Dessieslife
100+ Views

[October-2021]New Braindump2go CAS-003 PDF and VCE Dumps[Q801-Q810]

QUESTION 801
Over the last 90 days, many storage services has been exposed in the cloud services environments, and the security team does not have the ability to see is creating these instance. Shadow IT is creating data services and instances faster than the small security team can keep up with them. The Chief information security Officer (CIASO) has asked the security officer (CISO) has asked the security lead architect to architect to recommend solutions to this problem.
Which of the following BEST addresses the problem best address the problem with the least amount of administrative effort?

A.Compile a list of firewall requests and compare than against interesting cloud services.
B.Implement a CASB solution and track cloud service use cases for greater visibility.
C.Implement a user-behavior system to associate user events and cloud service creation events.
D.Capture all log and feed then to a SIEM and then for cloud service events

Answer: C

QUESTION 802
An analyst execute a vulnerability scan against an internet-facing DNS server and receives the following report:
- Vulnerabilities in Kernel-Mode Driver Could Allow Elevation of Privilege
- SSL Medium Strength Cipher Suites Supported
- Vulnerability in DNS Resolution Could Allow Remote Code Execution
- SMB Host SIDs allows Local User Enumeration
Which of the following tools should the analyst use FIRST to validate the most critical vulnerability?

A.Password cracker
B.Port scanner
C.Account enumerator
D.Exploitation framework

Answer: A

QUESTION 803
The Chief information Officer (CIO) wants to establish a non-banding agreement with a third party that outlines the objectives of the mutual arrangement dealing with data transfers between both organizations before establishing a format partnership.
Which of the follow would MOST likely be used?

A.MOU
B.OLA
C.NDA
D.SLA

Answer: A

QUESTION 804
A security analyst is trying to identify the source of a recent data loss incident. The analyst has reviewed all the for the time surrounding the identified all the assets on the network at the time of the data loss.
The analyst suspects the key to finding the source was obfuscated in an application. Which of the following tools should the analyst use NEXT?

A.Software Decomplier
B.Network enurrerator
C.Log reduction and analysis tool
D.Static code analysis

Answer: D

QUESTION 805
Which of the following controls primarily detects abuse of privilege but does not prevent it?

A.Off-boarding
B.Separation of duties
C.Least privilege
D.Job rotation

Answer: A

QUESTION 806
A company provides guest WiFi access to the internet and physically separates the guest network from the company's internal WIFI. Due to a recent incident in which an attacker gained access to the compay's intend WIFI, the company plans to configure WPA2 Enterprise in an EAP- TLS configuration.
Which of the following must be installed on authorized hosts for this new configuration to work properly?

A.Active Directory OPOs
B.PKI certificates
C.Host-based firewall
D.NAC persistent agent

Answer: B

QUESTION 807
The goal of a Chief information Security Officer (CISO) providing up-to-date metrics to a bank's risk committee is to ensure:

A.Budgeting for cybersecurity increases year over year.
B.The committee knows how much work is being done.
C.Business units are responsible for their own mitigation.
D.The bank is aware of the status of cybersecurity risks

Answer: A

QUESTION 808
A cybersecurity engineer analyst a system for vulnerabilities. The tool created an OVAL. Results document as output.
Which of the following would enable the engineer to interpret the results in a human readable form? (Select TWO.)

A.Text editor
B.OOXML editor
C.Event Viewer
D.XML style sheet
E.SCAP tool
F.Debugging utility

Answer: AE

QUESTION 809
A Chief information Security Officer (CISO) is developing corrective-action plans based on the following from a vulnerability scan of internal hosts:
Which of the following MOST appropriate corrective action to document for this finding?

A.The product owner should perform a business impact assessment regarding the ability to implement a WAF.
B.The application developer should use a static code analysis tool to ensure any application code is not vulnerable to buffer overflows.
C.The system administrator should evaluate dependencies and perform upgrade as necessary.
D.The security operations center should develop a custom IDS rule to prevent attacks buffer overflows against this server.

Answer: A

QUESTION 810
The Chief information Security Officer (CISO) of a small locate bank has a compliance requirement that a third-party penetration test of the core banking application must be conducted annually. Which of the following services would fulfill the compliance requirement with the LOWEST resource usage?

A.Black-box testing
B.Gray-box testing
C.Red-team hunting
D.White-box testing
E.Blue-learn exercises

