ihnen die zielgerichtete Ausbildung zur 010-160 Zertifizierungsprüfung. Sie können im Internet teilweise die Prüfungsfragen und Anworten zur Lpi 010-160 Zertifizierungsprüfung kostenlos als Probe herunterladen.
[June-2021]Braindump2go New Professional-Cloud-Architect PDF and VCE Dumps Free Share(Q200-Q232)
QUESTION 200 You are monitoring Google Kubernetes Engine (GKE) clusters in a Cloud Monitoring workspace. As a Site Reliability Engineer (SRE), you need to triage incidents quickly. What should you do? A.Navigate the predefined dashboards in the Cloud Monitoring workspace, and then add metrics and create alert policies. B.Navigate the predefined dashboards in the Cloud Monitoring workspace, create custom metrics, and install alerting software on a Compute Engine instance. C.Write a shell script that gathers metrics from GKE nodes, publish these metrics to a Pub/Sub topic, export the data to BigQuery, and make a Data Studio dashboard. D.Create a custom dashboard in the Cloud Monitoring workspace for each incident, and then add metrics and create alert policies. Answer: D QUESTION 201 You are implementing a single Cloud SQL MySQL second-generation database that contains business-critical transaction data. You want to ensure that the minimum amount of data is lost in case of catastrophic failure. Which two features should you implement? (Choose two.) A.Sharding B.Read replicas C.Binary logging D.Automated backups E.Semisynchronous replication Answer: CD QUESTION 202 You are working at a sports association whose members range in age from 8 to 30. The association collects a large amount of health data, such as sustained injuries. You are storing this data in BigQuery. Current legislation requires you to delete such information upon request of the subject. You want to design a solution that can accommodate such a request. What should you do? A.Use a unique identifier for each individual. Upon a deletion request, delete all rows from BigQuery with this identifier. B.When ingesting new data in BigQuery, run the data through the Data Loss Prevention (DLP) API to identify any personal information. As part of the DLP scan, save the result to Data Catalog. Upon a deletion request, query Data Catalog to find the column with personal information. C.Create a BigQuery view over the table that contains all data. Upon a deletion request, exclude the rows that affect the subject's data from this view. Use this view instead of the source table for all analysis tasks. D.Use a unique identifier for each individual. Upon a deletion request, overwrite the column with the unique identifier with a salted SHA256 of its value. Answer: B QUESTION 203 Your company has announced that they will be outsourcing operations functions. You want to allow developers to easily stage new versions of a cloud-based application in the production environment and allow the outsourced operations team to autonomously promote staged versions to production. You want to minimize the operational overhead of the solution. Which Google Cloud product should you migrate to? A.App Engine B.GKE On-Prem C.Compute Engine D.Google Kubernetes Engine Answer: D QUESTION 204 Your company is running its application workloads on Compute Engine. The applications have been deployed in production, acceptance, and development environments. The production environment is business-critical and is used 24/7, while the acceptance and development environments are only critical during office hours. Your CFO has asked you to optimize these environments to achieve cost savings during idle times. What should you do? A.Create a shell script that uses the gcloud command to change the machine type of the development and acceptance instances to a smaller machine type outside of office hours. Schedule the shell script on one of the production instances to automate the task. B.Use Cloud Scheduler to trigger a Cloud Function that will stop the development and acceptance environments after office hours and start them just before office hours. C.Deploy the development and acceptance applications on a managed instance group and enable autoscaling. D.Use regular Compute Engine instances for the production environment, and use preemptible VMs for the acceptance and development environments. Answer: D QUESTION 205 You are moving an application that uses MySQL from on-premises to Google Cloud. The application will run on Compute Engine and will use Cloud SQL. You want to cut over to the Compute Engine deployment of the application with minimal downtime and no data loss to your customers. You want to migrate the application with minimal modification. You also need to determine the cutover strategy. What should you do? A.1. Set up Cloud VPN to provide private network connectivity between the Compute Engine application and the on-premises MySQL server. 2. Stop the on-premises application. 3. Create a mysqldump of the on-premises MySQL server. 4. Upload the dump to a Cloud Storage bucket. 5. Import the dump into Cloud SQL. 6. Modify the source code of the application to write queries to both databases and read from its local database. 7. Start the Compute Engine application. 8. Stop the on-premises application. B.1. Set up Cloud SQL proxy and MySQL proxy. 2. Create a mysqldump of the on-premises MySQL server. 3. Upload the dump to a Cloud Storage bucket. 4. Import the dump into Cloud SQL. 5. Stop the on-premises application. 6. Start the Compute Engine application. C.1. Set up Cloud VPN to provide private network connectivity between the Compute Engine application and the on-premises MySQL server. 2. Stop the on-premises application. 3. Start the Compute Engine application, configured to read and write to the on-premises MySQL server. 4. Create the replication configuration in Cloud SQL. 5. Configure the source database server to accept connections from the Cloud SQL replica. 6. Finalize the Cloud SQL replica configuration. 7. When replication has been completed, stop the Compute Engine application. 8. Promote the Cloud SQL replica to a standalone instance. 9. Restart the Compute Engine application, configured to read and write to the Cloud SQL standalone instance. D.1. Stop the on-premises application. 2. Create a mysqldump of the on-premises MySQL server. 3. Upload the dump to a Cloud Storage bucket. 4. Import the dump into Cloud SQL. 5. Start the application on Compute Engine. Answer: A QUESTION 206 Your organization has decided to restrict the use of external IP addresses on instances to only approved instances. You want to enforce this requirement across all of your Virtual Private Clouds (VPCs). What should you do? A.Remove the default route on all VPCs. Move all approved instances into a new subnet that has a default route to an internet gateway. B.Create a new VPC in custom mode. Create a new subnet for the approved instances, and set a default route to the internet gateway on this new subnet. C.Implement a Cloud NAT solution to remove the need for external IP addresses entirely. D.Set an Organization Policy with a constraint on constraints/compute.vmExternalIpAccess. List the approved instances in the allowedValues list. Answer: D QUESTION 207 Your company uses the Firewall Insights feature in the Google Network Intelligence Center. You have several firewall rules applied to Compute Engine instances. You need to evaluate the efficiency of the applied firewall ruleset. When you bring up the Firewall Insights page in the Google Cloud Console, you notice that there are no log rows to display. What should you do to troubleshoot the issue? A.Enable Virtual Private Cloud (VPC) flow logging. B.Enable Firewall Rules Logging for the firewall rules you want to monitor. C.Verify that your user account is assigned the compute.networkAdmin Identity and Access Management (IAM) role. D.Install the Google Cloud SDK, and verify that there are no Firewall logs in the command line output. Answer: B QUESTION 208 Your company has sensitive data in Cloud Storage buckets. Data analysts have Identity Access Management (IAM) permissions to read the buckets. You want to prevent data analysts from retrieving the data in the buckets from outside the office network. What should you do? A.1. Create a VPC Service Controls perimeter that includes the projects with the buckets. 2. Create an access level with the CIDR of the office network. B.1. Create a firewall rule for all instances in the Virtual Private Cloud (VPC) network for source range. 2. Use the Classless Inter-domain Routing (CIDR) of the office network. C.1. Create a Cloud Function to remove IAM permissions from the buckets, and another Cloud Function to add IAM permissions to the buckets. 2. Schedule the Cloud Functions with Cloud Scheduler to add permissions at the start of business and remove permissions at the end of business. D.1. Create a Cloud VPN to the office network. 2. Configure Private Google Access for on-premises hosts. Answer: C QUESTION 209 You have developed a non-critical update to your application that is running in a managed instance group, and have created a new instance template with the update that you want to release. To prevent any possible impact to the application, you don't want to update any running instances. You want any new instances that are created by the managed instance group to contain the new update. What should you do? A.Start a new rolling restart operation. B.Start a new rolling replace operation. C.Start a new rolling update. Select the Proactive update mode. D.Start a new rolling update. Select the Opportunistic update mode. Answer: C QUESTION 210 Your company is designing its application landscape on Compute Engine. Whenever a zonal outage occurs, the application should be restored in another zone as quickly as possible with the latest application data. You need to design the solution to meet this requirement. What should you do? A.Create a snapshot schedule for the disk containing the application data. Whenever a zonal outage occurs, use the latest snapshot to restore the disk in the same zone. B.Configure the Compute Engine instances with an instance template for the application, and use a regional persistent disk for the application data. Whenever a zonal outage occurs, use the instance template to spin up the application in another zone in the same region. Use the regional persistent disk for the application data. C.Create a snapshot schedule for the disk containing the application data. Whenever a zonal outage occurs, use the latest snapshot to restore the disk in another zone within the same region. D.Configure the Compute Engine instances with an instance template for the application, and use a regional persistent disk for the application data. Whenever a zonal outage occurs, use the instance template to spin up the application in another region. Use the regional persistent disk for the application data, Answer: D QUESTION 211 Your company has just acquired another company, and you have been asked to integrate their existing Google Cloud environment into your company's data center. Upon investigation, you discover that some of the RFC 1918 IP ranges being used in the new company's Virtual Private Cloud (VPC) overlap with your data center IP space. What should you do to enable connectivity and make sure that there are no routing conflicts when connectivity is established? A.Create a Cloud VPN connection from the new VPC to the data center, create a Cloud Router, and apply new IP addresses so there is no overlapping IP space. B.Create a Cloud VPN connection from the new VPC to the data center, and create a Cloud NAT instance to perform NAT on the overlapping IP space. C.Create a Cloud VPN connection from the new VPC to the data center, create a Cloud Router, and apply a custom route advertisement to block the overlapping IP space. D.Create a Cloud VPN connection from the new VPC to the data center, and apply a firewall rule that blocks the overlapping IP space. Answer: A QUESTION 212 You need to migrate Hadoop jobs for your company's Data Science team without modifying the underlying infrastructure. You want to minimize costs and infrastructure management effort. What should you do? A.Create a Dataproc cluster using standard worker instances. B.Create a Dataproc cluster using preemptible worker instances. C.Manually deploy a Hadoop cluster on Compute Engine using standard instances. D.Manually deploy a Hadoop cluster on Compute Engine using preemptible instances. Answer: A QUESTION 213 