canhoangthinh
10+ Views

Cân điện tử 100kg - Đơn vị cung cấp cân 100kg chất lượng

Cân điện tử 100kg dòng cân được sử dụng phổ biến trong các lĩnh vực ngành hàng hiện nay, sử dụng cho cân nông sản, cân thủy sản cân trọng lượng hàng hóa các loại có độ chuẩn xác đến từng gam
Kích thước sàn cân 40x50cm, 50x60cm với khung bàn cân được làm bằng sắt sơn tĩnh điện, mâm cân bằng inox chống ăn mòn
Lắp đặt một số bộ chỉ thị đầu cân 100kg chính hãng như cân TPSDH, cân DIGI 28SS, cân DIGI 166SS, cân Ohaus, cân Metteler Toledo
Công ty Cân Hoàng Thịnh đơn vị cung cấp cân điện tử 100kg uy tín vì?
+ Công ty được thành lập lâu đời và có nhiều năm kinh nghiệm trong lĩnh vực cân điện tử
+ Nhà phân phối các dòng cân điện tử chính hãng chất lượng với giá tốt nhất
+ Hệ thống phân phối cân điện tử trên toàn quốc, giao hàng nhanh chóng, hỗ trợ kỹ thuật kịp thời
+ Bảo hành chính hãng lên đến 24 tháng đối với tất cả các sản phẩm
Comment
Suggested
Recent
Cards you may also be interested in
How to Keep Workers Safe from Crane Hazards
The cost of injuries from industrial accidents is high. In the U.S., workplace injuries claimed the lives of more than 25,000 people in 2016. The cost of injuries from industrial accidents is high. In the U.S., workplace injuries claimed the lives of more than 25,000 people in 2016, according to statistics from the Bureau of Labor Statistics. However, keeping workers safe from hazardous conditions at work doesn’t have to be an expensive endeavor. Preventing crane-related hazards and preventing occupational injuries through training and safety measures can be done with a little forethought and planning. Keeping your staff protected against hazards at work isn’t always easy. Investing in protective equipment, such as hardhats or safety goggles, can be very expensive for small companies that don’t generate large amounts of revenue each year. However, it’s not necessary for every company to purchase top-of-the-line tools just to keep their workers safe from hazardous conditions at work. Here are some tips on how you can keep your employees safe from crane hazards without spending a lot of money. Conduct a hazard awareness training When you have employees working on-site with the risk of hazardous conditions, it’s important to keep them aware of the potential dangers. It’s also crucial to provide training for managers and supervisors so that they understand the hazards that their employees face on a daily basis. In addition to offering safety training, you should also conduct regular employee health and wellness programs. Regularly administered programs can help reduce the risk of injuries and improve overall health. A healthy work environment eliminates the risk of injuries and improves productivity. It’s important to keep your employees informed about crane safety and the potential hazards they could face at work. Conducting a hazard awareness training program can help you keep your employees safe from hazards while improving their overall health and well-being. Install safety nets for worker access You can protect workers from hazards when using cranes by installing safety nets for access to structures. When a worker is on a scaffold, access to the top of a structure is dangerous. Scaffolds aren’t designed to be used on the tops of buildings, and the risk of falling from great heights is high. If workers have to work on top of buildings, they need to be protected from hazards that can result from falling. You can protect your workers by installing safety nets on cranes. Safety nets should be placed at least three meters below the load. When using cranes with nets, workers should never be allowed above the nets, even to change a light bulb. Use warning systems for sensitive operations When operating cranes, it’s important to keep workers safe from hazards while they’re operating the machines. But using warning systems can also help protect your employees from injuries while they’re operating cranes. Warning systems can include ultrasonic sensors that activate alarms when a worker gets too close. This helps protect people from getting injured by a crane that’s operating at high speeds. Ultrasonic sensors have a range of approximately five meters. This means that when an employee gets too close to a machine, the sensors will activate an alarm, preventing them from getting hurt. Warning systems can also be used in conjunction with digital monitoring systems. Digital monitoring systems allow supervisors to remotely monitor crane operations. This can be used to help protect workers from hazardous conditions when cranes are operating at high speeds. Inspect your cranes regularly It’s important to inspect your cranes regularly to ensure that they’re safe to use. You should inspect your cranes at least once a month. Inspect your cranes to ensure that they’re structurally sound and that they’re in good working condition. It’s important to inspect your cranes on a regular basis because it can help you avoid hazards associated with using cranes. It’s also important to inspect cranes while they’re in operation. This can help you spot hazards, such as structural damage or malfunctioning equipment, while they’re happening. You should inspect cranes while they’re in operation because you can catch issues, such as a malfunctioning machine, before they have the opportunity to cause serious harm, such as a worker’s injury. Create a safe work environment Creating a safe work environment for employees will help protect them from hazards, including crane hazards. Create a safe work environment by implementing safety measures, such as fencing, gates, and warning signs, to keep your employees safe. In addition, you should also create a safe work environment for employees by offering them training and health and wellness programs, such as those discussed in this article. Providing your employees with these programs will help them prevent injuries and improve their overall health, which will help protect them from hazards, including crane hazards. Conclusion Keeping your employees safe from hazards is not only an important responsibility, but it’s also an essential part of ensuring that they return home safely at the end of their shifts. There are several steps you can take to keep your employees safe from crane hazards, such as installing safety nets for access to structures, using warning systems, and inspecting cranes regularly. It’s also important to conduct hazard awareness training and keep your employees informed about crane safety. There are several steps you can take to keep your employees safe from crane hazards, such as installing safety nets for access to structures, using warning systems, and inspecting cranes regularly. It’s also important to conduct hazard awareness training and keep your employees informed about crane safety.