Answer: C
2021 Latest Braindump2go CAS-003 PDF and CAS-003 VCE Dumps Free Share:
Comment
Suggested
Recent
Cards you may also be interested in
Recurring Commission System Review-$30,000 Per Month…
Introduction – Recurring Commission System Review What Is the Recurring Commission System? The Recurring Commission System is a virtually unknown method that has made me over $30,000 in commissions every month for 5 years. It’s a new system that clones the business model that I discovered back in 2018 to earn passive automated commissions from affiliate marketing, which is to promote recurring affiliate programs. It provides you with all the tools to earn recurring commissions promoting products and services that pay us every month. The System helps people get paid month after month with recurring business models. And the best part about this system is that you don’t need any previous experience, technical skills, or budget to start. Get Link: Recurring Commission System Review If you’ve found this page and are still reading… It’s because you still want to make your dream of earning residual revenue come true…I get it! Over 10 years ago, I chased that dream, and it took me three years and thousands of dollars to achieve it. And once I developed a system… I NEVER WORRIED ABOUT MONEY AGAIN! I’ve taken everything I’ve learned and created one done-for-you System, so you don’t have to wait three years…You can start today! You see, I got tired of working hard. That’s why I created the Recurring Commission System. It’s a done-for-you system that pays us monthly recurring commissions from some of the biggest affiliate marketing companies in the world. Just add your affiliate links into the System, use the recurring funnels and sites we’ve set up for you, and you’ll see results within days… not years! But more on that later… Recurring Commission System Review – Recurring Commission System Overview Vendor: Glynn Kosky Product : Recurring Commission System Official Website : Click Here Support: Effective Response Discount: GET THE BEST DISCOUNT HERE Launch Date:  30 Jan 2023   Recommendation: Highly Recommend! Niche: Software Over $30,000+ Per Month In Passive Income Online While everyone else is struggling to promote the same old $7 products that pay low one-time commissions… We’re generating recurring monthly income by promoting subscription-based products that millions of people want and need. Get Link: Recurring Commission System Review Products from companies like these, that have millions of customers across the globe: These products are priced at anything from $27 per month, all the way to thousands of dollars per month. I spend $5,000 a month on products and software for my business. Multiply that by all the businesses in the world. That means an endless opportunity for YOU! Once you get your license and access the Recurring Commission System, it does all the hard work for you. All you do is activate the recurring funnels & site, insert your affiliate links, and the cloud-based software does the rest for you. It’s exciting to see notifications of commissions coming in all day… and night. You’ll tap into products that have enabled me to generate over $30,000 in commissions per month, almost every month, for over 5 years. Why Get Paid Once You Can Get Paid Over and Over? Affiliate marketing is the holy grail. You promote other people’s products and get paid! However, current affiliate marketing methods lack something. When I started, it didn’t work all that great, I had to sell cheap stuff that only paid me small, one-time commissions. I did a lot of work for little money. So, I developed a system that put me into higher-paying products that pay recurring commissions. And once I perfected it, I began crushing any affiliate campaign, offer, and promo! The secret to success was to focus only on recurring products. With the Recurring Commission System, you’ll get all my sites and funnels that I’m using to crush it with recurring commissions! You see, until now, there was only one path to making money online with affiliate marketing…. the OLD Way which focused on “one-time” products… RECURRING COMMISSION SYSTEM FREQUENTLY ASKED QUESTIONS How much does the Recurring Commission System cost? Getting your license to use the Recurring Commission System will cost you a one-time investment of $17 during the launch period. It has everything you need to start getting results and building recurring affiliate commissions. How Technical Is the System? The System is very easy to use and does 99.9% of everything for you. They’ve incorporated drag-and-drop technology. Can you use a keyboard and a mouse and follow simple instructions? That’s as technical as it gets. I don’t know anything about affiliate marketing. Can I do this? They’ve created the Recurring Commission System so that it can run by itself. They use this System to earn over $30K monthly with recurring affiliate commissions. They developed this incredible software and System so anyone new to internet or affiliate marketing can create recurring affiliate commissions without experience, technical skills, or previous knowledge. How can I make money with this? Once you have your license and become a member, I’ll show you how the System works. The Recurring Commission System finds affiliate programs that pay out recurring commissions. As people sign up using your exclusive affiliate link, you get paid for the sale, and every time they renew. Does the System Work On PC And Mac? YES! they made two versions that are compatible with both MAC and PC. Recurring Monthly Payments Is Where The Big Money Is Online… The biggest companies in the world survive on their monthly recurring business models. Let me take a wild guess… I bet you’ve got at least one subscription to some of these companies? And guess what? Someone is earning a commission for getting you to sign up in the first place! The Recurring Commission System puts YOU in the driving seat and lets you do the same, but with affiliate marketing related products! The Recurring Commission System Drives Affiliate Commissions For Us! Once you purchase your license, you’ll discover a new system we use to promote affiliate products that pay us a monthly recurring commission in minutes. Everything is done for you, 100%. It’s ready and waiting for you to turn the key. Are You A Newbie Or Experienced Marketer Looking To Take Your Income To The Next Level? The Recurring Commission System works with affiliate offers that pay monthly recurring commissions. The commissions keep flowing into our accounts automatically, day and night. Even new affiliate marketers earn $1,000, $5,000 and even more than $10,000 in monthly recurring commissions. Get Link: Recurring Commission System Review You are about to transform your financial life and make consistent commissions like these? Do you think this kind of monthly income could change things for you? I Don’t Own A Mansion In The Hollywood Hills Or Drive A Tesla… I’m Just A Regular Guy Who Wants To Help People Like You… You’ll use the same System and have the opportunity to tap into this highly profitable recurring commission system that is making us money. I’m licensing my System to a select few people who see the value in having a steady stream of passive income. No other done-for-you program like this will help you make