Your company has a project in Google Cloud with three Virtual Private Clouds (VPCs). There is a Compute Engine instance on each VPC. Network subnets do not overlap and must remain separated. The network configuration is shown below. Instance #1 is an exception and must communicate directly with both Instance #2 and Instance #3 via internal IPs. How should you accomplish this? A.Create a cloud router to advertise subnet #2 and subnet #3 to subnet #1. B.Add two additional NICs to Instance #1 with the following configuration: • NIC1 ○ VPC: VPC #2 ○ SUBNETWORK: subnet #2 • NIC2 ○ VPC: VPC #3 ○ SUBNETWORK: subnet #3 Update firewall rules to enable traffic between instances. C.Create two VPN tunnels via CloudVPN: • 1 between VPC #1 and VPC #2. • 1 between VPC #2 and VPC #3. Update firewall rules to enable traffic between the instances. D.Peer all three VPCs: • Peer VPC #1 with VPC #2. • Peer VPC #2 with VPC #3. Update firewall rules to enable traffic between the instances. Answer: B QUESTION 214 You need to deploy an application on Google Cloud that must run on a Debian Linux environment. The application requires extensive configuration in order to operate correctly. You want to ensure that you can install Debian distribution updates with minimal manual intervention whenever they become available. What should you do? A.Create a Compute Engine instance template using the most recent Debian image. Create an instance from this template, and install and configure the application as part of the startup script. Repeat this process whenever a new Google-managed Debian image becomes available. B.Create a Debian-based Compute Engine instance, install and configure the application, and use OS patch management to install available updates. C.Create an instance with the latest available Debian image. Connect to the instance via SSH, and install and configure the application on the instance. Repeat this process whenever a new Google-managed Debian image becomes available. D.Create a Docker container with Debian as the base image. Install and configure the application as part of the Docker image creation process. Host the container on Google Kubernetes Engine and restart the container whenever a new update is available. Answer: B QUESTION 215 You have an application that runs in Google Kubernetes Engine (GKE). Over the last 2 weeks, customers have reported that a specific part of the application returns errors very frequently. You currently have no logging or monitoring solution enabled on your GKE cluster. You want to diagnose the problem, but you have not been able to replicate the issue. You want to cause minimal disruption to the application. What should you do? A.1. Update your GKE cluster to use Cloud Operations for GKE. 2. Use the GKE Monitoring dashboard to investigate logs from affected Pods. B.1. Create a new GKE cluster with Cloud Operations for GKE enabled. 2. Migrate the affected Pods to the new cluster, and redirect traffic for those Pods to the new cluster. 3. Use the GKE Monitoring dashboard to investigate logs from affected Pods. C.1. Update your GKE cluster to use Cloud Operations for GKE, and deploy Prometheus. 2. Set an alert to trigger whenever the application returns an error. D.1. Create a new GKE cluster with Cloud Operations for GKE enabled, and deploy Prometheus. 2. Migrate the affected Pods to the new cluster, and redirect traffic for those Pods to the new cluster. 3. Set an alert to trigger whenever the application returns an error. Answer: C QUESTION 216 You need to deploy a stateful workload on Google Cloud. The workload can scale horizontally, but each instance needs to read and write to the same POSIX filesystem. At high load, the stateful workload needs to support up to 100 MB/s of writes. What should you do? A.Use a persistent disk for each instance. B.Use a regional persistent disk for each instance. C.Create a Cloud Filestore instance and mount it in each instance. D.Create a Cloud Storage bucket and mount it in each instance using gcsfuse. Answer: D QUESTION 217 Your company has an application deployed on Anthos clusters (formerly Anthos GKE) that is running multiple microservices. The cluster has both Anthos Service Mesh and Anthos Config Management configured. End users inform you that the application is responding very slowly. You want to identify the microservice that is causing the delay. What should you do? A.Use the Service Mesh visualization in the Cloud Console to inspect the telemetry between the microservices. B.Use Anthos Config Management to create a ClusterSelector selecting the relevant cluster. On the Google Cloud Console page for Google Kubernetes Engine, view the Workloads and filter on the cluster. Inspect the configurations of the filtered workloads. C.Use Anthos Config Management to create a namespaceSelector selecting the relevant cluster namespace. On the Google Cloud Console page for Google Kubernetes Engine, visit the workloads and filter on the namespace. Inspect the configurations of the filtered workloads. D.Reinstall istio using the default istio profile in order to collect request latency. Evaluate the telemetry between the microservices in the Cloud Console. Answer: A QUESTION 218 You are working at a financial institution that stores mortgage loan approval documents on Cloud Storage. Any change to these approval documents must be uploaded as a separate approval file, so you want to ensure that these documents cannot be deleted or overwritten for the next 5 years. What should you do? A.Create a retention policy on the bucket for the duration of 5 years. Create a lock on the retention policy. B.Create the bucket with uniform bucket-level access, and grant a service account the role of Object Writer. Use the service account to upload new files. C.Use a customer-managed key for the encryption of the bucket. Rotate the key after 5 years. D.Create the bucket with fine-grained access control, and grant a service account the role of Object Writer. Use the service account to upload new files. Answer: A QUESTION 219 Your team will start developing a new application using microservices architecture on Kubernetes Engine. As part of the development lifecycle, any code change that has been pushed to the remote develop branch on your GitHub repository should be built and tested automatically. When the build and test are successful, the relevant microservice will be deployed automatically in the development environment. You want to ensure that all code deployed in the development environment follows this process. What should you do? A.Have each developer install a pre-commit hook on their workstation that tests the code and builds the container when committing on the development branch. After a successful commit, have the developer deploy the newly built container image on the development cluster. B.Install a post-commit hook on the remote git repository that tests the code and builds the container when code is pushed to the development branch. After a successful commit, have the developer deploy the newly built container image on the development cluster. C.Create a Cloud Build trigger based on the development branch that tests the code, builds the container, and stores it in Container Registry. Create a deployment pipeline that watches for new images and deploys the new image on the development cluster. Ensure only the deployment tool has access to deploy new versions. D.Create a Cloud Build trigger based on the development branch to build a new container image and store it in Container Registry. Rely on Vulnerability Scanning to ensure the code tests succeed. As the final step of the Cloud Build process, deploy the new container image on the development cluster. Ensure only Cloud Build has access to deploy new versions. Answer: A QUESTION 220 Your operations team has asked you to help diagnose a performance issue in a production application that runs on Compute Engine. The application is dropping requests that reach it when under heavy load. The process list for affected instances shows a single application process that is consuming all available CPU, and autoscaling has reached the upper limit of instances. There is no abnormal load on any other related systems, including the database. You want to allow production traffic to be served again as quickly as possible. Which action should you recommend? A.Change the autoscaling metric to agent.googleapis.com/memory/percent_used. B.Restart the affected instances on a staggered schedule. C.SSH to each instance and restart the application process. D.Increase the maximum number of instances in the autoscaling group. Answer: A QUESTION 221 You are implementing the infrastructure for a web service on Google Cloud. The web service needs to receive and store the data from 500,000 requests per second. The data will be queried later in real time, based on exact matches of a known set of attributes. There will be periods where the web service will not receive any requests. The business wants to keep costs low. Which web service platform and database should you use for the application? A.Cloud Run and BigQuery B.Cloud Run and Cloud Bigtable C.A Compute Engine autoscaling managed instance group and BigQuery D.A Compute Engine autoscaling managed instance group and Cloud Bigtable Answer: D QUESTION 222 You are developing an application using different microservices that should remain internal to the cluster. You want to be able to configure each microservice with a specific number of replicas. You also want to be able to address a specific microservice from any other microservice in a uniform way, regardless of the number of replicas the microservice scales to. You need to implement this solution on Google Kubernetes Engine. What should you do? A.Deploy each microservice as a Deployment. Expose the Deployment in the cluster using a Service, and use the Service DNS name to address it from other microservices within the cluster. B.Deploy each microservice as a Deployment. Expose the Deployment in the cluster using an Ingress, and use the Ingress IP address to address the Deployment from other microservices within the cluster. C.Deploy each microservice as a Pod. Expose the Pod in the cluster using a Service, and use the Service DNS name to address the microservice from other microservices within the cluster. D.Deploy each microservice as a Pod. Expose the Pod in the cluster using an Ingress, and use the Ingress IP address name to address the Pod from other microservices within the cluster. Answer: A QUESTION 223 Your company has a networking team and a development team. The development team runs applications on Compute Engine instances that contain sensitive data. The development team requires administrative permissions for Compute Engine. Your company requires all network resources to be managed by the networking team. The development team does not want the networking team to have access to the sensitive data on the instances. What should you do? A.1. Create a project with a standalone VPC and assign the Network Admin role to the networking team. 2. Create a second project with a standalone VPC and assign the Compute Admin role to the development team. 3. Use Cloud VPN to join the two VPCs. B.1. Create a project with a standalone Virtual Private Cloud (VPC), assign the Network Admin role to the networking team, and assign the Compute Admin role to the development team. C.1. Create a project with a Shared VPC and assign the Network Admin role to the networking team. 2. Create a second project without a VPC, configure it as a Shared VPC service project, and assign the Compute Admin role to the development team. D.1. Create a project with a standalone VPC and assign the Network Admin role to the networking team. 2. Create a second project with a standalone VPC and assign the Compute Admin role to the development team. 3. Use VPC Peering to join the two VPCs. Answer: C QUESTION 224 Your company wants you to build a highly reliable web application with a few public APIs as the backend. You don't expect a lot of user traffic, but traffic could spike occasionally. You want to leverage Cloud Load Balancing, and the solution must be cost-effective for users. What should you do? A.Store static content such as HTML and images in Cloud CDN. Host the APIs on App Engine and store the user data in Cloud SQL. B.Store static content such as HTML and images in a Cloud Storage bucket. Host the APIs on a zonal Google Kubernetes