Veggie imports on the rise as more Filipinos embrace a plant-based diet
The Philippines has long been known for its love of meat-based dishes, with traditional cuisine featuring dishes such as lechon (roast pig) and adobo (stewed meat). However, recent years have seen a rise in the popularity of plant-based diets in the country, with more Filipinos embracing a healthier and more environmentally sustainable way of eating. In this article, we will discuss the recent notification on Philippines Veggie imports. Philippines Import Data for Veggie The United States Department of Agriculture (USDA) predicts that the Philippines will import more legumes in the coming years as the country's diet becomes more plant-based. According to Philippines Trade Data, the Philippines' imports of leguminous vegetables are predicted to rise by 5-7% per year over the next five years. It went on to state that legume imports have already raised by 48% in the last five years, with a value of $88 million expected in 2022. Mung beans are by far the most important type, accounting for 90% of the 111,000 MT of imported pulses. The rise in legume imports has been attributed to a growing inclination towards plant-based diets, as well as the rising expense of animal protein and a higher reliance on imported food. According to Philippines Import Data, the Philippines now produce only enough legumes to cover 27% of its needs. What Plants are used in the Philippines? While the plant-based market in the Philippines remains tiny, it is rapidly expanding. WTH Foods, a Manila-based food tech business, released Umani, a frozen alternative meat line derived from microalgae, soy, and wheat proteins, in January. Monde Nissin Corp, which owns UK-based alternative meat brands Quorn and Cauldron Foods, achieved the Philippines' largest-ever IPO in 2021. In the United States, Burger King currently sells a plant-based Whopper. Get Philippines Import Export Data “What we are providing our customers is an option,” Burger King’s Philippines marketing director, Allan Tan, told the Manila Bulletin. “Filipinos are such big meat-eaters, and the insight for this local roll-out is to render them with an affordable alternative.” Why do Vegetable imports demand Growing? One reason for this increase in vegetable imports is the growing demand for plant-based foods in the Philippines. As more Filipinos become aware of the health benefits of a plant-based diet, they are seeking out new and innovative ways to incorporate vegetables into their meals. This has led to a rise in the availability of plant-based products in supermarkets and restaurants across the country. Another factor contributing to the increase in vegetable imports is the impact of climate change on local farming. The Philippines is highly vulnerable to the effects of climate change, including extreme weather events such as typhoons and droughts. These weather patterns can have a devastating impact on local farmers, making it difficult to grow crops and resulting in a shortage of fresh produce. As a result, vegetable imports have become an important source of food for Filipinos, ensuring a steady supply of nutritious fruits and vegetables throughout the year. Despite the increase in vegetable imports, there are still challenges to be overcome in promoting a plant-based diet in the Philippines. For many Filipinos, meat-based dishes are deeply ingrained in their cultural identity and traditions. Additionally, there is a perception that plant-based foods are more expensive and less flavorful than meat-based dishes. Know about Philippines Export Data. To overcome these challenges, there needs to be greater education and awareness about the benefits of a plant-based diet. This includes promoting the health benefits of vegetables, highlighting the environmental impact of meat consumption, and showcasing the delicious and varied range of plant-based dishes available. In conclusion, the rise in vegetable imports to the Philippines is a positive sign of the growing interest in plant-based diets in the country. As more Filipinos embrace a healthier and more sustainable way of eating, it is important to continue promoting the benefits of plant-based foods and addressing the challenges that still exist. With the right education and support, the Philippines have the potential to become a leader in plant-based cuisine and contribute to a more sustainable and healthier future for all. However, if you need any type of guidance related to Philippines Import Export Data, Connect with PhilippinesImportData professionals to grow your business worldwide.
Salesforce Professional Services: Driving Exceptional Customer Service and Satisfaction
Salesforce Professional Services is dedicated to driving exceptional customer service and satisfaction for businesses of all sizes and industries. By leveraging the power of the Salesforce platform, Salesforce Professional Services helps businesses transform their customer service processes and provide a better experience for their customers. One of the key ways that Salesforce Professional Services achieves this is through the implementation of the Salesforce Service Cloud. This powerful platform enables businesses to provide omnichannel support, personalized service, and intelligent automation to their customers. With Service Cloud, businesses can streamline their support processes, resolve issues more quickly, and provide a more satisfying experience for their customers. In addition to the Service Cloud, Salesforce Professional Services also offers a range of consulting and customization services to help businesses optimize their use of Salesforce and deliver exceptional customer service. These services can include everything from process design and optimization to custom application development and integration with other business systems. Overall, Salesforce Professional Services is committed to helping businesses provide exceptional customer service and satisfaction. By leveraging the power of the Salesforce platform and offering expert consulting and customization services, Salesforce Professional Services is well-positioned to help businesses achieve their customer service goals and drive growth and success in the long term. Need help? Connect with one of our Salesforce CRM Consultants.
Ai 30K Copy Paste Commissions Review-OTO’S
Introducing AI 30K Copy Paste Commissions AI 30K Copy Paste Commissions is an online program that claims to help users earn a significant income by leveraging the power of artificial intelligence. This program promises to generate massive commissions by automatically creating and promoting affiliate marketing campaigns on behalf of its users. However, the effectiveness of this program is questionable, and we are here to provide you with an unbiased and detailed review of this product. What is AI 30K Copy Paste Commissions? The AI 30K Copy & Paste Commissions is a new method and system that generates over $30,000 in affiliate commissions every month. It’s a simple process of copying and pasting affiliate links into the system, and the rest is taken care of. The system employs an underground software, system, and AI that clones a unique business model discovered accidentally in 2017. The method involves promoting affiliate offers with bonuses and bonus pages, also known as money pages. The bonuses serve as incentives, compelling people to make purchases through the affiliate links. The system equips users with all the necessary tools to earn automated affiliate commissions by promoting the hottest products and software on the market. It offers 100% done-for-you bonuses and bonus pages. With the AI 30K Copy & Paste Commissions system, anyone can succeed, even without prior online experience or technical skills. As long as you can copy and paste your affiliate link as directed, you qualify for success with this system. The system provides a way for people to get paid day after day, even if they have never made money online before. And in 2023, the whole process has become even easier thanks to ChatGPT. The best part about the AI 30K Copy & Paste Commissions system is that it works without any previous experience, technical skills, or budget to start. All you need is the ability to use a mouse to get great results. The system employs done-for-you money pages that offer bonuses to potential buyers. This is a proven psychological hack that encourages people to make purchases. The system generates at least $30,000 or more per month on autopilot using these done-for-you money pages. Overview Vendor:Glynn Kosky Product:AI 30K COPY & PASTE COMMISSIONS Niche:Affiliate Marketing Launch Date:2023-Mar-27 Launch Time:10:00 EDT Front-End Price:$19 Official website:Click Here