recurring monthly commissions on affiliate products in one place! It’s making me good money, but my street wasn’t always “paved with gold.” There were very lean times when I started. I Invested And Lost $28,000 Trying To “Earn Money Online” I tried just about every program imaginable. All those systems got me into debt of over $28,000. Get Link: Recurring Commission System Review I tried to make it with a Shopify store, drop shipping, and as an Amazon affiliate. It was a good education but cost the same as a few years of college. What really discouraged me was when people wanted their money back. There are too many other headaches to mention. Ecommerce was too much work and trouble for the meager money that trickled in. I also tried making money with Bitcoin and other cryptocurrencies. I tied up what little money I had and lost it eventually. My credit card debt kept piling up. I Knew There Were Big Commissions Online, But I Couldn’t Figure Out How I was highly frustrated and didn’t know what to do. I knew I didn’t want a “real” job. Then I got lucky. It was 2018, and I received an exclusive invitation. It was for a marketing event in Orlando, Florida, hosted by Russell Brunson and ClickFunnels. I have a great deal of respect for Russell and what he’s created, so I went. During this live, 2-day event, there was a secret speaker. I can’t reveal who he was, but he detailed his strategy to promote recurring affiliate products. He showed many mind-blowing examples and the difference between one-time offers and recurring commissions. For him, it meant an extra $1.4 million in recurring commissions in just 3 years. Get Link: Recurring Commission System Review Taggeda recurring/series registration is characterized by,a regulatory commission,Best affiliate program for recurring income,Best lifetime commission affiliate program,Best recurring commission system,Best recurring commission system for affiliates,cms recurring services,financial review commission,High commission rate affiliate program,Most profitable recurring commission system,Passive income through affiliate marketing,quickbooks recurring payments,recurring commission,Recurring commission structure explained,Recurring Commission System Review,recurring company,recurring payment system design,recurring payment systems,Top recurring commission platforms,Top recurring commission programs,what is recurring commission
2023 Latest Braindump2go 300-730 PDF Dumps(Q45-Q75)
QUESTION 45 Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection? A.single sign-on B.Smart Tunnel C.WebType ACL D.plug-ins Answer: B QUESTION 46 Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page? A.auto-upgrade B.auto-connect C.auto-start D.auto-run Answer: C QUESTION 48 Refer to the exhibit. Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.) A.group-url https://172.16.31.10/General enable B.group-policy General internal C.authentication aaa D.authentication certificate E.group-alias General enable Answer: CE QUESTION 49 Which two statements are true when designing a SSL VPN solution using Cisco AnyConnect? (Choose two.) A.The VPN server must have a self-signed certificate. B.A SSL group pre-shared key must be configured on the server. C.Server side certificate is optional if using AAA for client authentication. D.The VPN IP address pool can overlap with the rest of the LAN networks. E.DTLS can be enabled for better performance. Answer: DE QUESTION 50 An engineer is configuring IPsec VPN and wants to choose an authentication protocol that is reliable and supports ACK and sequence. Which protocol accomplishes this goal? A.IKEv1 B.AES-192 C.ESP D.AES-256 Answer: C QUESTION 51 Refer to the exhibit. What is the problem with the IKEv2 site-to-site VPN tunnel? A.incorrect PSK B.crypto access list mismatch C.incorrect tunnel group D.crypto policy mismatch E.incorrect certificate Answer: B QUESTION 52 Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server? A.use of certificates instead of username and password B.EAP-AnyConnect C.EAP query-identity D.AnyConnect profile Answer: D QUESTION 53 Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings? A.*$SecureMobilityClient$* B.*$AnyConnectClient$* C.*$RemoteAccessVpnClient$* D.*$DfltlkeldentityS* Answer: B QUESTION 54 Refer to the exhibit. Which VPN technology is allowed for users connecting to the Employee tunnel group? A.SSL AnyConnect B.IKEv2 AnyConnect C.crypto map D.clientless Answer: D QUESTION 55 Refer to the exhibit. An engineer is troubleshooting a new GRE over IPsec tunnel. The tunnel is established but the engineer cannot ping from spoke 1 to spoke 2. Which type of traffic is being blocked? A.ESP packets from spoke2 to spoke1 B.ISAKMP packets from spoke2 to spoke1 C.ESP packets from spoke1 to spoke2 D.ISAKMP packets from spoke1 to spoke2 Answer: A QUESTION 56 Which command is used to troubleshoot an IPv6 FlexVPN spoke-to-hub connectivity failure? A.show crypto ikev2 sa B.show crypto isakmp sa C.show crypto gkm D.show crypto identity Answer: A QUESTION 57 In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue? A.Verify the spoke configuration to check if the NHRP redirect is enabled. B.Verify that the spoke receives redirect messages and sends resolution requests. C.Verify the hub configuration to check if the NHRP shortcut is enabled. D.Verify that the tunnel interface is contained within a VRF. Answer: B QUESTION 58 An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur? A.The ISAKMP policy priority values are invalid. B.ESP traffic is being dropped. C.The Phase 1 policy does not match on both devices. D.Tunnel protection is not applied to the DMVPN tunnel. Answer: C QUESTION 59 What are two variables for configuring clientless SSL VPN single sign-on? (Choose two.) A.CSCO_WEBVPN_OTP_PASSWORD B.CSCO_WEBVPN_INTERNAL_PASSWORD C.CSCO_WEBVPN_USERNAME D.CSCO_WEBVPN_RADIUS_USER Answer: BC QUESTION 60 Which two NHRP functions are specific to DMVPN Phase 3 implementation? (Choose two.) A.registration request B.registration reply C.resolution request D.resolution reply E.redirect Answer: DE QUESTION 61 Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue? A.The HostName is incorrect. B.The IP address is incorrect. C.Primary protocol should be SSL. D.UserGroup must match connection profile. Answer: D QUESTION 62 Refer to the exhibit. A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue? A.An authentication failure occurs on the remote peer. B.A certificate fragmentation issue occurs between both sides. C.UDP 4500 traffic from the peer does not reach the router. D.An authentication failure occurs on the router. Answer: C QUESTION 63 Refer to the exhibit. Based on the debug output, which type of mismatch is preventing the VPN from coming up? A.interesting traffic B.lifetime C.preshared key D.PFS Answer: A Explanation: TS unacceptable: The IPsec SA setup has failed due to a mismatch in the policy rule definition between the gateways for the tunnel configuration. Check the local and remote network configuration on both gateways. QUESTION 64 Refer to the exhibit. The IKEv2 site-to-site VPN tunnel between two routers is down. Based on the debug output, which type of mismatch is the problem? A.preshared key B.peer identity C.transform set D.ikev2 proposal Answer: B QUESTION 65 Refer to the exhibit. Which type of mismatch is causing the problem with the IPsec VPN tunnel? A.crypto access list B.Phase 1 policy C.transform set D.preshared key Answer: D QUESTION 66 Refer to the exhibit. What is a result of this configuration? A.Spoke 1 fails the authentication because the authentication methods are incorrect. B.Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2. C.Spoke 2 fails the authentication because the remote authentication method is incorrect. D.Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2. Answer: A QUESTION 67 Which two cryptographic technologies are recommended for use with FlexVPN? (Choose two.) A.SHA (HMAC variant) B.Diffie-Hellman C.DES D.MD5 (HMAC variant) Answer: AB QUESTION 68 Refer to the exhibit. An administrator had the above configuration working with SSL protocol, but as soon as the administrator specified IPsec as the primary protocol, the Cisco AnyConnect client was not able to connect. What is the problem? A.IPsec will not work in conjunction with a group URL. B.The Cisco AnyConnect implementation does not allow the two group URLs to be the same. SSL does allow this. C.If you specify the primary protocol as IPsec, the User Group must be the exact name of the connection profile (tunnel group). D.A new XML profile should be created instead of modifying the existing profile, so that the clients force the update. Answer: C QUESTION 69 Refer to the exhibit. Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA. Which command on the ASA is missing? A.dns-server value 10.1.1.2 B.same-security-traffic permit intra-interface C.same-security-traffic permit inter-interface D.dns-server value 10.1.1.3 Answer: B QUESTION 70 Refer to the exhibit. An SSL client is connecting to an ASA headend. The session fails with the message "Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure? A.phase 9: rpf-check B.phase 5: NAT C.phase 4: ACCESS-LIST D.phase 3: UN-NAT Answer: D QUESTION 71 Which redundancy protocol must be implemented for IPsec stateless failover to work? A.SSO B.GLBP C.HSRP D.VRRP Answer: C QUESTION 72 Which technology works with IPsec stateful failover? A.GLBR B.HSRP C.GRE D.VRRP Answer: B QUESTION 73 What are two functions of ECDH and ECDSA? (Choose two.) A.nonrepudiation B.revocation C.digital signature D.key exchange E.encryption Answer: CD QUESTION 74 What uses an Elliptic Curve key exchange algorithm? A.ECDSA B.ECDHE C.AES-GCM D.SHA Answer: B QUESTION 75 Which two remote access VPN solutions support SSL? (Choose two.) A.FlexVPN B.clientless C.EZVPN D.L2TP E.Cisco AnyConnect Answer: BE 2023 Latest Braindump2go 300-730 PDF and 300-730 VCE Dumps Free Share: https://drive.google.com/drive/folders/1zBS7xcmszvPHlrS_lPaM4uUF1VvomE4a?usp=sharing
What are the roles and responsibilities of a human resource manager in different types of sectors?
Human resource is the field where the practice of managing people is performed. Human resource management is a key department in every organization. HR plays an important role in bringing success to your company. As an HR you will acquire the knowledge of tools and training, administration and talent management. For becoming an HR you need to get a degree in MBA or a diploma course in Human Resource Management. And you can easily complete your HR assignments when you take help from assessment help. They will help you to get your assignments done efficiently and you also get plenty of studying materials. In the following part, you will get to know the responsibilities an HR has to perform while on the job. Recruitment and selection- Recruiting the best candidate for the company is one of the toughest jobs. And the process of selection of new candidates has to be taken place smoothly. As an HR you should possess the confidence to pick out the best candidate among a large number of candidates. Performance management- You will have to keep a check on the candidates on their performance after they get on board. You will have to fill in the candidate’s feedback on their performance. Your duty will also involve planning, monitoring, reviewing and rewarding the employees. My assessment help is a service that helps you at any time regarding the subject. Their services are active 24*7 and they instantly get back to you as soon as you drop the message. You can also make use of their chatbots to clear your doubts and queries. Learning and developments- An HR gets opportunities to learn the changes in the processes, technology and societal or legal shifts. You will guide the employees of the particular organization to reskill and upskill their abilities. The HR department together with the other departments can advise different plans. Succession planning- Succession planning is the procedure of planning contingencies in the case of primary employees if they had to leave the company. It is often based on performance ratings and you will have to select the deserving employee to fill the gap. Building and nurturing this activity will show your management skills. If you find any problem regarding the concepts and terms of Human Resources, the best way to clear this is to get your help from assessment help online. The resources they will provide are error-free and easily available on their website. HR analytics and data management- You will also have to be in charge of your data and analytics. When you maintain your data you can use them in making more informed decisions. HR metrics or HR KPIs are the easiest way to keep track of the data. MBA degree is an expensive course and some students want to get their degree in MBA but cannot afford the studying materials. In such circumstances, you can take assistance from do my assignment cheaply. Their prices are reasonable and even though you pay a minimum amount, they do not compromise on the quality.
EmploMatic Review - Profitable Job Finder Sites (App By Igor Burban)
EmploMatic Review: What Is It? EmploMatic is a cloud-based software that allows you to instantly build money-making Job Finder sites that get free traffic and generate affiliate commission from FIVE income streams. This is your chance to have your very own affiliate site that is 100% DONE FOR YOU and is filled with popular JOBS from the greatest businesses and brands. The websites already have 8.5 million job openings from the biggest corporations in the world, including Amazon, Costco, UPS, Walmart, and THOUSANDS of other well-known organizations. Every hour, new positions are uploaded and the websites are immediately updated. The most popular employment sites serve as the model for the "job search" system. Their top techniques are "stolen" by EmploMatic and developed. Read More: https://www.linkedin.com/pulse/emplomatic-review-profitable-job-finder-sites-app-igor-burban- Get Started In 3 Easy Steps It's Your Fast Lane To 100% Automated JOB SEARCH Sites STEP 1: Choose Which Jobs To Focus On Select which country/region/city or job titles you want to display on your site. Mix & match OR include ALL jobs on your site if you wish. A detailed behind-the-shoulder tutorial is included. STEP 2: Enter Your Affiliate IDs Add your affiliate IDs and all the links automatically become your affiliate links. Don’t have an affiliate account yet? No worries. Inside the dashboard I’ll show you how to instantly get approved for all affiliate programs. STEP 3: Sit Back and Let Your Site Earn Affiliate Commission Every time somebody comes to your site and clicks on ANY job result, you get paid. Plus, you get to profit from banner ads through affiliate sales. AND you earn commission from text ads when people click and fill out a simple form. They don’t even have to buy anything! Read More: https://www.linkedin.com/pulse/emplomatic-review-profitable-job-finder-sites-app-igor-burban-