Engine cluster with worker nodes in multiple zones, and save the user data in Cloud Spanner. C.Store static content such as HTML and images in Cloud CDN. Use Cloud Run to host the APIs and save the user data in Cloud SQL. D.Store static content such as HTML and images in a Cloud Storage bucket. Use Cloud Functions to host the APIs and save the user data in Firestore. Answer: B QUESTION 225 Your company sends all Google Cloud logs to Cloud Logging. Your security team wants to monitor the logs. You want to ensure that the security team can react quickly if an anomaly such as an unwanted firewall change or server breach is detected. You want to follow Google-recommended practices. What should you do? A.Schedule a cron job with Cloud Scheduler. The scheduled job queries the logs every minute for the relevant events. B.Export logs to BigQuery, and trigger a query in BigQuery to process the log data for the relevant events. C.Export logs to a Pub/Sub topic, and trigger Cloud Function with the relevant log events. D.Export logs to a Cloud Storage bucket, and trigger Cloud Run with the relevant log events. Answer: C QUESTION 226 You have deployed several instances on Compute Engine. As a security requirement, instances cannot have a public IP address. There is no VPN connection between Google Cloud and your office, and you need to connect via SSH into a specific machine without violating the security requirements. What should you do? A.Configure Cloud NAT on the subnet where the instance is hosted. Create an SSH connection to the Cloud NAT IP address to reach the instance. B.Add all instances to an unmanaged instance group. Configure TCP Proxy Load Balancing with the instance group as a backend. Connect to the instance using the TCP Proxy IP. C.Configure Identity-Aware Proxy (IAP) for the instance and ensure that you have the role of IAP-secured Tunnel User. Use the gcloud command line tool to ssh into the instance. D.Create a bastion host in the network to SSH into the bastion host from your office location. From the bastion host, SSH into the desired instance. Answer: D QUESTION 227 Your company is using Google Cloud. You have two folders under the Organization: Finance and Shopping. The members of the development team are in a Google Group. The development team group has been assigned the Project Owner role on the Organization. You want to prevent the development team from creating resources in projects in the Finance folder. What should you do? A.Assign the development team group the Project Viewer role on the Finance folder, and assign the development team group the Project Owner role on the Shopping folder. B.Assign the development team group only the Project Viewer role on the Finance folder. C.Assign the development team group the Project Owner role on the Shopping folder, and remove the development team group Project Owner role from the Organization. D.Assign the development team group only the Project Owner role on the Shopping folder. Answer: C QUESTION 228 You are developing your microservices application on Google Kubernetes Engine. During testing, you want to validate the behavior of your application in case a specific microservice should suddenly crash. What should you do? A.Add a taint to one of the nodes of the Kubernetes cluster. For the specific microservice, configure a pod anti-affinity label that has the name of the tainted node as a value. B.Use Istio's fault injection on the particular microservice whose faulty behavior you want to simulate. C.Destroy one of the nodes of the Kubernetes cluster to observe the behavior. D.Configure Istio's traffic management features to steer the traffic away from a crashing microservice. Answer: C QUESTION 229 Your company is developing a new application that will allow globally distributed users to upload pictures and share them with other selected users. The application will support millions of concurrent users. You want to allow developers to focus on just building code without having to create and maintain the underlying infrastructure. Which service should you use to deploy the application? A.App Engine B.Cloud Endpoints C.Compute Engine D.Google Kubernetes Engine Answer: A QUESTION 230 Your company provides a recommendation engine for retail customers. You are providing retail customers with an API where they can submit a user ID and the API returns a list of recommendations for that user. You are responsible for the API lifecycle and want to ensure stability for your customers in case the API makes backward-incompatible changes. You want to follow Google-recommended practices. What should you do? A.Create a distribution list of all customers to inform them of an upcoming backward-incompatible change at least one month before replacing the old API with the new API. B.Create an automated process to generate API documentation, and update the public API documentation as part of the CI/CD process when deploying an update to the API. C.Use a versioning strategy for the APIs that increases the version number on every backward-incompatible change. D.Use a versioning strategy for the APIs that adds the suffix "DEPRECATED" to the current API version number on every backward-incompatible change. Use the current version number for the new API. Answer: A QUESTION 231 Your company has developed a monolithic, 3-tier application to allow external users to upload and share files. The solution cannot be easily enhanced and lacks reliability. The development team would like to re-architect the application to adopt microservices and a fully managed service approach, but they need to convince their leadership that the effort is worthwhile. Which advantage(s) should they highlight to leadership? A.The new approach will be significantly less costly, make it easier to manage the underlying infrastructure, and automatically manage the CI/CD pipelines. B.The monolithic solution can be converted to a container with Docker. The generated container can then be deployed into a Kubernetes cluster. C.The new approach will make it easier to decouple infrastructure from application, develop and release new features, manage the underlying infrastructure, manage CI/CD pipelines and perform A/B testing, and scale the solution if necessary. D.The process can be automated with Migrate for Compute Engine. Answer: C QUESTION 232 Your team is developing a web application that will be deployed on Google Kubernetes Engine (GKE). Your CTO expects a successful launch and you need to ensure your application can handle the expected load of tens of thousands of users. You want to test the current deployment to ensure the latency of your application stays below a certain threshold. What should you do? A.Use a load testing tool to simulate the expected number of concurrent users and total requests to your application, and inspect the results. B.Enable autoscaling on the GKE cluster and enable horizontal pod autoscaling on your application deployments. Send curl requests to your application, and validate if the auto scaling works. C.Replicate the application over multiple GKE clusters in every Google Cloud region. Configure a global HTTP(S) load balancer to expose the different clusters over a single global IP address. D.Use Cloud Debugger in the development environment to understand the latency between the different microservices. Answer: B 2021 Latest Braindump2go Professional-Cloud-Architect PDF and VCE Dumps Free Share: https://drive.google.com/drive/folders/1kpEammLORyWlbsrFj1myvn2AVB18xtIR?usp=sharing
[2021-July-Version]New Braindump2go MS-203 PDF and MS-203 VCE Dumps(Q205-Q225)
QUESTION 206 Case Study: 3 - Fabrikam, Inc Overview Fabrikam, Inc. is a consulting company that has a main office in Montreal. Fabrikam has a partnership with a company named Litware, Inc. Existing Environment Network Environment The on-premises network of Fabrikam contains an Active Directory domain named fabrikam.com. Fabrikam has a Microsoft 365 tenant named fabrikam.com. All users have Microsoft 365 Enterprise E5 licenses. User accounts sync between Active Directory Domain Services (AD DS) and the Microsoft 365 tenant. Fabrikam.com contains the users and devices shown in the following table. Fabrikam currently leases mobile devices from several mobile operators. Microsoft Exchange Online Environment All users are assigned an Outlook Web App policy named FilesPolicy. In-Place Archiving is disabled for Exchange Online. You have the users shown in the following table. User1 and User3 use Microsoft Outlook for iOS and Android to access email from their mobile device. User2 uses a native Android email app. A Safe Links policy in Microsoft Defender for Office 365 is applied to the fabrikam.com tenant. The marketing department uses a mail-enabled public folder named FabrikamProject. Default MRM Policy is disabled for the fabrikam.com tenant. Problem Statements Fabrikam identifies the following issues: Users report that they receive phishing emails containing embedded links. Users download and save ASPX files when they use Outlook on the web. Email between Fabrikam and Litware is unencrypted during transit. User2 reports that he lost his mobile device. Requirements Planned Changes Fabrikam plans to implement the following changes: Configure FilesPolicy to prevent Outlook on the web users from downloading attachments that have the ASPX extension. Purchase a new smartboard and configure the smartboard as a booking resource in Exchange Online. Ensure that the new smartboard can only be booked for a maximum of one hour. Allow only Admin1 to accept or deny booking requests for the new smartboard. Standardize mobile device costs by moving to a single mobile device operator. Migrate the FabrikamProject public folder to Microsoft SharePoint Online. Enable In-Place Archiving for users in the marketing department. Encrypt all email between Fabrikam and Litware. Technical Requirements Fabrikam identifies the following technical requirements: Ensure that the planned Sharepoint site for FabrikamProject only contains content that was created during the last 12 months. Any existing file types that are currently configured as blocked or allowed in the FilesPolicy policy must remain intact. When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2. Generate a report that identifies mobile devices and the mobile device operator of each device. Use the principle of least privilege. Minimize administrative effort. Retention requirements Fabrikam identifies the following retention requirements for all users: Enable users to tag items for deletion after one year. Enable users to tag items for deletion after two years. Enable users to tag items to be archived after one year. Automatically delete items in the Junk Email folder after 30 days. Automatically delete items in the Sent Items folder after 300 days. Ensure that any items without a retention tag are moved to the Archive mailbox two years after they were created and permanently deleted seven years after they were created. You need to generate a report for the mobile devices that meets the technical requirements. Which PowerShell cmdlet should you use? A.Get-DevicePolicy B.Get-MobileDevice C.Get-MobileDeviceStatistics D.Get-DeviceTenantPolicy Answer: B QUESTION 207 Case Study: 3 - Fabrikam, Inc Overview Fabrikam, Inc. is a consulting company that has a main office in Montreal. Fabrikam has a partnership with a company named Litware, Inc. Existing Environment Network Environment The on-premises network of Fabrikam contains an Active Directory domain named fabrikam.com. Fabrikam has a Microsoft 365 tenant named fabrikam.com. All users have Microsoft 365 Enterprise E5 licenses. User accounts sync between Active Directory Domain Services (AD DS) and the Microsoft 365 tenant. Fabrikam.com contains the users and devices shown in the following table. Fabrikam currently leases mobile devices from several mobile operators. Microsoft Exchange Online Environment All users are assigned an Outlook Web App policy named FilesPolicy. In-Place Archiving is disabled for Exchange Online. You have the users shown in the following table. User1 and User3 use Microsoft Outlook for iOS and Android to access email from their mobile device. User2 uses a native Android email app. A Safe Links policy in Microsoft Defender for Office 365 is applied to the fabrikam.com tenant. The marketing department uses a mail-enabled public folder named FabrikamProject. Default MRM Policy is disabled for