How Does AI 30K Copy Paste Commissions Work? After purchasing your license, simply plug in your affiliate link and adjust a few settings, and let the System handle the rest for you. Inside the System, you’ll discover “Done-For-You” money pages that you can activate to get started right away. Traditionally, setting up these pages and sites would be a tedious and time-consuming process. However, thanks to the introduction of Artificial Intelligence (AI) and ChatGPT, the process is now faster, easier, and more profitable thanks to intelligent AI automation. Our money pages and websites generate commissions from a range of affiliate products. I personally earn passive income from affiliate campaigns that I promoted years ago, with the System consistently generating over $30,000 in affiliate commissions each month. Creating a new money site takes only a few clicks, and it can provide you with a new passive income stream in seconds. All it takes is a simple copy and paste to get started, making it easy and quick for anyone to use. AI 30K Copy Paste Commissions OTO’S 30K Copy & Paste Commissions App – Worth $997 30K Copy & Paste Commissions DFY Campaigns – Worth $997 30K Copy & Paste Commissions Video Series – Worth $19730K Copy & Paste Commissions QuickStart Guide PDF – Worth $47 30K Copy & Paste Commissions Checklist – Worth $47 Secret Email Swipe File (300+) – Worth $497 100% FREE Autoresponder  – Worth $37/Month 100% FREE Traffic System – Worth $197 $30K In 7 Days Case Study – Worth $497 LIVE Orientation Masterclass – Worth $197 Secret Affiliate Community Group – Worth $197 >>Get Instant Access Now<<
Global Electric ATV and UTV Market Size and Growing Demands, Latest Technology, New Product, New Entrants and Forecast by 2030
According to VynZ Research, the Global Electric ATV and UTV Market Size will be at USD 4.58 billion by 2030, and it is anticipated to grow at a CAGR of 21.7% during the forecast period (2022-2030) The research report offers a thorough overview of the global market for Electric ATV and UTV Market and insightful analysis on segmentation, dynamics, competition, and regional growth. The report's predictions are supported by recognized research methodologies and presumptions and look at specific strategies, then vendor profiles for the Global Electric ATV and UTV Market. The latest global Electric ATV and UTV Market report answers the following question · Which geographical areas will continue to be the most lucrative for companies in the global Electric ATV and UTV Market? · Which circumstances during the assessment period will cause a shift in the demand for Electric ATV and UTV Market? · How will the market be impacted by evolving trends? · Which businesses are dominating the Electric ATV and UTV Market Growth? · What successful tactics do market participants use to strengthen their positions in this environment? Get a sample copy: https://www.vynzresearch.com/automotive-transportation/electric-atv-and-utv-market/request-sample 'Competitive Insight' section of this report provides a comprehensive study for readers to get a thorough overview of market’s competitive landscape, challenges and opportunities for entrants to survives and for leading market players to participate in the growth plan. Top players in the market are: CFMOTO DRR USA Tesla Arctic Cat Inc. HISUN Honda Motor Co., Ltd. KUBOTA Corporation American LandMaster Polaris Inc. Segway Technology Co.,Ltd Market segment analysis The segments of the report are classified by Media Type, Indication, Modality, Route of Administration, Applicationand Geography and factors dominating the market and impacting the market growth plan during the forecast period. The global market is segmented into the following sub-segments: - Vehicle Type Insight and Forecast 2018-2030 · All-Terrain Vehicles · Utility-Terrain Vehicles Energy Storage Capacity Insight and Forecast 2018-2030 · Less Than 48V · 48V to 72V · More Than 72V Seating Capacity Insight and Forecast 2018-2030 · One-Seater · Two-Seater · More Than Two-Seater Displacement Insight and Forecast 2018-2030 · Less Than 400cc · 400cc-800cc · More Than 800cc Drivetrain Type Insight and Forecast 2018-2030 · Two-Wheel Drive (2WD) · Four-Wheel Drive (4WD) · All-Wheel Drive (AWD) Fuel Type Insight and Forecast 2018-2030 · Gasoline-Powered · Diesel-Powered · Electric-Powered · Solar Powdered Application Insight and Forecast 2018-2030 · Sports · Recreation · Military & Defense · Agriculture and Utility · Others Forecast methodology · Identify the variables and their impact on market · Evaluate the trend of regional market · Evaluate the strategies of competitors · Identify the market dynamics including change in demand, supply, challenges and opportunities · Examine past market trend along with challenges analyses · An understanding of the framework for adoption, development, distribution, and regulation. Reason to buy this report • It gives a detailed overview of the market by defining, describing, and classifying it. • The study includes the SWOT analysis and business plans of each vendor in the industry. • The report provides in-depth analyses of current market trends, trend forecasts, and growth factors. • In order to get a competitive edge, the study gives a thorough review of the vendor landscape, competitive analysis, and important market strategies. About Us Global market research company VynZ Research provides research, analytics, and consulting services for business plans. We provide specialized market research reports based on information that was predicted and estimated by industry professionals and experts. In addition to industry experts, the top-down and bottom-up approaches, data triangulation, and other techniques enable the market research leader to validate the data and deliver a major market study. Source: VynZ Research
ETP Plant in Bangladesh
The Top Provider, Installer, and Upkeep Supplier of ETP Plants in Bangladesh : Welcome to our organization, the main supplier of ETP plant arrangements in Bangladesh. We highly esteem conveying top-quality administrations that take care of all your modern wastewater treatment needs. Our group of specialists has been in the business for quite a long time, making us perhaps of the most solid organization in the business. What is an ETP Plant? An ETP (Emanating Treatment Plant) is a critical part of any modern foundation that releases wastewater into the climate. The plant is intended to eliminate contaminations and pollutants from modern wastewater before it tends to be securely delivered into the climate. Our Administrations We offer a thorough scope of administrations that incorporates the inventory, establishment, and upkeep of ETP plants. Our group of specialists utilizes the furthest down the line innovations to plan and introduce the most effective ETP frameworks customized to your exceptional modern wastewater treatment needs. We likewise give ordinary support administrations to guarantee that your plant is continuously running at ideal execution levels. Why Pick Our Organization? Top-Quality ETP Frameworks: We comprehend that modern wastewater treatment is a basic part of natural preservation. Along these lines, we give top-quality ETP frameworks that ensure successful and effective treatment of wastewater. Altered Arrangements: We comprehend that each industry has one of a kind wastewater treatment needs. Thusly, our group of specialists will work with you to plan and introduce a redid ETP framework that meets your particular requirements. Savvy Arrangements: We put stock in furnishing our clients with practical arrangements that ensure ideal execution levels. Our ETP frameworks are intended to set aside you cash while guaranteeing compelling and proficient wastewater treatment. Opportune and Proficient Administrations: We comprehend the significance of convenient administrations with regards to modern wastewater treatment. Thusly, we offer proficient and opportune types of assistance that ensure negligible margin time. Experienced Group of Specialists: Our group of specialists has been in the business for a really long time, making us perhaps of the most experienced organization in the business. We have the information and abilities important to convey top-quality administrations that meet and surpass your assumptions. Over all ETP Plant On the off chance that you're searching for a solid and experienced ETP plant provider, installer, and support supplier in Bangladesh, look no farther than our organization. We give top-quality ETP frameworks custom fitted to your exceptional necessities and offer proficient and opportune types of assistance that ensure negligible personal time. Reach us today to dive deeper into our administrations.