2023 Latest Braindump2go 400-007 PDF Dumps(Q83-Q120)
QUESTION 83 Which statement about hot-potato routing architecture design is true? A.Hot-potato routing is the preferred architecture when connecting to content providers B.Hop-potato keeps traffic under the control of the network administrator for longer C.OSPF uses hot-potato routing if all ASBRs use the same value for the external metric D.Hot-potato routing is prone to misconfiguration as well as poor coordination between two networks Answer: A QUESTION 84 Two enterprise networks must be connected together. Both networks are using the same private IP addresses. The client requests from both sides should be translated using hide NAT (dynamic NAT) with the overload feature to save IF addresses from the NAT pools. Which design addresses this requirement using only one Cisco I OS NAT router for both directions? A.This is not possible, because two Cisco IOS NAT routers are required to do dynamic NAT, with overload in both directions. B.The ip nat inside and ip nat outside commands must be configured at the interfaces with the overload option in both directions. C.The overload feature is the default and does not have to be configured. D.Two different NAT pools must be used for the ip nat inside source and the ip nat outside source commands for the overload feature in both directions. E.The Nat Virtual interface must be used to achieve this requirement. Answer: D QUESTION 85 Refer to the exhibit. As part of a redesign project, you must predict multicast behavior. What happens to the multicast traffic received on the shared tree (*,G), if it is received on the LHR interface indicated*? A.It is dropped due to an unsuccessful RPF check against the multicast source B.It is switched give that no RPF check is performed C.It is switched due to a successful RPF check against the routing table D.It is dropped due to an unsuccessful RPk8t8ck against the multicast receiver. Answer: A QUESTION 86 A BGP route reflector in the network is taking longer than expected to coverage during large network changes. Troubleshooting shows that the router cannot handle all the TCP acknowledgements during route updates. Which action can be performed to tune the device performance? A.Increase the size of the hold queue. B.Increase the size of the large buffers. C.Decrease the size of the small buffers. D.Increase the keepalive timers for each BGP neighbor. Answer: A QUESTION 87 Which two application requirements are mandatory tor traffic to receive proper treatment when placed in the priority queue? (Choose two.) A.small transactions (HTTP-like behavior) B.WRED drop treatment C.tolerance to packet loss D.intolerance to jitter E.TCP-based application Answer: CD QUESTION 88 Which two conditions must be met for EIGRP to maintain an alternate loop-free path to a remote network? (Choose two.) A.The Reported Distance from a successor is lower than the local Feasible Distance. B.The Reported Distance from a successor is higher than the local Feasible Distance. C.The feasibility condition does not need to be met. D.The Feasible Distance from a successor is lower than the local Reported Distance. E.A feasible successor must be present. Answer: AE QUESTION 89 You are designing a new Ethernet-based metro-area network for an enterprise customer to connect 50 sites within the same city OSPF will be the routing protocol used. The customer is primarily concerned with IPv4 address conservation and convergence time. Which two combined actions do you recommend? (Choose two) A.Use a multipoint Metro-E service for router connections B.Use a single address per router for all P2P links C.Use P2P links between routers in a hub-and-spoke design D.Configure address aggregation at each site router E.Determine which OSPF routers will be DR/BDR Answer: AC QUESTION 90 Which two statements about MLD snooping are true? (Choose two) A.When MLD snooping is enabled, QoS is automatically enabled. B.A VLAN can support multiple active MLD snooping queries, as long as each one is associated to a different multicast group. C.AN MLD snooping querier election occurs when any MLD snooping querier goes down or if there is an IP address change on the active querier. D.When multiple MLD snooping queriers are enabled in a VLAN, the querier with the lowest IP address in the VLAN is elected as the active MLD snooping querier. Answer: CD QUESTION 91 Which two design option are available to dynamically discover the RP in an IPv6 multicast network? (Choose two) A.embedded RP B.MSDP C.BSR D.Auto-RP E.MLD Answer: AC QUESTION 92 Company A has a hub-and spoke topology over an SP-managed infrastructure. To measure traffic performance metrics. IP SLA senders on all spoke CE routers and an IP SLA responder on the hub CE router. What must they monitor to have visibility on the potential performance impact due to the constantly increasing number of spoke sites? A.memory usage on the hub router B.interface buffers on the hub and spoke routers C.CPU and memory usage on the spoke routers D.CPU usage on the hub router Answer: D QUESTION 93 Which two descriptions of CWDM are true? (Choose two) A.typically used over long distances, but requires optical amplification B.uses the 850nm band C.allows up to 32 optical earners to be multiplexed onto a single fiber D.shares the same transmission window as DWDM E.Passive CWDM devices require no electrical power Answer: DE QUESTION 94 SDWAN networks capitalize the usage of broadband Internet links over traditional MPLS links to offer more cost benefits to enterprise customers. However, due to the insecure nature of the public Internet, it is mandatory to use encryption of traffic between any two SDWAN edge devices installed behind NAT gateways. Which overlay method can provide optimal transport over unreliable underlay networks that are behind NAT gateways? A.TLS B.DTLS C.IPsec D.GRE Answer: C QUESTION 95 Company XYZ runs OSPF in their network. A design engineer decides to implement hot-potato routing architecture. How can this implementation be achieved? A.Enable iBGP and apply prepend to ensure all prefixes will have the same length of the AS path attribute value. B.Redistribute the external prefixes onto OSPF and ensure the total metric calculation includes only the ext value and the value is the same in all ASBRs. C.Enable OSPF load-balancing over unequal cost path. D.Redistribute the external prefixes onto OSPF and ensure that the total metric calculation includes external internal values. Answer: D QUESTION 96 What are two primary design constraints when a robust infrastructure solution is created? (Choose two.) A.monitoring capabilities B.project time frame C.staff experience D.component availability E.total cost Answer: BE QUESTION 97 SD-WAN can be used to provide secure connectivity to remote offices, branch offices, campus networks, data centers, and the cloud over any type of IP-based underlay transport network. Which two statements describe SD WAN solutions? (Choose two.) A.SD-WAN