the fabrikam.com tenant. Problem Statements Fabrikam identifies the following issues: Users report that they receive phishing emails containing embedded links. Users download and save ASPX files when they use Outlook on the web. Email between Fabrikam and Litware is unencrypted during transit. User2 reports that he lost his mobile device. Requirements Planned Changes Fabrikam plans to implement the following changes: Configure FilesPolicy to prevent Outlook on the web users from downloading attachments that have the ASPX extension. Purchase a new smartboard and configure the smartboard as a booking resource in Exchange Online. Ensure that the new smartboard can only be booked for a maximum of one hour. Allow only Admin1 to accept or deny booking requests for the new smartboard. Standardize mobile device costs by moving to a single mobile device operator. Migrate the FabrikamProject public folder to Microsoft SharePoint Online. Enable In-Place Archiving for users in the marketing department. Encrypt all email between Fabrikam and Litware. Technical Requirements Fabrikam identifies the following technical requirements: Ensure that the planned Sharepoint site for FabrikamProject only contains content that was created during the last 12 months. Any existing file types that are currently configured as blocked or allowed in the FilesPolicy policy must remain intact. When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2. Generate a report that identifies mobile devices and the mobile device operator of each device. Use the principle of least privilege. Minimize administrative effort. Retention requirements Fabrikam identifies the following retention requirements for all users: Enable users to tag items for deletion after one year. Enable users to tag items for deletion after two years. Enable users to tag items to be archived after one year. Automatically delete items in the Junk Email folder after 30 days. Automatically delete items in the Sent Items folder after 300 days. Ensure that any items without a retention tag are moved to the Archive mailbox two years after they were created and permanently deleted seven years after they were created. User3 leaves the company. You need to ensure that Admin1 and Admin2 can access the mailbox of User3. The solution must meet the technical requirements. What should you do? A.Migrate the mailbox of User3 to a distribution group. B.Migrate the mailbox of User3 to a Microsoft 365 group. C.Convert the mailbox of User3 into a resource mailbox. D.Convert the mailbox of User3 into a shared mailbox. Answer: D Explanation: Fabrikam identifies the following technical requirements: When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2. If you remove the license from User3, the mailbox will be deleted after 30 days. Converting the mailbox to a shared mailbox will ensure that the mailbox is not deleted. You would still need to give Admin1 and Admin2 permissions to access the mailbox. QUESTION 208 Case Study: 3 - Fabrikam, Inc Overview Fabrikam, Inc. is a consulting company that has a main office in Montreal. Fabrikam has a partnership with a company named Litware, Inc. Existing Environment Network Environment The on-premises network of Fabrikam contains an Active Directory domain named fabrikam.com. Fabrikam has a Microsoft 365 tenant named fabrikam.com. All users have Microsoft 365 Enterprise E5 licenses. User accounts sync between Active Directory Domain Services (AD DS) and the Microsoft 365 tenant. Fabrikam.com contains the users and devices shown in the following table. Fabrikam currently leases mobile devices from several mobile operators. Microsoft Exchange Online Environment All users are assigned an Outlook Web App policy named FilesPolicy. In-Place Archiving is disabled for Exchange Online. You have the users shown in the following table. User1 and User3 use Microsoft Outlook for iOS and Android to access email from their mobile device. User2 uses a native Android email app. A Safe Links policy in Microsoft Defender for Office 365 is applied to the fabrikam.com tenant. The marketing department uses a mail-enabled public folder named FabrikamProject. Default MRM Policy is disabled for the fabrikam.com tenant. Problem Statements Fabrikam identifies the following issues: Users report that they receive phishing emails containing embedded links. Users download and save ASPX files when they use Outlook on the web. Email between Fabrikam and Litware is unencrypted during transit. User2 reports that he lost his mobile device. Requirements Planned Changes Fabrikam plans to implement the following changes: Configure FilesPolicy to prevent Outlook on the web users from downloading attachments that have the ASPX extension. Purchase a new smartboard and configure the smartboard as a booking resource in Exchange Online. Ensure that the new smartboard can only be booked for a maximum of one hour. Allow only Admin1 to accept or deny booking requests for the new smartboard. Standardize mobile device costs by moving to a single mobile device operator. Migrate the FabrikamProject public folder to Microsoft SharePoint Online. Enable In-Place Archiving for users in the marketing department. Encrypt all email between Fabrikam and Litware. Technical Requirements Fabrikam identifies the following technical requirements: Ensure that the planned Sharepoint site for FabrikamProject only contains content that was created during the last 12 months. Any existing file types that are currently configured as blocked or allowed in the FilesPolicy policy must remain intact. When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2. Generate a report that identifies mobile devices and the mobile device operator of each device. Use the principle of least privilege. Minimize administrative effort. Retention requirements Fabrikam identifies the following retention requirements for all users: Enable users to tag items for deletion after one year. Enable users to tag items for deletion after two years. Enable users to tag items to be archived after one year. Automatically delete items in the Junk Email folder after 30 days. Automatically delete items in the Sent Items folder after 300 days. Ensure that any items without a retention tag are moved to the Archive mailbox two years after they were created and permanently deleted seven years after they were created. You need to identify which users clicked the links in the phishing emails. What should you do? A.Run a message trace and review the results. B.Query the mailbox audit log. C.Use the URL trace reporting feature. D.Review the quarantine mailbox. Answer: C QUESTION 209 Case Study: 3 - Fabrikam, Inc Overview Fabrikam, Inc. is a consulting company that has a main office in Montreal. Fabrikam has a partnership with a company named Litware, Inc. Existing Environment Network Environment The on-premises network of Fabrikam contains an Active Directory domain named fabrikam.com. Fabrikam has a Microsoft 365 tenant named fabrikam.com. All users have Microsoft 365 Enterprise E5 licenses. User accounts sync between Active Directory Domain Services (AD DS) and the Microsoft 365 tenant. Fabrikam.com contains the users and devices shown in the following table. Fabrikam currently leases mobile devices from several mobile operators. Microsoft Exchange Online Environment All users are assigned an Outlook Web App policy named FilesPolicy. In-Place Archiving is disabled for Exchange Online. You have the users shown in the following table. User1 and User3 use Microsoft Outlook for iOS and Android to access email from their mobile device. User2 uses a native Android email app. A Safe Links policy in Microsoft Defender for Office 365 is applied to the fabrikam.com tenant. The marketing department uses a mail-enabled public folder named FabrikamProject. Default MRM Policy is disabled for the fabrikam.com tenant. Problem Statements Fabrikam identifies the following issues: Users report that they receive phishing emails containing embedded links. Users download and save ASPX files when they use Outlook on the web. Email between Fabrikam and Litware is unencrypted during transit. User2 reports that he lost his mobile device. Requirements Planned Changes Fabrikam plans to implement the following changes: Configure FilesPolicy to prevent Outlook on the web users from downloading attachments that have the ASPX extension. Purchase a new smartboard and configure the smartboard as a booking resource in Exchange Online. Ensure that the new smartboard can only be booked for a maximum of one hour. Allow only Admin1 to accept or deny booking requests for the new smartboard. Standardize mobile device costs by moving to a single mobile device operator. Migrate the FabrikamProject public folder to Microsoft SharePoint Online. Enable In-Place Archiving for users in the marketing department. Encrypt all email between Fabrikam and Litware. Technical Requirements Fabrikam identifies the following technical requirements: Ensure that the planned Sharepoint site for FabrikamProject only contains content that was created during the last 12 months. Any existing file types that are currently configured as blocked or allowed in the FilesPolicy policy must remain intact. When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2. Generate a report that identifies mobile devices and the mobile device operator of each device. Use the principle of least privilege. Minimize administrative effort. Retention requirements Fabrikam identifies the following retention requirements for all users: Enable users to tag items for deletion after one year. Enable users to tag items for deletion after two years. Enable users to tag items to be archived after one year. Automatically delete items in the Junk Email folder after 30 days. Automatically delete items in the Sent Items folder after 300 days. Ensure that any items without a retention tag are moved to the Archive mailbox two years after they were created and permanently deleted seven years after they were created. Hotspot Question You need to modify FilesPolicy to prevent users from downloading ASPX files. The solution must meet the technical requirements. How should you complete the command?To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 210 Case Study: 3 - Fabrikam, Inc Overview Fabrikam, Inc. is a consulting company that has a main office in Montreal. Fabrikam has a partnership with a company named Litware, Inc. Existing Environment Network Environment The on-premises network of Fabrikam contains an Active Directory domain named fabrikam.com. Fabrikam has a Microsoft 365 tenant named fabrikam.com. All users have Microsoft 365 Enterprise E5 licenses. User accounts sync between Active Directory Domain Services (AD DS) and the Microsoft 365 tenant. Fabrikam.com contains the users and devices shown in the following table. Fabrikam currently leases mobile devices from several mobile operators. Microsoft Exchange Online Environment All users are assigned an Outlook Web App policy named FilesPolicy. In-Place Archiving is disabled for Exchange Online. You have the users shown in the following table. User1 and User3 use Microsoft Outlook for iOS and Android to access email from their mobile device. User2 uses a native Android email app. A Safe Links policy in Microsoft Defender for Office 365 is applied to the fabrikam.com tenant. The marketing department uses a mail-enabled public folder named FabrikamProject. Default MRM Policy is disabled for the fabrikam.com tenant. Problem Statements Fabrikam identifies the following issues: Users report that they receive phishing emails containing embedded links. Users download and save ASPX files when they use Outlook on the web. Email between Fabrikam and Litware is unencrypted during transit. User2 reports that he lost his mobile device. Requirements Planned Changes Fabrikam plans to implement the following changes: Configure FilesPolicy to prevent Outlook on the web users from downloading attachments that have the ASPX extension. Purchase a new smartboard and configure the smartboard as a booking resource in Exchange Online. Ensure that the new smartboard can only be booked for a maximum of one hour. Allow only Admin1 to accept or deny booking requests for the new smartboard. Standardize mobile device costs by moving to a single mobile device operator. Migrate the FabrikamProject public folder to Microsoft SharePoint Online. Enable In-Place Archiving for users in the marketing