Global Automotive Catalytic Converter Market Report, Insight & Future Assessment for the Forecast Period by 2030
According to VynZ Research, the Global Automotive catalytic converter market Size will be at USD 83.1 billion by 2030, and it is anticipated to grow at a CAGR of 8.8% during the forecast period (2022-2030) The research report offers a thorough overview of the global market for Automotive catalytic converter market and insightful analysis on segmentation, dynamics, competition, and regional growth. The report's predictions are supported by recognized research methodologies and presumptions and look at specific strategies, then vendor profiles for the Global Automotive catalytic converter market. The latest global Automotive catalytic converter market report answers the following question · Which geographical areas will continue to be the most lucrative for companies in the global Automotive catalytic converter market? · Which circumstances during the assessment period will cause a shift in the demand for Automotive catalytic converter market? · How will the market be impacted by evolving trends? · Which businesses are dominating the Automotive catalytic converter market Growth? · What successful tactics do market participants use to strengthen their positions in this environment? Get a sample copy: https://www.vynzresearch.com/automotive-transportation/automotive-catalytic-converter-market/request-sample 'Competitive Insight' section of this report provides a comprehensive study for readers to get a thorough overview of market’s competitive landscape, challenges and opportunities for entrants to survives and for leading market players to participate in the growth plan. Top players in the market are: · Faurecia · Marelli Europe S.p.A. · Eberspächer · Tenneco Inc. · Yutaka Giken Company Limited. · FUTABA INDUSTRIAL CO.,LTD. · Sango Co., Ltd · BOSAL · Johnson Matthey · Boysen Market segment analysis The segments of the report are classified by Material, Product and Vehicle Type Geography and factors dominating the market and impacting the market growth plan during the forecast period. The global market is segmented into the following sub-segments: - Material Insight and Forecast 2018-2030 · Palladium · Platinum · Rhodium · Others Product Insight and Forecast 2018-2030 · Four-Way Catalytic Converter (FWCC) · Three-Way Oxidation-Reduction Catalytic Converter (TWCC) · Two-Way Oxidation Catalytic Converter · Diesel Oxidation Catalyst Vehicle Type Insight and Forecast 2018-2030 · Passenger Cars · Light Commercial Vehicles · Heavy Commercial Vehicles Forecast methodology · Identify the variables and their impact on market · Evaluate the trend of regional market · Evaluate the strategies of competitors · Identify the market dynamics including change in demand, supply, challenges and opportunities · Examine past market trend along with challenges analyses · An understanding of the framework for adoption, development, distribution, and regulation. Reason to buy this report • It gives a detailed overview of the market by defining, describing, and classifying it. • The study includes the SWOT analysis and business plans of each vendor in the industry. • The report provides in-depth analyses of current market trends, trend forecasts, and growth factors. • In order to get a competitive edge, the study gives a thorough review of the vendor landscape, competitive analysis, and important market strategies. About Us Global market research company VynZ Research provides research, analytics, and consulting services for business plans. We provide specialized market research reports based on information that was predicted and estimated by industry professionals and experts. In addition to industry experts, the top-down and bottom-up approaches, data triangulation, and other techniques enable the market research leader to validate the data and deliver a major market study. Source: VynZ Research
5 Best Pocket Routers for Fast Internet Connectivity on a Budget in Bangladesh
In today's fast-paced world, we rely heavily on the internet for various purposes, including work, education, entertainment, and communication. However, not everyone can access reliable high-speed internet connectivity, especially in developing countries like Bangladesh. This is where pocket routers come in handy. Pocket routers are compact, portable devices that allow you to connect to the internet on the go without needing a fixed broadband connection. This article will discuss the five best pocket routers for fast internet connectivity on a budget in Bangladesh. 1. TP-Link TL-WR802N The TP-Link TL-WR802N is a versatile, affordable pocket router with fast internet connectivity. It supports wireless speeds of up to 300Mbps and features a compact design that makes it easy to carry around. The router has a built-in Ethernet port that allows you to connect to a wired network, and it also supports multiple operating modes, including access point, client, and WISP mode. One of the most significant advantages of the TP-Link TL-WR802N is its ease of use. The router's user-friendly interface makes it easy to set up and configure. It also has a built-in power adapter, eliminating the need for an external power source. Overall, the TP-Link TL-WR802N is an excellent choice for a fast, reliable, and affordable pocket router in Bangladesh. 2. Huawei E5573Cs-609 The Huawei E5573Cs-609 is another popular pocket router that offers fast internet connectivity on a budget. It supports LTE Cat4, which provides download speeds of up to 150Mbps and upload speeds of up to 50Mbps. The router also features a compact and lightweight design, making it easy to carry around. The Huawei E5573Cs-609 has a built-in battery that provides up to 6 hours of continuous use and connects up to 10 devices simultaneously. It also supports multiple frequency bands, making it compatible with various network providers in Bangladesh. The router has a user-friendly interface that allows you to monitor your data usage and easily manage your connected devices. 3.Netgear AC810-100EUS The Netgear AC810-100EUS is a premium pocket router that offers lightning-fast internet connectivity on the go. It supports 4G LTE speeds of up to 600Mbps and features a powerful battery that provides up to 11 hours of continuous use. The router also supports dual-band Wi-Fi, connecting you to 2.4GHz and 5GHz networks. The Netgear AC810-100EUS has a sleek and compact design that makes it easy to carry around, and it can connect up to 15 devices simultaneously. It also has a user-friendly interface that allows you to monitor your data usage, manage your connected devices, and even set up a guest network. 4. D-Link DIR-506L The D-Link DIR-506L is a versatile and affordable pocket router that offers fast internet connectivity on a budget. It supports wireless speeds of up to 300Mbps and features a built-in battery for up to 4 hours of continuous use. The router also supports multiple operating modes, including access point, client, and repeater. One of the most significant advantages of the D-Link DIR-506L is its versatility. Depending on your needs, it can serve as a portable Wi-Fi hotspot, a wireless router, or a repeater. The router also has a user-friendly interface that makes it easy to set up and configure. 5. Tenda 4G185 The Tenda 4G185 is a compact and affordable pocket router that offers. Fast internet connectivity on a budget in Bangladesh. It supports LTE speeds of up to 150Mbps and features a built-in battery that provides up to 6 hours of continuous use. The router connects up to 10 devices simultaneously and supports multiple operating modes, including 4G router mode, 4G modem mode, and Wi-Fi extender mode. One of the most significant advantages of the Tenda 4G185 is its compatibility with various network providers in Bangladesh. The router supports multiple frequency bands, making it easy to connect to different networks. It also comes with a user-friendly interface that allows you to easily monitor your data usage and manage your connected devices. Conclusion Pocket routers are an excellent option for anyone looking for fast and reliable internet connectivity on a budget in Bangladesh. The five pocket routers mentioned above offer different features and specifications, but they all provide fast internet speeds and are portable enough to carry around. When choosing a pocket router, it's essential to consider factors such as compatibility with your network provider, battery life, number of devices it can connect to, and ease of use. With the right pocket router, you can stay connected and enjoy fast internet speeds wherever you go in Bangladesh.