networks are inherently protected against slow performance. B.Control and data forwarding planes are kept separate. C.Improved operational efficiencies result In cost savings. D.Solutions include centralized orchestration, control, and zero-touch provisioning. E.Solutions allow for variations of commodity and specialized switching hardware. Answer: CD QUESTION 98 An architect designs a multi-controller network architecture with these requirements: - Achieve fast failover to control traffic when controllers fail. - Yield a short distance and high resiliency in the connection between the switches and the controller. - Reduce connectivity loss and enable smart recovery to improve the SDN survivability. - Improve connectivity by adding path diversity and capacity awareness for controllers. Which control plane component of the multi-controller must be built to meet the requirements? A.control node reliability B.controller stale consistency C.control path reliability D.controller clustering Answer: D QUESTION 99 Company XYZ is planning to deploy primary and secondary (disaster recovery) data center sites. Each of these sites will have redundant SAN fabrics and data protection is expected between the data center sites. The sites are 100 miles (160 km) apart and target RPO/RTO are 3 hrs and 24 hrs, respectively. Which two considerations must Company XYZ bear in mind when deploying replication in their scenario? (Choose two.) A.Target RPO/RTO requirements cannot be met due to the one-way delay introduced by the distance between sites. B.VSANs must be routed between sites to isolate fault domains and increase overall availability. C.Synchronous data replication must be used to meet the business requirements. D.Asynchronous data replication should be used in this scenario to avoid performance impact in the primary site. E.VSANs must be extended from the primary to the secondary site to improve performance and availability. Answer: CD Explanation: RPO and RTO tend to vary based on the application involved. These metrics tend to fluctuate between data that cannot be lost (i.e., low RPO but high RTO) such as financial and healthcare data as well as real-time systems that cannot be down (i.e., high RPO but low RTO) such as an E-commerce web server. QUESTION 100 Which undesired effect of increasing the jitter compensation buffer is true? A.The overall transport jitter decreases and quality improves. B.The overall transport jitter increases and quality issues can occur. C.The overall transport delay increases and quality issues can occur. D.The overall transport delay decreases and quality improves. Answer: C QUESTION 101 Which three tools are used for ongoing monitoring and maintenance of a voice and video environment? (Choose three.) A.flow-based analysis to measure bandwidth mix of applications and their flows B.call management analysis to identify network convergence-related failures C.call management analysis to identify CAC failures and call quality issues D.active monitoring via synthetic probes to measure loss, latency, and jitter E.passive monitoring via synthetic probes to measure loss, latency, and jitter F.flow-based analysis with PTP time-stamping to measure loss, latency, and jitter Answer: ACD QUESTION 102 Which two advantages of using DWDM over traditional optical networks are true? (Choose two.) A.inherent topology flexibility and service protection provided without penalty through intelligent oversubscription of bandwidth reservation B.ability to expand bandwidth over existing optical Infrastructure C.inherent topology flexibility with built-in service protection D.inherent topology flexibility with intelligent chromatic dispersion E.inherent topology flexibility with a service protection provided through a direct integration with an upper layer protocol Answer: AB QUESTION 103 Refer to the exhibit. This network is running OSPF and EIGRP as the routing protocols. Mutual redistribution of the routing protocols has been configured on the appropriate ASBRs. The OSPF network must be designed so that flapping routes in EIGRP domains do not affect the SPF runs within OSPF. The design solution must not affect the way EIGRP routes are propagated into the EIGRP domains. Which technique accomplishes the requirement? A.route summarization the ASBR interfaces facing the OSPF domain B.route summarization on the appropriate ASBRS. C.route summarization on the appropriate ABRS. D.route summarization on EIDRP routers connecting toward the ASBR Answer: D QUESTION 104 Company XYZ is running OSPF in their network. They have merged with another company that is running EIGRP as the routing protocol. Company XYZ now needs the two domains to talk to each other with redundancy, while maintaining a loop free environment. The solution must scale when new networks are added into the network in the near future. Which technology can be used to meet these requirements? A.multipoint route-redistribution with route filtering using ACLs B.multipoint route-redistribution with route filtering using route tags C.single point route-redistribution with route filtering using route tags D.single point route-redistribution with route filtering using ACLs Answer: B QUESTION 105 Company XYZ is in the process of identifying which transport mechanism(s) to use as their WAN technology. Their main two requirements are. - a technology that could offer DPI, SLA, secure tunnels, privacy, QoS, scalability, reliability, and ease of management - a technology that is cost-effective Which WAN technology(ies) should be included in the design of company XYZ? A.Software-defined WAN should be the preferred choice because it complements both technologies, covers all the required features, and it is the most cost-effective solution. B.Internet should be the preferred option because it is cost effective and supports BFD, IP SLA. and IPsec for secure transport over the public Internet. C.Both technologies should be used. Each should be used to back up the other one; where the primary links are MPLS, the internet should be used as a backup link with IPsec (and vice versa). D.MPLS meets all these requirements and it is more reliable than using the Internet. It is widely used with defined best practices and an industry standard. Answer: A QUESTION 106 Which MPLS TE design consideration is true? A.MPLS TE replaces LDP and the dependency of the IGP to identify the best path. B.MPLS TE provides link and node protection C.MPLS TE optimizes the routing of IP traffic, given the constraints imposed by backbone capacity and application requirements. D.MPLS TE requires Layer 3 VPN full-mesh topology deployment Answer: C QUESTION 107 The network designer needs to use GLOP IP address in order make them unique within their ASN, which multicast address range will be considered? A.239.0.0.0 to 239.255.255.255 B.224.0.0.0 to 224.0.0.255 C.233.0.0.0 to 233.255.255.255 D.232.0.0.0 to 232.255.255.255 Answer: C QUESTION 108 Drag and Drop Question Drag and drop the multicast protocols from the left onto the current design situation on the right. Answer: QUESTION 109 Drag and Drop Question Drag and drop the end-to-end network virtualization elements from the left onto the correct network areas on the right. Answer: QUESTION 110 Which two data plane hardening techniques are true? (Choose two) A.warning banners