department. Encrypt all email between Fabrikam and Litware. Technical Requirements Fabrikam identifies the following technical requirements: Ensure that the planned Sharepoint site for FabrikamProject only contains content that was created during the last 12 months. Any existing file types that are currently configured as blocked or allowed in the FilesPolicy policy must remain intact. When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2. Generate a report that identifies mobile devices and the mobile device operator of each device. Use the principle of least privilege. Minimize administrative effort. Retention requirements Fabrikam identifies the following retention requirements for all users: Enable users to tag items for deletion after one year. Enable users to tag items for deletion after two years. Enable users to tag items to be archived after one year. Automatically delete items in the Junk Email folder after 30 days. Automatically delete items in the Sent Items folder after 300 days. Ensure that any items without a retention tag are moved to the Archive mailbox two years after they were created and permanently deleted seven years after they were created. Hotspot Question You need to configure the new smartboard to support the planned changes. Which three settings should you configure?To answer, select the appropriate settings in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 211 Case Study: 3 - Fabrikam, Inc Overview Fabrikam, Inc. is a consulting company that has a main office in Montreal. Fabrikam has a partnership with a company named Litware, Inc. Existing Environment Network Environment The on-premises network of Fabrikam contains an Active Directory domain named fabrikam.com. Fabrikam has a Microsoft 365 tenant named fabrikam.com. All users have Microsoft 365 Enterprise E5 licenses. User accounts sync between Active Directory Domain Services (AD DS) and the Microsoft 365 tenant. Fabrikam.com contains the users and devices shown in the following table. Fabrikam currently leases mobile devices from several mobile operators. Microsoft Exchange Online Environment All users are assigned an Outlook Web App policy named FilesPolicy. In-Place Archiving is disabled for Exchange Online. You have the users shown in the following table. User1 and User3 use Microsoft Outlook for iOS and Android to access email from their mobile device. User2 uses a native Android email app. A Safe Links policy in Microsoft Defender for Office 365 is applied to the fabrikam.com tenant. The marketing department uses a mail-enabled public folder named FabrikamProject. Default MRM Policy is disabled for the fabrikam.com tenant. Problem Statements Fabrikam identifies the following issues: Users report that they receive phishing emails containing embedded links. Users download and save ASPX files when they use Outlook on the web. Email between Fabrikam and Litware is unencrypted during transit. User2 reports that he lost his mobile device. Requirements Planned Changes Fabrikam plans to implement the following changes: Configure FilesPolicy to prevent Outlook on the web users from downloading attachments that have the ASPX extension. Purchase a new smartboard and configure the smartboard as a booking resource in Exchange Online. Ensure that the new smartboard can only be booked for a maximum of one hour. Allow only Admin1 to accept or deny booking requests for the new smartboard. Standardize mobile device costs by moving to a single mobile device operator. Migrate the FabrikamProject public folder to Microsoft SharePoint Online. Enable In-Place Archiving for users in the marketing department. Encrypt all email between Fabrikam and Litware. Technical Requirements Fabrikam identifies the following technical requirements: Ensure that the planned Sharepoint site for FabrikamProject only contains content that was created during the last 12 months. Any existing file types that are currently configured as blocked or allowed in the FilesPolicy policy must remain intact. When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2. Generate a report that identifies mobile devices and the mobile device operator of each device. Use the principle of least privilege. Minimize administrative effort. Retention requirements Fabrikam identifies the following retention requirements for all users: Enable users to tag items for deletion after one year. Enable users to tag items for deletion after two years. Enable users to tag items to be archived after one year. Automatically delete items in the Junk Email folder after 30 days. Automatically delete items in the Sent Items folder after 300 days. Ensure that any items without a retention tag are moved to the Archive mailbox two years after they were created and permanently deleted seven years after they were created. Hotspot Question You need to perform a remote wipe of the devices of User2 and User3. You run the following commands. Clear-MobileDevice -id User2-Device -NotificationEmailAddress "admin@Fabrikam.com" Clear-MobileDevice -id User3-Device -NotificationEmailAddress "admin@Fabrikam.com" What occurs on each device?To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 212 You have a Microsoft Exchange Online tenant that contains the groups shown in the following table. Which groups can you upgrade to a Microsoft 365 group? A.Group1 only B.Group1, Group2, Group3, and Group4 C.Group2 and Group3 only D.Group3 only E.Group1 and Group4 only Answer: AE QUESTION 213 You have a Microsoft Exchange Server 2019 organization. Users access their email by using Microsoft Outlook 2019. The users report that when a mailbox is provisioned for a new user, there is a delay of many hours before the new user appears in the global address list (GAL). From Outlook on the web, the users can see the new user in the GAL immediately. You need to reduce the amount of time it takes for new users to appear in the GAL in Outlook 2019. What should you do? A.Create a scheduled task that runs the Update-GlobalAddressList cmdlet. B.Create an address book policy (ABP). C.Modify the default email address policy. D.Modify the offline address book (OAB) schedule. Answer: D QUESTION 214 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com. You need to prevent all users from performing the following tasks: - Sending out-of-office replies to an email domain named fabrikam.com. - Sending automatic replies to an email domain named adatum.com. The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet. Solution: You create one mail flow rule. Does this meet the goal? A.Yes B.No Answer: B QUESTION 215 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com. You need to prevent all users from performing the following tasks: - Sending out-of-office replies to an email domain named fabrikam.com. - Sending automatic replies to an email domain named adatum.com. The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet. Solution: You create two new remote domains. Does this meet the goal? A.Yes B.No Answer: A QUESTION 216 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com. You need to prevent all users from performing the following tasks: - Sending out-of-office replies to an email domain named fabrikam.com. - Sending automatic replies to an email domain named adatum.com. The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet. Solution: You modify the default remote domain. Does this meet the goal? A.Yes B.No Answer: B QUESTION 217 You have a Microsoft Exchange Online tenant that uses a third-party email gateway device. You discover that inbound email messages are delayed. The gateway device receives the following error message when sending email to the tenant. 4.7.500 Server busy, please try again later. You need to prevent inbound email delays. What should you configure? A.Organization Sharing B.an MX record for the domain C.a transport rule D.a connector Answer: D QUESTION 218 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that contains the following email domains: - Adatum.com - Contoso.com - Fabrikam.com When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain. You need to ensure that the users send email by using the @fabrikam.com email domain. Solution: You modify the properties of the fabrikam.com accepted domain. Does this meet the goal? A.No B.Yes Answer: A QUESTION 219 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that contains the following email domains: - Adatum.com - Contoso.com - Fabrikam.com When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain. You need to ensure that the users send email by using the @fabrikam.com email domain. Solution: From the Microsoft 365 portal, you set fabrikam.com as the default domain. Does this meet the goal? A.No B.Yes Answer: B QUESTION 220 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that contains the following email domains: - Adatum.com - Contoso.com - Fabrikam.com When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain. You need to ensure that the users send email by using the @fabrikam.com email domain. Solution: You create an email address policy. Does this meet the goal? A.No B.Yes Answer: A Explanation: This would work in Exchange on-premise but you cannot create email address policies for user mailboxes in Exchange Online. QUESTION 221 Your company has a Microsoft Exchange Server 2019 hybrid deployment. The company has a finance department. You need to move all the on-premises mailboxes of the finance department to Exchange Online. The bulk of the move operation must occur during a weekend when the company's Internet traffic is lowest. The move must then be finalized the following Monday. The solution must minimize disruption to end users. What should you do first? A.Schedule a task that runs the New-MoveRequest cmdlet and specifies the Remote parameter. B.Run the New-MigrationBatch cmdlet and specify the MoveOptions parameter. C.Run the New-MigrationBatch cmdlet and specify the CompleteAfter parameter. D.Create a script that moves most of the mailboxes on Friday at 22:00 and the remaining mailboxes on Monday at 09:00. Answer: C QUESTION 222 You have a Microsoft 365 subscription that uses a default domain named contoso.com. Users report that email messages from a domain named fabrikam.com are identified as spam even though the messages are legitimate. You need to prevent messages from fabrikam.com from being identified as spam. What should you do? A.Enable the Zero-hour auto purge (ZAP) email protection feature. B.Enable the safe list on a connection filter. C.Edit the default mail flow rule to bypass the spam filter. D.Modify the IP Allow list of a connection filter policy. Answer: D QUESTION 223 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Server 2019 hybrid deployment. All user mailboxes are hosted in Microsoft 365. All outbound SMTP email is routed through the on-premises Exchange organization. A corporate security policy requires that you must prevent credit card numbers from being sent to internet recipients by using email. You need to configure the deployment to meet the security policy requirement. Solution: From Microsoft 365, you create a supervision policy. Does this meet the goal? A.Yes B.No Answer: B Explanation: You should create a Data Loss Prevention (DLP) policy. QUESTION 224 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that contains 1,000 mailboxes. All the users in the sales department at your company are in a group named Sales. The company is implementing a new policy to restrict the use of email attachments for the users in the Sales group. You need to prevent all email messages that contain attachments from being delivered to the users in the Sales group. Solution: You create a mail flow rule. Does this meet the goal? A.Yes B.No Answer: A QUESTION 225 You have a Microsoft Exchange Server 2019 organization. You need to ensure that a user named User1 can prevent mailbox content from being deleted if the content contains the words Fabrikam and Confidential. What should you do? A.Assign the Legal Hold and Mailbox Import Export management roles to User1. B.Assign the Mailbox Search and Mailbox Import Export management roles to User1. C.Add User1 to the Security Administrator role group. D.Assign the Mailbox Search and Legal Hold management roles to User1. Answer: AB 2021 Latest Braindump2go MS-203 PDF and MS-203 VCE Dumps Free Share: https://drive.google.com/drive/folders/12SiwmGjZIvvhv_i27uRu4wZaSJ2j694M?usp=sharing
What If We Taught Students That Religion is Absurd?