Safety First: A Guide to Storing and Labeling Hazardous Substances
Working with hazardous substances requires extra care and caution. Storing and labeling hazardous substances correctly is essential to ensure the safety of workers, prevent accidents and protect the environment. A well-implemented safety plan that includes proper storage and labeling of hazardous substances is the first step in creating a safe and hazard-free workplace. This guide provides an overview of the safety measures needed to store and label hazardous substances and why these measures are so important. It also outlines the steps you can take to ensure that all hazardous substances are properly stored and labeled and that everyone in the workplace is aware of and understands the risks associated with them. Following these measures will go a long way toward creating a safe and healthy work environment. What are hazardous substances? A hazardous substance is any material that poses a potential risk to people and the environment. Classification of hazardous substances is based on their potential to cause harm, their persistence, and the difficulty of removing them from the environment. Hazardous substances are often flammable, corrosive, explosive, toxic, or a combination of these properties. Chemicals found in laboratories, including cleaning and disinfecting agents, reagents, and other substances used in research and teaching, are also hazardous substances. Hazardous substances may be used in various ways. Some examples include storing them in bulk in a central location or using them in small quantities with various equipment, such as pipettes and microtiter plates. Why is storing and labeling hazardous substances important? Proper storage and labeling of hazardous substances are vital safety measures that help protect workers and the environment. Incorrect storage and labeling of hazardous substances can lead to accidents, injuries, and even fatalities. Following these safety measures will also help you adhere to workplace regulations and standards and protect your organization from costly fines and penalties. When using hazardous substances, you should always be aware of their properties, correct labeling, and safe storage. This will help you avoid mistakes, such as mixing incompatible chemicals or storing the wrong substance in the wrong container. What are the safety measures needed to store and label hazardous substances? There are several safety measures needed to store and label hazardous substances correctly: - Hazardous Substances Inventory - First, you should conduct a comprehensive inventory of all hazardous substances used in your organization. This inventory should include the type, quantity, container type, location, and expiration date of each substance. Your inventory should be available to all workers and be easily accessible. - Hazardous Substances Training - Always provide workers with hazardous substances training. This training should be tailored to the substances used in your organization and the potential hazards associated with them. - Written Standard Operating Procedures - Always follow written procedures for storing and handling hazardous substances. Your procedures should be up-to-date and include a detailed description of the hazards associated with each substance. - Labeling of Hazardous Substances - Label all containers holding hazardous substances and follow any applicable regulatory requirements. Make sure that all labels are legible and are placed in a way that makes them visible but not easily accessible. - The Universal Symbols for Hazardous Substances - Always use the universal symbols to label containers holding hazardous substances. These symbols indicate the nature of the hazards associated with the substances and the required safety measures. What are the steps to store and label hazardous substances correctly? To store and label hazardous substances correctly, follow these steps: - Assess the Hazards Associated with the Substances Used in Your Organization - First, assess the hazards associated with the substances used in your organization and create a list of those substances. This is the first step in storing and labeling hazardous substances correctly. - Identify the Equipment and Areas Used for the Storage and Handling of Hazardous Substances - Next, identify the equipment and areas used for the storage and handling of hazardous substances and the potential risks associated with them. - Choose the Appropriate Containers for the Storage and Handling of Hazardous Substances - Once you’ve identified the equipment and areas used for the storage and handling of hazardous substances, you can choose the appropriate containers for each substance. - Choose the Appropriate Location for the Storage of Hazardous Substances - Next, choose the appropriate location for the storage of hazardous substances, taking into account the risk they pose to people and the environment. - Always Comply With the Labeling Requirements of Hazardous Substances - Finally, always comply with the labeling requirements of hazardous substances. What are the consequences of not storing and labeling hazardous substances correctly? Not storing and labeling hazardous substances correctly can result in a number of negative consequences, including fines, injuries, and fatalities. It can also lead to the release of hazardous substances into the environment, which can have lasting effects on wildlife and ecosystems. If you fail to store and label hazardous substances correctly, you may be forced to shut down your operations, which will impact productivity and profitability. If an accident results from the incorrect storage and labeling of hazardous substances, you could face hefty fines and be held liable for any injuries and/or fatalities that result. Additionally, you may have to pay for the decontamination and disposal of the environment, as well as the repair or replacement of damaged equipment. If a significant amount of hazardous substances are released into the environment, they can have harmful effects on wildlife, ecosystems, and public health. What are the best practices for storing and labeling hazardous substances? To store and label hazardous substances correctly, use the following best practices: - Use Standardized Containers and Labels - Always use standardized containers and labels for storing hazardous substances. Select containers that are properly labeled, child-resistant, and designed to the appropriate DOT (Department of Transportation) specifications if applicable. Containers should be clearly marked with the correct chemical name and hazard information. Select containers that are appropriate for the volume and quantity of substances used. - Comply With the Expiration Dates of Hazardous Substances - Always comply with the expiration dates of hazardous substances, and replace them as necessary. - Train Workers Who Handle Hazardous Substances - Always train workers who handle hazardous substances and provide them with updated training as necessary. - Always Follow the Written Standard Operating Procedures for the Storage and Handling of Hazardous Substances - Finally, always follow the written standard operating procedures for the storage and handling of hazardous substances. What should safety training be provided to workers handling hazardous substances? All workers who handle hazardous substances should be provided with safety training. This training can be tailored to the specific substances used in your organization and the potential hazards associated with them. The training should cover the following topics: the hazards associated with the substances, the proper use and handling of the substances, the appropriate personal protective equipment (PPE) needed when handling the substances, and how to properly clean up spills of the substances. Workers who handle hazardous substances should be re-trained every year or more frequently if there are significant changes in the workplace, such as adding new substances or changing their use. Conclusion There are many hazards associated with working with hazardous substances. When used correctly and stored in the appropriate containers, these substances can be a valuable resource for the laboratory. Every laboratory should have a Hazardous Substance Inventory that includes the name, quantity, location, and expiration date of these substances. When storing these substances, make sure they are properly labeled and in containers designed for the specific chemical. When working with hazardous substances, always follow safety procedures and use the correct safety equipment.