B.redundant AAA servers C.Control Plane Policing D.SNMPv3 E.infrastructure ACLs F.disable unused services G.routing protocol authentication Answer: CE QUESTION 111 You have been asked to design a high-density wireless network for a university campus. Which two principles would you apply in order to maximize the wireless network capacity? (Choose two.) A.Implement a four-channel design on 2.4 GHz to increase the number of available channels B.Choose a high minimum data rate to reduce the duty cycle. C.increases the number of SSlDs to load-balance the client traffic. D.Make use of the 5-GHz band to reduce the spectrum utilization on 2.4 GHz when dual-band clients are used. E.Enable 802.11n channel bonding on both 2.4 GHz and 5 GHz to increase the maximum aggregated cell throughput. Answer: BD QUESTION 112 Company XYZ is redesigning their QoS policy. Some of the applications used by the company are real- time applications. The QoS design must give these applications preference in terms of transmission. Which QoS strategy can be used to fulfill the requirement? A.weighted fair queuing B.weighted random early detection C.low-latency queuing D.first-in first-out Answer: C QUESTION 113 As part of workspace digitization, a large enterprise has migrated all their users to Desktop as a Sen/ice (DaaS), by hosting the backend system in their on-premises data center. Some of the branches have started to experience disconnections to the DaaS at periodic intervals, however, local users in the data center and head office do not experience this behavior. Which technology can be used to mitigate this issue? A.tail drop B.traffic shaping C.WRED D.traffic policing Answer: B QUESTION 114 A healthcare provider discovers that protected health information of patients was altered without patient consent. The healthcare provider is subject to HIPAA compliance and is required to protect PHI data. Which type of security safeguard should be implemented to resolve this issue? A.technical and physical access control B.administrative security management processes C.physical device and media control D.technical integrity and transmission security Answer: D QUESTION 115 Which two technologies enable multilayer segmentation? (Choose two.) A.policy-based routing B.segment routing C.data plane markings D.firewalls E.filter lists Answer: AD QUESTION 116 IPFIX data collection via standalone IPFIX probes is an alternative to flow collection from routers and switches. Which use case is suitable for using IPFIX probes? A.performance monitoring B.security C.observation of critical links D.capacity planning Answer: A QUESTION 117 Company XYZ wants to use the FCAPS ISO standard for network management design. The focus of the design should be to monitor and keep track of any performance issues by continuously collecting and analyzing statistical information to monitor, correct, and optimize any reduced responsiveness across the network. Which layer accomplishes this design requirement? A.fault management B.accounting management C.performance management D.security management Answer: C QUESTION 118 While designing a switched topology, in which two options is UplinkFast recommended? (Choose two ) A.when switches of different spanning-tree types are connected (for example. 802.1d connecting to 802.1w) B.on distribution layer switches C.when hello timers are changed to more aggressive values D.on access layer switches E.on the core switches Answer: AD QUESTION 119 You are using iSCSI to transfer files between a 10 Gigabit Ethernet storage system and a 1 Gigabit Ethernet server. The performance is only approximately 700 Mbps and output drops are occurring on the server switch port. Which action will improve performance in a cost-effective manner? A.Change the protocol to CIFS. B.Increase the queue to at least 1 GB C.Use a WRED random drop policy D.Enable the TCP Nagle algorithm on the receiver Answer: A QUESTION 120 Customer XYZ network consists of an MPLS core. IS-IS running as IGP a pair of BGP route reflectors for route propagation, and a few dozens of MPLS-TE tunnels for specific tactical traffic engineering requirements. The customer's engineering department has some questions about the use of the Overload Bit in the IS-IS networks and how it could be used to improve their current network design. Which two concepts about the Overload Bit are true? (Choose two.) A.It can be set on a router during the startup process for a fixed period of time B.Networks advertised within the LSPs of the respective node will become unreachable C.It forces the midpoint MPLS-TE node to reoptimize the primary tunnels going through the OL node. D.It can be set on a router until other interacting protocols have signaled convergence. E.It is not recommended on BGP Route Reflectors Answer: AD 2023 Latest Braindump2go 400-007 PDF and 400-007 VCE Dumps Free Share: https://drive.google.com/drive/folders/1wV28HLjscHjQ8TOrCglIRRU5nn6jytDd?usp=sharing
What is ReactJS app development, and what are its features?
Whether it is about increasing brand awareness globally or increasing sales and revenue, mobile applications are boosting businesses to new heights. The increased demand for mobile applications compelled companies to adopt the latest technology. React Native is one such ReactJS framework that is the most popular library for application development. What’s unique about React Native app development companies is that they use cross-platform development to provide services for both Android and iOS. In the following article, you will learn about ReactJS and React Native How ReactJS is different from React Native The features and benefits of React After reading this article, you will be able to decide wisely whether React Native app development services are the best option for your company’s mobile application needs or not.  What Is ReactJS? ReactJS is an open-source JavaScript framework developed by Facebook (Meta) that is used to efficiently build web applications with interactive UI using less code than traditional vanilla JavaScript. Jordan Walke, a software developer at Facebook, created it. Facebook developed ReactJS in its newsfeed area in 2011, but it was made available to the public in May 2013. In React, your application comprises small, reusable components, each containing a small piece of HTML code. These components function as building blocks that make it simpler to create complex websites. ReactJS controls the view layer of the MVC (model-view-controller) architecture with a DOM-based mechanism to fill or change the HTML DOM. As a result, it is substantially faster, as it only changes individual DOM elements instead of the complete DOM every time. What Are The Major Features Of ReactJS? ReactJS is quickly exceeding other JavaScript frameworks in popularity among front-end developers because of its outstanding features, including those listed below. JSX JSX is a React extension for JavaScript XML and has a syntax comparable to HTML, which is familiar to many developers. This HTML-like content can coexist with React’s JavaScript code thanks to JSX. Although JSX isn’t required in React, describing how the UI should look and making code easier to read and comprehend is suggested. Read more:- ReactJS app development and its features
Top signs that show infidelity of your partner by using Facebook