We need to educate our children and teenagers to the point where they can think critically for themselves and can easily see and understand the absurdity of religion. The good news is that once someone’s brain is at this level of comprehension, a great many positive side effects occur. Life would be much better for everyone if everyone in our society is educated to the level where they understand that religion is absurd. The religiosity of America fascinates me. I am intrigued by the idea of millions of people in an advanced nation believing that they have a “relationship” with an imaginary friend and believing that this imaginary friend is answering their prayers.  In the United States, something like 76% of the population believes in God, and seventy percent of the population identifies as Christian. Three-quarters of the U.S. population believes that the Bible was at least inspired by God, and 28% (more than 89 million people) believe the stories in it are literally true. Why would anyone today believe that the Christian god is real or that the story of Noah’s ark is true? My goal here is to advocate that we, as a society, start an active campaign to make religion irrelevant to human civilization. In the same way that there have been active campaigns to eliminate diseases like smallpox and polio, we should start a similar campaign against religion.  The tool I propose for religion’s elimination is across-the-board education in critical thinking. But first, let’s step back for a moment and ask, How do we find ourselves in this position as a species? There are many interesting things that human beings do. Music, math, tools, cooking, science, engineering, art, and language all come to mind. But religion ranks up there as perhaps the most interesting.  Religion stands out because it is so irrational and bizarre. Billions of people on this planet believe in their various imaginary beings so firmly that disagreements about religion often escalate to violence and warfare.  Read the full story: https://www.fadewblogs.eu.org/2021/11/teaching-about-religion-in-school.html  
Jesus: Prophet of Peace and Love or Purveyor of Fear and Hate?
Multitudes of Christian commentators over the past two millennia have proclaimed the teachings of Jesus of Nazareth to be unsurpassed tenets of spiritual wisdom and unexcelled guidelines for living a morally responsible life.  Hundreds of millions of devout believers are absolutely convinced that they will conquer death and attain everlasting life because God sacrificed his son for their sins. They are also convinced that Jesus didn’t really die. He was restored to life and subsequently ascended to heaven to spend eternity with his father, and soon Jesus will return to Earth to judge the wicked and rapture righteous believers up to heaven with him. Countless books have been written extolling the allegedly commendable features of the “Christian worldview” and the “Christ-centered life,” but, by contrast, few authors have examined the unsavory side of Jesus’ personality and his less than-meritorious behavior and opinions. For this presentation, I’ve formulated, in a balanced fashion, two sets of ten principles based on Jesus’ pronouncements. Although his directives come from the canonical gospels (the books of Matthew, Mark, Luke, and John), additional documentation is abundant elsewhere in the New Testament epistles and letters. The twenty precepts are listed along with the supporting Bible verses from which they derive. The cited verses and passages appear in this separate article. This scriptural evidence will enable readers to answer for themselves the binary question that is the title of this article. NB: This article is not made assuming Jesus literally indeed existed, but an evaluation of the character of the Abrahamic religious texts. Read the full article:https://www.fadewblogs.eu.org/2021/11/jesus-prophet-of-love-or-hate.html
Dimpleplasty - Get Dimples With A Quick And Easy Procedure
Cher, Mario Lopez, and Jennifer Garner are all famous for their dimpled smiles. They recently inspired fans to get their own dimples. “Everyone in Hollywood has them, and everyone wants them,” say plastic surgeons. Men who want the “Mario Lopez” look are also interested in the procedure. So, what is Dimpleplasty? Natural dimples are caused by skin adhering to underlying tissue. If someone smiles, a dimple appears. While some dimples last into adulthood, many disappear as a child grows and the cheek muscle matures. The latest cosmetic surgery trend is Dimpleplasty in Mumbai. Cosmetic surgeons now create four times as many dimples as they did a few years ago. What is Dimpleplasty? A tiny incision inside the patient's cheek creates dimples. No cuts on the outside of the face. The remaining cheek muscle is sutured to the skin's underside with dissolvable suture. An incision on the inside of the cheek creates a dimple. One local anaesthetic is used for the entire outpatient procedure. The dimples will be deeper at first, but will look natural after a few months. Initially visible whenever the patient smiles, the dimples gradually fade away. What is the Dolly Dimple? Dr. Siddharth Prakash, one of the few cosmetic surgeons who offers the service, says the “Dolly Dimple” is an updated version of the original dimple creation surgery in Mumbai that is more predictable. "Dimples can be more personalised," said Dr. Siddharth. “Patients can design their own dimples, long, short, deep, shallow, etc.” The patient can also choose the location of the dimples on their cheeks. Dimples are cute and brighten a person's smile. They are even lucky in some cultures.
How To Pick The Best Plastic Surgeon For Your Rhinoplasty
Recent advancements in cosmetic surgery have allowed surgeons to achieve more natural, aesthetically pleasing, and elegant results. But no amount of advanced technology or surgical techniques can replace a skilled facial plastic surgeon's artistic eye and skill. Simply put, not all surgeons are equal. This is especially true of Rhinoplasty (also known as a "nose job"). The nose, along with the eyes and smile, is one of the most noticeable facial features. While you want a surgeon who will perform a safe procedure with minimal recovery time, you also want a surgeon who has the experience, artistic ability, and knowledge of nose anatomy to produce a stunning result. However, some surgeons lack the training and experience required to perform exceptional facial surgery. It is better to find out well before surgery! Before choosing a surgeon for your Rhinoplasty in Mumbai, do your homework well. Find out about the procedure and the surgeon from those who have had a successful Nose Job. Check reviews and inquire. Your experience will suffer if you are afraid to ask questions or communicate clearly. Before selecting a surgeon for your Rhinoplasty, consider asking her/ him the following: What are your qualifications? You can usually look up a surgeon's education, training, and board certifications online. A lack of a website by your plastic surgeon may be a red flag. Choose a Board certified surgeon. These surgeons have undergone extensive specialised training and are truly dedicated to facial plastic surgery. The number of rhinoplasties performed? A good surgeon will have performed hundreds, if not thousands, of these procedures over the course of his career. Like anything else, practise makes perfect. Choose a surgeon with the "numbers" to develop advanced technique and expertise. Please share your before and after photos? This is a fair and common request. Verify that your surgeon's photos are of actual patients, not stock photos. This will help you understand the surgeon's skills. Please show me some happy Rhinoplasty patients' testimonials? Reputable surgeons should be able to easily produce patient testimonials and before and after photos. If a surgeon refuses to provide these, he may simply lack them. Can you make my nose look like a famous person's? If you have a celebrity "nose crush," ask the surgeon if you can have your nose shaped like theirs. Be wary of a surgeon who claims to be able to duplicate another's nose. It may not be possible or desirable to give you an exact copy unless your nose and face share the same shape and bone structure. Responsable nose surgeons will work with you to develop a plan that meets your needs while remaining realistic. What is the procedure's cost? The cost of Rhinoplasty in Mumbai should be fairly consistent if you choose surgeons with similar levels of expertise. If a surgeon quotes you a price significantly lower than others, proceed with caution. You get what you pay for in life, and a Rhinoplasty is not something you want to skimp on. While a new, well-done nose can boost patients' confidence, a new, poorly done nose can do the opposite. Remember that paying another surgeon to fix it later isn't saving you any money.
201-450-deutsch Prüfung, 201-450-deutsch Fragen und antworten
LPI 201-450-deutsch Prüfung, 201-450-deutsch Fragen und antworten LPIC-2 Exam 201, Part 1 of 2, version 4.5 www.it-pruefungen.ch Die Fragen und antworten bei www.it-pruefungen.ch stammen aus den wahren Originalfragen im Testcenter, und werden von unserem professionellen Team zusammenfasst und dann werden von den erfahrenen IT Zertifizierungsdozenten im Testcenter korrekturgelesen, wir garantieren die fachliche Qualität zu den 201-450-deutsch Fragen und antworten . Lpi LPIC Level2 201-450 Prüfungsfragen Prüfungsunterlagen Info zu dieser Prüfungsvorbereitung 201-450 Prüfungsnummer:201-450 Prüfungsname:LPIC-2 Exam 201, Part 1 of 2, version 4.5 Anzahl:161 Prüfungsfragen mit Lösungen Alle Fragen&Antworten werden gut ausgearbeitet. Sie enthalten mehr als 98%ige Fragen der LPIC-2 Exam 201, Part 1 of 2, version 4.5 Zertifizierungsprüfung. Sie brauchen nur diese Fragen&Antworten zu lernen, dann können Sie die Prüfung bei der ersten Probe bestimmt bestehen. www.it-pruefungen.ch verspricht Ihnen, die vollen Gebühren zurückzugeben, gestützt auf die Leistungsliste mit Siegel vom PROMETRIC oder VUE Testcenter, falls Sie bei erster Probe durchgefallen sind. Wir versprechen, dass Ihre Interessen nicht verletzt werden. Wir bieten den Kunden perfekte Dienstleistung und Follow-up-Service nach dem Einkauf unseren 201-450-deutsch Prüfungsfragen. Wenn Sie unsere Fragen&Antworten für ein Jahr einkaufen haben, können Sie kostenlose Aktualisierung für der 201-450-deutsch Fragen genießen. Währenddessen werden wir die entsprechenden Fragen&Antworten sofort aktualisieren, wenn Testcenter 201-450-deutsch Fragen verändert. SIe können kostenlos herunterladen. 201-450-deutsch (LPIC-2 Exam 201, Part 1 of 2, version 4.5) gehört zu LPI Zertifizierungsprüfungen. Wenn Sie LPI Zertifkat erzielen möchten, sollen Sie sich vielleicht an anderen einschlägigen Prüfungen beteiligen. Weiterführende Informationen über 201-450-deutsch Zertifizierung können Sie bei LPI Zerfizitierungsfragen besuchen. Dort können Sie sich über alle Prüfungsfragen der einschlägigen LPI Zertifizierungsprüfungen informieren.
Why SharePoint Development is Important?