Everything You Need To Know About Worm Gears
Gear up for an exciting ride as we dive into the fascinating world of worm gears! These complex mechanisms might seem daunting at first, but fear not — with our comprehensive guide, you’ll be a worm gear expert in no time. Whether you’re a mechanical engineer looking to brush up on your knowledge or simply curious about how these ingenious devices work, this post has everything you need to know and more. So buckle up and get ready to discover the ins and outs of worm gears! What Are Worm Gears? Worm gears are one of the most basic types of gears used in machinery. They are cylindrical in shape and have teeth that mesh with each other to create rotational force. Worm gears are typically used in gearboxes and transmissions, where they are used to reduce speed or increase torque. Types Of Worm Gears There are three main types of worm gears- solid, hollow, and hypoid. Each type has its own advantages and disadvantages that should be considered when selecting the right gear for a given application. 1. Solid worm gears: Solid worm gears are the most common type and are typically used in heavy-duty applications. They are very strong and have a long life span, but they are also very difficult to manufacture. 2. Hollow worm gears: Hollow worm gears are less common than solid gears, but they offer some advantages over their solid counterparts. They are lighter in weight and easier to manufacture, but they are not as strong as solid worm gears. 3. Hypoid worm gears: Hypoid worm gears are the least common type of worm gear, but they offer the best strength-to-weight ratio of any type. They are also more difficult to manufacture than either solid or hollow gears. How Do Worm Gears Work? Worm gears are one of the most efficient ways to transmit rotational motion between two shafts that are at right angles to each other. They are used in a wide variety of applications, such as in automotive transmissions and gearboxes, conveyor belts, and escalators. Worm gears consist of a worm, which is a screw-like shaft with a spiral groove cut into it, and a gear wheel, which has teeth that mesh with the worm’s spiral groove. The worm can turn the gear wheel, but the gear wheel cannot turn the worm. The worm gears is high in reduction ratios. A typical reduction ratio for a worm gear is 100:1, which means that the gear wheel will turn one full revolution for every 100 revolutions of the worm. This allows for very precise control over speed and torque transmission. Advantages and disadvantages of worm gears If you’re looking for a compact and efficient way to transmit power between two shafts, worm gears may be the answer. Worm gears are used in a wide variety of applications, from automotive to industrial machinery. But what exactly are they, and how do they work? Keep reading to learn everything you need to know about worm gears. Worm gears are gear reducers that consist of a cylindrical worm screw meshed with a helical gear. The worm can turn the gear, but the gear cannot turn the worm. This makes worm gears ideal for applications where high reduction ratios are needed in a small space. One advantage of worm gears is their efficiency. Thanks to the rolling motion of the meshed teeth, there is little sliding friction between the gear and the worm screw. This makes them much more efficient than other types of gear reducers, such as spur or helical gears. Another advantage of worm gears is their durability. The rolling motion of the teeth also means there is no direct contact between them. This reduces wear and tear on the teeth, making worm gears much more durable than other types of gear reducers. There are some disadvantages to using worm gears, however. One is that they are not as strong as other types of gear reducers and can strip if overloaded. Another disadvantage is that they can be noisy due to the meshing of the teeth. Industrial Applications Of Worm Gears Worm gears are widely used in many industries due to their unique properties. They are often used in applications where high reduction ratios are required, or where high torque needs to be transmitted between two shafts that are not aligned. Worm gears can be used in a wide variety of industries, including: - Automotive industry - Aerospace industry - Food and beverage industry - Manufacturing industry - Mining industry - Oil and gas industry When to use worm gears Worm gears are used when there is a need to transfer motion between two non-intersecting axes, or when the gear ratio required is greater than what conventional spur gear can provide. Another common use for worm gears is when high reduction ratios are needed in a limited amount of space. How to maintain worm gears If you want your worm gears to last, it’s important to maintain them properly. Here are some tips on how to do that: - Keep them clean: Worm gears should be kept free of dirt, grit and other debris. This can be done by regularly cleaning the gears with a soft brush or cloth. - Lubricate them: Lubrication is key to preventing wear and tear on worm gears. Be sure to use the proper type of lubricant for your particular gear set. - Inspect them regularly: It’s a good idea to inspect your worm gears frequently for signs of wear or damage. If you notice any problems, be sure to address them right away. Conclusion Worm gears are an incredibly useful and powerful tool that can be used in a wide variety of applications. They provide more power and torque than traditional gear systems, while still being able to maintain precision and accuracy. With their unique design, they are able to reduce noise levels as well as providing smoother rotational motion. When properly configured, worm gears offer reliable performance with minimal maintenance requirements. Knowing all the information listed above should help you make an informed decision when selecting the right worm gear for your application needs. Parkash Gears a leading Worm gear manufacturer in India are experts at designing and worm gears for industries. For more info. contact us now! Checkout Our Products: 1. Spur Gear 2. Rotavator Gear 3. Sprocket gear Source: https://medium.com/@prakashgears/everything-you-need-to-know-about-worm-gears-73ec5ceda47b
The Value of Immersive Learning in the Education Industry
Immersive learning has become a transformative tool for imparting quality education. It has the perfect blend of 3D visuals, concepts, and imagined reality that has successfully translated and helped students understand complex subjects easily. It comprises virtual, mixed, and augmented reality tools to allow students to engage and interact better. This blog will cover all the essential pointers that help individuals and educators understand the value of immersive learning in the education industry. Before we begin to the core of the blog, let us briefly understand what immersive learning is. Definition of Immersive Learning It refers to the type of education that involves students actively engaging in real-world scenarios and simulations to learn new skills and knowledge. In addition, it allows individuals to apply what they’ve learned in a more meaningful and relatable way, leading to better knowledge retention. Besides that, it can help students develop problem-solving skills, critical thinking, and creativity. Examples of immersive learning include virtual reality simulations, role-playing exercises, and field trips. Types of Immersive Learning There are several types of immersive learning, such as - 1. Virtual Reality (VR) - uses computer-generated simulations to create a fully immersive environment. 2. Augmented Reality (AR) - overlays computer-generated information onto the real world to enhance the user's perception of their environment. 3. Mixed Reality (MR) - combines aspects of both VR and AR to create a hybrid environment that merges the real and virtual worlds. 