Have you noticed your partner acting strangely lately? There can be many reasons. Is their behavior suspicious to you? If so, you should spy on them. You can use several apps and software to spy on someone. Sometimes digital flirting can be too much for your relationship. Mostly we use Facebook for making best fb comments for friends pictures and for posting pictures on it as well. But many people can also misuse this platform for their betrayal of their partner and blackmailing purposes. So if you are also suspecting your partner of such a romantic affair on FB, then some tips can help you to figure out the truth. If your partner has sex outside the relationship, infidelity can take many forms. Online activities can indicate whether your partner is cheating on you. So look at the following things to deduce whether your partner is cheating on you.  They spend a huge amount of time on Facebook or their phone without revealing anything  Your romantic relationship may be strained or even broken by the constant use of your smartphone. This makes the other person feel that they are being overlooked. It's time to see if your partner is constantly checking their phone and avoiding you. Giving your partner space is important because only some things are possible. You should check if your partner is using digital tools to take control of your relationship. While privacy is good for a relationship, that doesn't mean the other person should use it for inappropriate purposes. Texting is the priority when they are using the phone  Texting and chatting with friends is fine, but it's important to be careful if you can do it for a long time. Its okay to get a late text from a friend, but it's something to worry about if you're getting messages more often. These conversations can easily sneak into your bedroom, regardless of who initiated them. You should always keep an eye on your partner and be aware of any other relationships they may be involved in. Your partner never leaves the phone  Your partner may be browsing Facebook at night. This is not something you should suspect. If your partner is trying to hide his activities from you, and suddenly you see him scrolling through Facebook, it's a sign that he's up to something. You have no idea about their new friends on FB  You should know your partner's friends if you are in a relationship. If you don't know who your new friends are or you've been talking to them all day, it's time to confront your partner. You should engage your partner if the other person constantly posts on your partner's Facebook wall. They don't share the password of the device  Will he take your phone? You can tell if your partner wants something by seeing if he responds negatively to your questions. You should talk to your partner immediately if you notice a change in their behavior. It cannot be ignored.
Setting up Netgear AC1200 wifi extender
Netgear AC1200 wifi extender setup is a device that boosts the range of existing wifi networks. It helps to extend the range of your home wifi network and provides better wifi coverage in all corners of your home. It is easy to set up and provides speeds up to 1200 Mbps, allowing you to enjoy your favourite content without buffering or lag. For Netgear AC12000 wifi extender setup. Follow the steps: Connect your Netgear AC1200 wifi extender to a power source. On your computer or mobile device, search for available wifi networks and connect to the extender's default wifi network. Open a web browser and enter www.mywifiext.net.This will open the Netgear Setup Wizard. Follow the on-screen instructions to set up your extender. Once the setup is complete, disconnect from the extender's default wifi network and connect to your new extended wifi network. Test the connection to make sure it is working properly. Congratulations! You have successfully set up your Netgear AC1200 wifi extender. Note: If you have trouble accessing the setup page, try resetting the extender and restarting the setup process. You may contact our experts or live chat with us by our official website. Netgear AC1200 wifi extender setup via WPS method Follow the instructions below to your Netgear EX3700 wifi extender setup using the WPS technique: Connect the Netgear AC1200 to an electrical outlet and wait for the green light to illuminate. When you press the W.P.S button on your AC1200, the green light on the extender will blink. Push the W.P.S button on your wireless router or modem within 1 - 2 minutes. So the extender is now communicating with your primary router. When the green light on your extension stops flashing. Your Ac1200 wireless extender will show three green lights. The Netgear AC1200 wifi extender setup is now connected. Note: If the WPS setup fails, you can manually configure the Netgear AC1200 wifi extender setup by following the instructions in the user manual. Netgear AC1200 Firmware Update To update Netgear AC1200 Firmware, you can either use the extender web interface or the Netgear Genie mobile app. Using the Web Interface: 1. Log in to your extender web interface by entering the Netgear extender default IP address (192.168.1.250) into your web browser. 2. Navigate to the Administration tab, then select Firmware Update. 3. Click the Check button to check for the latest firmware version. 4. If an update is available, click the Update button to download and install the firmware. Using the Netgear Genie App: 1. Download the Netgear Genie mobile app for your iOS or Android device. 2. Connect your mobile device to the same wireless network . 3. Open the Netgear Genie app and select the extender settings option. 4. Select the Firmware Update option. 5. Follow the on-screen instructions to check for and install the latest firmware version. Troubleshooting steps for fixing the Netgear AC1200 WiFi extender setup Check the power source: Ensure that the Netgear WiFi extender is properly connected to a power source and is turned on. Check the network connection: Make sure that the extender is properly connected to your router and that both the extender and the router are connected to the internet. Reset the extender: Press and hold the reset button for 10 seconds to restore the extender to its default settings. Update the firmware: Check if there are any firmware updates available for the extender and install them if necessary. Change the channel: Interference from other devices on the same channel can cause issues with the extender. Try changing the channel and see if that improves the connection. Change the placement: The placement of the extender can affect its performance. Try moving it to a different location or increasing the distance between the extender and the router. Disable other WiFi devices: If there are other WiFi devices connected to the same network, try disabling them one by one to see if they are interfering with the connection. Check for obstructions: If there are physical obstructions between the router and the extender, try removing them or repositioning the extender. Check for network congestion: If there are many devices connected to the same network, try disconnecting some of them to reduce network congestion. If you face any problem setting up Netgear AC1200 wifi extender setup using this process then don't hesitate to contact our experts or live chat with us via our official website.