SharePoint is a powerful document management and tracking tool that allows authorized users to collaborate and edit documents. It offers file versioning, indexing, and corporate document access control. It is also compatible with third-party applications and can be accessed from any device with an active Internet connection. Another great advantage of SharePoint is that it can be accessed from anywhere using a web browser. Furthermore, it allows for online signatures and is easy to use on mobile devices: Companies can set up departments and use SharePoint to manage and share information across multiple offices. SharePoint also gives developers the ability to integrate custom applications with the platform. This allows administrators to maintain control of the entire platform. Its highly customizable features also enable users to brand their workspace and customize the experience for team members. Advantages of SharePoint Ultimately, SharePoint is a highly effective tool for managing and organizing information, helping employees and managers find answers and insights that improve productivity. Once implemented, the platform is easy to use for all users and allows for flexible configuration. SharePoint is a powerful document management and collaboration system. With this tool, employees can synchronize their efforts and access the latest information. It allows for groups to create centralized document sharing spaces and password-protected spaces. Its flexibility makes it the perfect tool for enterprises that want to streamline their processes. Its ability to customize documents, integrate them with existing software, and manage a variety of users is a huge benefits of SharePoint. SharePoint is a powerful tool for businesses, as it is designed to protect sensitive corporate data. Its central security templates help IT manage and maintain the security of information stored on SharePoint. Cloud Based Backup Solutions SharePoint provides robust data encryption and has a secure cloud backup option that cuts down on the cost of data storage. It also enables businesses to use cloud-based backup solutions and supports secure collaboration. And because it is cloud-based, it can be customized according to the needs of the business. As an intranet tool, SharePoint allows users to customize workflows and customize permissions. By allowing users to set specific permissions for documents and sites, SharePoint improves the security of business data. Application and Services As a part of the Microsoft Office suite, SharePoint can integrate with other applications and services, allowing users to share files across different locations and operating systems. The enterprise search function of SharePoint is one of the most powerful features, connecting employees with expertise. Its social networking features make it a perfect tool for social and corporate intranets. The enterprise management function allows administrators to update security settings, assign permission levels and restore data, all in a single place. Moreover, SharePoint enables companies to manage the security of their information. Its built-in advanced administrative controls and advanced features enable IT professionals to control access to documents and ensure that information is not misused. Also, read about cloud deployment models in this post. For instance, teams and departments can create shared workspaces, ensuring that the right information is available to all. Aside from improving collaboration, SharePoint also helps organizations keep the information they need safe and secure. In addition to this, it enables them to make informed decisions. Benefits It allows for users to access the information in any location, including mobile devices. In addition to its many benefits, it also allows organizations to reduce their overall costs. This technology is a great choice for businesses looking to improve their business's productivity. Its advantages include ease of use, flexibility, and security. SharePoint has many advantages. Its user interface is easy to use and offers an intuitive user experience. Unlike some other platforms, SharePoint is integrated with Microsoft Office Suite. It is also compatible with Microsoft Dynamics CRM, Salesforce, and Exchange Server. By using SharePoint, users can collaborate with other members of their company. A powerful solution, SharePoint is compatible with all major file formats and is designed to integrate with various applications. If you're looking for an advanced version of this technology, it's worth exploring its features. Final Words With its advanced security functions, SharePoint makes it possible to connect various systems. It is a great choice for businesses that want to reduce interruptions and ensure the integrity of their information. Further, it offers the best in-depth support for SharePoint, including migration and new updates. And it is a great choice for small businesses. These features allow employees to focus on other tasks, while still being productive in their daily work. And because it is easy to use, many businesses prefer this application over other alternatives.
7 Ways to Select the Perfect Home Decor for Your House
Choose interior designs that reflect your personality. While designing your space, you must first consider ideas that put forward a version of you. Don’t know how it goes? Well, if you’re outgoing and fun, choose a vibrant color palette with beautiful wall decor that enhances the look. If you are a more serious and sophisticated person, choose a neutral palette and bring it to life with classy mirrors and opulent interiors. But before you start spending a penny on your interiors, you must take time to find out you’re decorating and design style. Understanding the interior style that matches your aura helps you decorate your home with confidence and charm, making every corner unique. From choosing flower vases online to wall decorations and furniture, every piece must be ecstatic and exquisite. No more wasting your money on things that end up feeling wrong after you get them home! So here are 7 ways to select the perfect home decor for your house. Scroll ahead to discover more. Choose a color palette thoughtfully Select a color palette that reflects a better version of you. It should portray you with colors that best define your personality. Every piece in the room must be compiled in a way that all the colors complement each other well. For a person who likes to go minimal, a palette full of neutrals, white and beige would be best. But for someone who’s always a little extravagant, a colorful palette would be great. From fabrics and materials to patterns, choose the little details thoughtfully so that you not just put together a room, but a story in itself. Put comfort first Be it furniture or home decor items, you must always put comfort first. Any piece that you put in your space must have an aspirational as well as functional value. What’s better than home decor that looks stunning and adds value to your room? If you are refurbishing your living room, a round accent table in the middle of the room would not only look striking and sophisticated but will also add functional value to the room. Be it your books, candles, flower vases, etc. A round accent table would be perfect to keep them. If you wish to buy a round accent table, you can check out our Brooklyn Two-Tier Oval Accent Table and The Yin-Yang Coffee Table. Don’t forget the walls Any household with blank and dull walls can never have interiors that stand out. One must always keep in mind that the largest canvas in a room is your walls. Be it the paint or canvas art, you must style your walls in a way that they don’t look sidelined. You can style your walls with mirrors that make them dazzle with elegance and class. Imagine a beige-colored wall decorated with wall decorations like mirrors and furniture that blend well with the aesthetics. Wouldn’t it look jaw-dropping gorgeous? It would look like a room that inspires you every day to make the best out of your life! Pay attention to details To put together an appealing room decor, you must pay attention to the details. You should club together pieces ranging in different sizes and shapes, each of them complementing the other. For example, you can style a wall full of a canvas art gallery, opposite to the wall with a contemporary design wall clock. Complement the round accent table with a beautiful vase and let it make a statement. Buying a flower vase online can be a bit of a task. Don’t worry about the quality, delivery, prices, etc. You can buy a flower vase online from Dekor Company. Don’t follow the symmetry Your home should be a fun combination of patterns, shapes, colors and styles to keep it playful and experimental. When you follow a certain kind of symmetry in interiors, it makes the vibe boring. While it should not be an unlikely and absurd combination but diversity that unifies. It should make the room look like an entire story where your eyes hop from one design to another. This can be done using eye-catchy wall decorations with a unique round accent table and canvas art, where your room will be a blend of different aesthetics. Select top-notch furniture The most important part of aesthetics is furniture. Your furniture must be top-notch. It must speak opulence. The designs and colors that you choose must blend well with your colour palette and make the room look luxurious. While choosing furniture smartly, keep in mind that you need to select things that look amazing and also add functional value to the room. Choose a brand you trust When you bring home splendid home decor items, choose a brand you trust. Choose a trusted name that promises uncompromised magnificence at unbeatable prices. Dekor Company, a brand with years of expertise in providing impeccable interiors is a name you can rely on. If you wish to buy a flower vase online, or furniture like round accent tables, or wall decorations, Dekor Company is your go-to brand. Your dream to design stunning home interiors comes true with Dekor Company. And now that you know how you can discover striking picks for your room, your home becomes the new heaven. These were the 7 easy ways to perfect home decoration. Hope you found this article helpful! Source url- https://www.dekorcompany.com/blogs/news/7-ways-to-select-the-perfect-home-decor-for-your-house
What will be the future for Data Science and Machine Learning?
The field of data science has a promising future ahead and so the importance of data science is emerging. This subject will continue to grow in relevance as firms become more data-centric and as they become more aware of the full significance and potential of the data they collect. Data scientists may make significant contributions to the creation of new goods and services through their analytical abilities. This only serves to increase their significance. There is a huge requirement to learn data science and machine learning as data scientists, data engineers, and data analytics are several career opportunities available that entail working with artificial intelligence. What is Data Science and how does it work? Data Science may be characterized as a multi-disciplinary tool that pulls insights from structured and unstructured data by using scientific techniques, procedures, algorithms, and systems to extract insights from data sources. Data Science is a technical term that refers to the integration of statistics, data analysis, and machine learning in order to comprehend and analyze real occurrences via data. Data Science's Long-Term Future Prospects According to a recent poll conducted by The Hindu, around 97,000 data analytics positions are now available in India owing to a scarcity of qualified candidates. Due to the widespread use of data analytics in practically every business, the number of positions in the field of data science increased by 45 percent in the previous year. E-commerce E-commerce and retail are two of the most important businesses that demand extensive data analysis at the most granular level possible. Because of the successful adoption of data analysis techniques, online retailers will be better able to anticipate consumer purchases, profit margins, and losses, and even influence people into purchasing items by watching their behavior. Manufacturing There are a multitude of reasons why data science is applied in the manufacturing industry. The most common applications of data science in manufacturing are to improve efficiency, reduce risk, and raise profit margins. Following the global financial crisis of 2008, the banking sector has seen unprecedented growth. Banks were among the first organizations to utilize information technology for business operations and security. Healthcare Every day, massive amounts of data are generated through electronic medical records, billing, clinical systems, data from wearables, and a variety of other sources. This creates a significant potential for healthcare practitioners to improve patient care by using actionable insights derived from past patient data. Of course, data science is responsible for making this happen. Transport The transportation business generates massive volumes of data on a regular basis, which is unparalleled. Ticketing and fare collecting systems, as well as scheduling and asset management systems, are used to gather the majority of the data in the sector. It is possible to get unparalleled insights into the development and management of transportation networks via the use of data science techniques. Job Positions in the Data Science Consider the following examples of Data Science employment positions that are now available. Jobs in data science for new graduates may include positions such as business analyst, data scientist, statistician, or data architect, among others. ● Big Data Engineer: Big data engineers are responsible for the development, maintenance, testing, and evaluation of big data solutions in businesses. ● Machine Learning Engineer: Machine learning engineers are responsible for the design and implementation of machine learning applications and algorithms in order to answer business difficulties. ● Data Scientist: Data scientists must be familiar with business difficulties and be able to provide the most appropriate solutions via data analysis and data processing. ● Statistician: The statistician analyses the findings and makes strategic suggestions or incisive forecasts based on the data visualization tools or reports that are generated. ● Analysts of data: Data analysts are engaged in the modification of data and the display of data. ● Business Analysts: Business analysts utilize predictive, prescriptive, and descriptive analytics to translate complicated data into actionable insights that are readily understood by their clients and colleagues. What role does Data Science have in shaping students' future career choices? As soon as they finish their upper secondary school, students find themselves at a fork in the road with several options. A considerable proportion of people who decide to pursue a career in science and technology do so via engineering programs at their respective universities. Engineering students often wonder whether they should pursue conventional engineering courses or if they should pursue one of the more recent engineering streams. Is it worthwhile to enroll in a Data Science course or not? What is the scope of Data Science and Machine Learning? In order to respond to this question, we provide the following responses: In fact, studying Data Science and analytics is worthwhile since there is a sky-high need for Data science workers in every area, and the demand will be too great to satisfy by 2025 if a sufficient number of Data science professionals do not enter the field. To be sure, it is possible if you believe you have an analytical bent of mind, a problem-solving approach, and the endurance to deal with large data sets. The demand is only going to increase in the future. By 2025, there will be a significant imbalance between the demand for qualified professionals and the supply of qualified experts. The IoT Academy is one such stage where you can find out about Data Science, Machine Learning, and IoT exhaustively. With devoted coaches at work, you can improve on the complicated cycles and try for a productive profession in those spaces. #Data science #Machine Learning #IoT
I Said No to a Religious Friend as She Lay Dying. Was I Right?