4. Simulation-based training - uses computer-generated simulations to provide realistic training scenarios for various industries such as healthcare, aviation, and construction. 5. Game-based learning - uses interactive and engaging game-like environments to teach new skills and knowledge. 6. Role-playing - allows learners to take on a specific role and practice decision-making and problem-solving in a simulated environment. Importance of Immersive Learning in the Education Industry In today’s fast-paced and ever-changing world, traditional forms of education are often not enough to prepare students for the real world. Learners tend to forget 70% of the content in just 24 hours, and almost 90% disappears within a month. However, with the help of immersive learning, the stats can change. The VR, AR, and MR techniques have rapidly changed education patterns and delivery. The VR in the education market is expected to grow from USD 656.8 million in 2018 to USD 13098.2 million by 2026. Countries like North America, the US, Korea, India, etc., are adopting the ways of VR education. There are several benefits of implementing the concept in teaching and learning, which are as follows - Enhances engagement and motivation - with the advent of mobile and development, modern life is full of distractions. But, with the help of the concept, it creates unique content that allows students to engage and interact better. In addition, it can lead to increased motivation and involvement in different scenarios. Provides space for practice - There’s a famous quote saying that “practice makes a man perfect.” Repetition leads to perfecting techniques and improves knowledge retention. The immersive technology helps in providing space for practice and improvement. It allows the students to explore new possibilities and outcomes, which is crucial for practical training. Learn through real-world scenarios - Immersive learning environments can provide a more realistic and relevant experience for students, allowing them to apply what they have learned to real-world scenarios. Get Access to unique experiences - It can provide students with access to experiences that may not be possible or practical in the physical world, such as visiting a historical site or exploring a remote ecosystem. Development of soft skills - In education, the environment is set and designed to focus on developing soft skills, such as problem-solving, critical thinking, analytical thinking, and communication. Scope of Immersive Learning in education - The value and scope of immersive education are pretty extensive and encompass a range of applications. Some examples include the following - K-12 Education The concept can be used to teach a wide range of subjects, such as history, science, geography, mathematics, etc., through virtual field trips, simulations, and interactive games. Higher Education - Immersive learning can be used in universities and colleges to provide students with hands-on, real-world experience in fields such as medicine, engineering, and architecture. Vocational Training - The technique can provide realistic training scenarios for various industries such as healthcare, aviation, and construction. Language Learning - The immersive education concept can enhance language learning by providing learners with an immersive environment where they can practice listening and speaking skills. Special need education - Immersive learning can provide disabled students with engaging and interactive learning experiences tailored to their specific needs. Corporate training and professional development - Immersive learning can give employees realistic training scenarios and simulations to develop skills and knowledge in various industries. Conclusion It’s no doubt that VR, AR, and MR are influencing education and learning to the extent of growth and development. The possibilities are immense, and so are the results. It has the potential to transform education by providing students with engaging and interactive learning experiences that can improve retention and understanding, increase engagement and motivation, and provide real-world relevance and the development of soft skills.
AI And Advance Machine Learning in BFSI Market to Generate $61.24 Billion by 2030
According to the report published by Allied Market Research, the global AI and advance machine learning in BFSI market garnered $7.66 billion in 2020, and is expected to generate $61.24 billion by 2030, witnessing a CAGR of 23.1% from 2021 to 2030. The report offers a detailed analysis of changing market trends, top segments, key investment pockets, value chain, regional landscape, and competitive scenario. Download Free Sample Report : https://www.alliedmarketresearch.com/request-sample/4334 Rise in investments by BFSI companies in AI and machine learning, preferences for personalized financial services, and increase in collaboration activities between financial institutes and AI & machine learning solution companies drive the growth of the global AI and advance machine learning in BFSI market. However, high cost of deployment for AI and advanced machine learning and lack of skilled professionals hinder the market growth. On the other hand, support in government initiatives and rise in investments to leverage the AI technology create new opportunities in the coming years. Covid-19 Scenario: The adoption of AI and advance machine learning in the BFSI sector increased during the Covid-19 pandemic due to shift toward “work from home” culture and need to carry out difficult tasks in banks and fintech organizations. Increase in digitization and transaction delays & need to raise the speed of payment processing led to increased adoption of AI and machine learning technologies. Furthermore, nearly 35% of banks reported that machine learning tools and data science technologies made a positive impact in supporting remote working among employees and providing overall security for projects. There has been increase in number of inquiries for various banking and fintech services during the pandemic. This accelerated the usage of machine learning-powered tools for management of sudden increase in customer enquiries. The report offers detailed segmentation of the global AI and advance machine learning in BFSI market based on component, deployment model, enterprise size, application, and region. Interested to Procure the Data? Inquire here @: https://www.alliedmarketresearch.com/purchase-enquiry/4334 Based on component, the solution segment accounted for the highest share in 2020, contributing to nearly four-fifths of the total share, and is projected to maintain its lead position during the forecast period. However, the service segment is expected to manifest the fastest CAGR of 25.5% from 2021 to 2030. Based on application, the fraud & risk management segment contributed to the highest market share in 2020, accounting for nearly one-third of the global AI and advance machine learning in BFSI market, and is estimated to continue its leadership status during the forecast period. However, the digital assistance segment is projected to witness the largest CAGR of 24.8% from 2021 to 2030. Based on region, North America held the largest share in 2020, accounting for more than two-fifths of the total market share, and is expected to maintain its dominance in terms of revenue by 2030. However, Asia-Pacific is projected to manifest the highest CAGR of 24.6% during the forecast period. List of companies profiled of the global AI and advance machine learning in BFSI market analyzed in the research include Amazon Web Services Inc., Cisco Systems, Inc., BigML, Inc, Hewlett Packard Enterprise Development LP, Fair Isaac Corporation, Microsoft Corporation, International Business Machines Corporation, SAP SE, RapidMiner, Inc., and