Religion is nothing but a crock used by people to fortify themselves against the frightening prospect of death, that chillingly inevitable end of life.  And when death impends, be that at war, in hospital, or on death row, people cling more desperately to that delusion.  Even nonbelievers walk on eggshells when faced with a dying person. We wonder: Is this really a good time to tread on their sensibilities and disabuse them of their crock? Not long ago I found myself in that quandary.  Someone I knew was dying, and I went to her deathbed to pay my respects. She was a woman who respected me as an elder of the Nigerian community in Cleveland.  She was also something of a protégé, having sought my advice repeatedly as she considered the proper advanced-degree path to pursue.  In my days as a scientific educator—when, also, two of my sons were in the university—I had become something of an information resource for my fellow Nigerians on matters like the choice of college to attend and the discipline of study, and especially how to tap into financial assistance programs available to good students and their parents in the U.S.  I chose to visit her when most of her friends and well-wishers would be at work. I was wary of the perplexed reactions of my fellow Nigerians when it became known that I am an atheist.  My friends told me I would come across much better as an agnostic or a pagan than an out-and-out atheist, for Nigerians are often ranked alongside Americans in sheer religiosity—of the pushy and loud sort.  It’s amazing that the very people whom religion has historically oppressed and denigrated the most (i.e. women, Blacks, colonized people) are the ones who cling to it most tenaciously!  The Nigerian media go so far as to estimate that one in three houses in the cities and townships of the Christian south of the country are used nowadays as churches, chapels, temples, tabernacles, or other places of worship.  “Nigerian atheist” is considered an oxymoron. Those who know I was raised a Catholic—and, to boot, an altar boy able to recite the entire Eucharist liturgy in Latin and English—profess themselves baffled by my apostasy.  Read the full article: https://www.fadewblogs.eu.org/2021/11/I-said-no.html
Perusahaan Konsultan Human Resource IT Terbaik di Jakarta
Diabad 21 ini, era teknologi semakin berkembang dari waktu ke waktu dan sebagian besar sendi kehidupan manusia dikuasai oleh teknologi, termasuk di dalamnya adalah kaum pebisnis yang memiliki perusahaan. Persaingan antar perusahaan pun sangat ketat sekali, terutama perusahaan yang bergerak di bidang IT. Oleh karena itu, Jasa konsultan Human Resource IT untuk perusahaan sangat diperlukan karena profesi tersebut akan sangat membantu kemajuan perusahaan. Apa itu Konsultan Human Resource IT? KonsultanHuman Resource IT adalah bidang yang fokus pada bisnis memberikan saran tentang cara terbaik untuk menggunakan teknologi informasi demi memenuhi tujuan bisnis mereka. Baca Selengkapnya di: https://toghr.com/perusahaan-konsultan-human-resource-it-terbaik-di-jakarta/ Keberadaan seorang Konsultan IT di Indonesia sendiri pun tidak terlihat sebagai suatu profesi yang asing, bahkan terdapat suatu perusahaan jasa konsultan dalam bidang teknologi informasi. Mereka sebagai seorang IT Consultant sangat lah mengetahui teknologi yang berkualitas maupun kurang berkualitas yang baik bagi suatu perusahaan atau klien nya. Untuk menjadi seorang IT Consultant diperlukan suatu kemampuan atau “skill” tersendiri di bidang computer. Mereka pun juga harus dapat memahami kepribadian serta harapan seorang klien. Dalam hal ini, seorang IT Consultant juga harus memiliki kemampuan untuk dapat berkomunikasi dengan baik, karena profesi ini sangat lah berhubungan langsung dengan klien. Tugas dan tanggung jawab yang umum di pegang oleh seorang Konsultan IT diantaranya: Baca Selengkapnya di: https://toghr.com/perusahaan-konsultan-human-resource-it-terbaik-di-jakarta/ Terdapat 5 prinsip sebagai Konsultan IT, yaitu; Baca Selengkapnya di: https://toghr.com/perusahaan-konsultan-human-resource-it-terbaik-di-jakarta/ Keuntungan Memakai Jasa Konsultan Human Resource IT Untuk Perusahaan Anda Perusahaan yang memberikan jasa Konsultan Human Resource IT harus mempunyai keahlian khusus yang berkaitan dengan bidang tertentu. Baca Selengkapnya di: https://toghr.com/perusahaan-konsultan-human-resource-it-terbaik-di-jakarta/ Dengan menggunakan jasa para konsultan IT akan membuat perusahaan berkembang dapat meningkatkan kegiatan produksinya dengan baik. Sehingga mereka dapat melakukan kegiatan pemasaran lebih aktif dan maksimal. Jasa konsultan IT Indonesia membuat proses produksi pada perusahaan menjadi berkembang jauh lebih cepat. Progress perusahaan Anda akan semakin maksimal. Dari sinilah konsultan IT memberikan solusi sehingga kegiatan produksi dapat dilakukan dengan cepat. Jasa Konsultan Human Resource IT juga memiliki tenaga kerja IT ahli yang siap membantu perusahaan Anda. TOG Indonesia Salah Satu Perusahaan Konsultan IT Terbaik di Jakarta TOG Indonesia bertujuan untuk memberikan solusi yang dibutuhkan oleh perusahaan untuk bersaing dalam ekonomi digital saat ini; dimana saat ini sangat diperlukan untuk meninjau dan merevisi proses bisnis perusahaan. Dalam menghadapi tantangan global, TOG Indonesia siap membantu Anda melalui perubahan ini. Sebagai grup perusahaan, TOG Indonesia telah mendukung dan menyediakan pelanggannya solusi terdepan kelas dunia. Memberikan solusi dan layanan yang membantu pelanggan mempercepat pertumbuhan bisnis mereka. Kami percaya bahwa ini akan menciptakan nilai baru yang signifikan bagi pelanggan dan Triple One kami juga. Saat ini, Triple One Group sudah bekerjasama dengan berbagai perusahaan, mulai dari perusahaan menengah hingga besar, perusahaan lokal dan multinasional, baik di pasar Indonesia maupun luar negeri. Sistem ini didukung oleh dukungan dan layanan profesional. Sistem ini juga terus ditingkatkan untuk memenuhi persyaratan industrinya dan juga meningkatkan efisiensi dan efektifitas kebutuhan operasional perusahaan. Sumber: https://toghr.com/perusahaan-konsultan-human-resource-it-terbaik-di-jakarta/
Why Do You Choose a Private Transfer from Rome to Capri?
How is your vacation going on in Italy? Getting the most out of your time with friends and family? Each and everything is perfect if your trip goes well. You’re having fun and unwinding yourself with the near and dear ones. The more you visit the more you explore. You would really like to see the most part of the places Italy is famed for. Maybe you’re at Positano, Ravello, Sorrento, and Naples or could be on the Amalfi Coast. You would like to explore the Capri Island that you’ve been listening to all the time – it’s stunning and magnificent. Well, are you heading to Capri Island? You can take a private transfer from Rome to Capri. Otherwise, you can prefer to hire airport transfer from Naples to Capri Island. No matter whatever the option you wish to go with, your visit to Capri Island with your family will be a memorable one for sure. But, how is it possible? We have the perfect guide for you and will take this opportunity to provide you the chance to do it on the sea!! Still, not convinced? Please check out this blog. Why Choose a Private Transfer to Capri Island? A private transfer from Rome to Capri can be a great option to discover the splendid delights of Capri Island. Upon booking your transfer service, you will be led by highly qualified English speaking skipper who will allow you to get the most out of your experience. Capri Island is one of the picturesque islands in the Gulf of Naples, located just opposite of the Sorrentine Peninsula. Situated just a short distance away from the chaos of the city, the island offers a full package of magical landscapes and beautiful views. However, the panorama of Capri Island is famous all across the world and its nightlife is simply magnificent. This means, visiting this island through airport transfer from Naples to Capri, you will have a great experience but what you could see from a boat it’s completely different. The spectacles you will admire during your excursion to reach Capri Island include different taste and they will leave you with an unforgettable memory at the end of the day. Also, you will have some beautiful photographs of your journey – which will tell the unique story of your boat excursion to access Capri Island. Rest assured that, your private transfer from Rome to Capri will be planned perfectly, including a scheduled pickup from your hotel, airport, port, train station or every other place you may need. You will be provided with a private expert driver and experience the journey with all the comforts. Conclusion – Still, you’re thinking? Or counting how many of your family and friends you have to take? You might’ve got your list and planned your vacation in Capri Island. It’s time to book your airport transfer from Naples to Capri through Napoli Limo Service and we’ll handle all of your transportation needs. Don’t hesitate to contact us today for any special request, if you’ve any! Capri Island with its magnificent landscapes is waiting for you to live them!! Don’t miss this chance for a wonderful Mediterranean Sea experience with Napoli Limo Service!! Please stay connected with us on Facebook, Twitter, and Google Plus social networks.