SAS Institute Inc. Key Benefits For Stakeholders      The study provides an in-depth analysis of global AI and advanced machine learning in BFSI market forecast along with the current trends and future estimations to elucidate the imminent investment pockets. Information about key drivers, restraints, and opportunities and their impact analysis on global AI and advance machine learning in BFSI market trends is provided in the report. Porter’s five forces analysis illustrates the potency of the buyers and suppliers operating in the industry. The quantitative analysis of the market from 2021 to 2030 is provided to determine the market potential. Request Customization : https://www.alliedmarketresearch.com/request-for-customization/4334 Key Market Segments By Component Solution Services Implementation & Integration Service Training & Support Service Consulting Service By Deployment Model  On-premise Cloud  By Enterprise Size Large Enterprises SMEs   By Application Fraud & Risk Management Customer Segmentation Sales & Marketing Digital Assistance Others By Region North America U.S. Canada Europe UK Germany France Italy Spain Netherlands Rest of Europe Asia-Pacific China Japan India Australia  South Korea Rest of Asia-Pacific LAMEA Latin America  Middle East  Africa Key Market Players Amazon Web Services Inc. BigML, Inc Cisco Systems, Inc. Fair Isaac Corporation Hewlett Packard Enterprise Development LP International Business Machines Corporation Microsoft Corporation RapidMiner, Inc. SAP SE SAS Institute Inc. Related Reports: BFSI Crisis Management Market : https://www.alliedmarketresearch.com/bfsi-crisis-management-market-A11105 Digital Transformation in BFSI Market: https://www.alliedmarketresearch.com/digital-transformation-in-bfsi-market-A10570 Chatbot Market in BFSI: https://www.alliedmarketresearch.com/chatbot-market A2P Messaging in BFSI Market: https://www.alliedmarketresearch.com/a2p-messaging-in-bfsi-market-A11869 Augmented Analytics in BFSI Market: https://www.alliedmarketresearch.com/augmented-analytics-in-bfsi-market-A11748 Augmented Reality in BFSI Market: https://www.alliedmarketresearch.com/augmented-reality-in-bfsi-market-A11749 BFSI in IT Market: https://www.alliedmarketresearch.com/bfsi-in-it-market-A11751 About Us: Allied Market Research (AMR) is a full-service market research and business-consulting wing of Allied Analytics LLP based in Portland, Oregon. Allied Market Research provides global enterprises as well as medium and small businesses with unmatched quality of “Market Research Reports” and “Business Intelligence Solutions.” AMR has a targeted view to provide business insights and consulting to assist its clients to make strategic business decisions and achieve sustainable growth in their respective market domain. We are in professional corporate relations with various companies and this helps us in digging out market data that helps us generate accurate research data tables and confirms utmost accuracy in our market forecasting. Allied Market Research CEO Pawan Kumar is instrumental in inspiring and encouraging everyone associated with the company to maintain high quality of data and help clients in every way possible to achieve success. Each and every data presented in the reports published by us is extracted through primary interviews with top officials from leading companies of domain concerned. Our secondary data procurement methodology includes deep online and offline research and discussion with knowledgeable professionals and analysts in the industry. Contact Us: David Correa 5933 NE Win Sivers Drive #205, Portland, OR 97220 United States USA/Canada (Toll Free): +1-800-792-5285, +1-503-894-6022 UK: +44-845-528-1300 Hong Kong: +852-301-84916 India (Pune): +91-20-66346060 Fax: +1(855)550-5975 help@alliedmarketresearch.com Web: www.alliedmarketresearch.com Allied Market Research Blog: https://blog.alliedmarketresearch.com Follow Us on | Facebook | LinkedIn | YouTube 
BIS Certification For Electronic Products
BIS certification for electronic products is an obligatory requirement to sell or distribute electronic products in India as it signifies that a product meets the safety requirements. That gives rise to - which BIS certification scheme is applicable for electronic products. The Compulsory Registration Scheme is applicable to electronic products - it has been implemented for protection against electric shock, insulation resistance, electric strength, cap temperature rise, resistance to heat, and more.  ISI mark for electrical appliances - As mentioned, the CRS certificate is applicable to electronic and electrical appliances. Thus, there is no ISI mark for electrical appliances that exist, as ISI mark certification is applicable on products such as cattle feed, interlocking tiles, and other products, excluding electric and electronic products. Certification Process of CRS BIS Certification For Electronic Products:- 1- An application will be duly filed. 2- The Test Report Format (TRF) will be generated for an accredited laboratory. 3- Once TRF will be generated, it will be submitted under the applicant’s profile on the BIS portal. 4- An Indian applicant will be required to submit an affidavit cum undertaking in accordance with Form C. While a foreign applicant is required to appoint an Authorized Indian Representative (AIR) and should submit the affidavit cum undertaking as per Form A or B. 5- Thereafter, an application form will be submitted along with the required documents and the requisite fee. 6- A CRS certificate will be provided depending on the product's conformance with the established requirements.  How does JR Compliance Make CRS Certification Seamless? 1- Our CRS consultants will conduct a product analysis to understand the component or functions of the product.  2- Once understand a product’s components, the certification process will move forward as we will be aware of the applicable requirements for a product. 3- We will invest our resources and expertise in coordinating with the laboratory to ensure appropriate follow-ups and acknowledgments. 4- Our CRS consultants will take care of the certification requirements of Indian and foreign manufacturers. 5- If required we will also visit the BIS office on your behalf. 6- We will use our resources to inform you of the number of product samples required for testing because the sample requirement of the product differs depending on the product. Conclusion We - JR Compliance with experience of over 9+ years guarantee to establish real-time expectations and meet them by following the established requirements. We have got you covered - be it completing documentation, complying with the established standards, coordinating with officials, or whatnot, consider it done with our support.
PTZ-Camera-Distributor-In-Orissa
Ideatechnosolutions Pvt. Ltd is one of the leading companies to provide security system services And Odisha No1 Surveillance Company in Bhubaneswar, Odisha. Our installation is all good quality and we provide good service. And the maintenance is free. We are committed to developing high-end technology Security solutions with constant innovation, continuous improvement, and value-added services. We provide different types of ptz camera services and below are some of them. IR PTZ High-Speed Dome Camera-2- Technical Specification: IR 6-inch brief intelligent high-speed dome camera integration. 9PCS IR-III generation IR LED with the furthest IR range:120m. Features password protection to prevent unauthorized changes to the dome setting. EasyClip installation features. IR PTZ High-Speed Dome Camera- Technical Specification: IR 6-inch brief intelligent high-speed dome camera integration. 12PCS IR-III generation IR LED with the furthest IR range:120m. Features password protection to prevent unauthorized changes to the dome setting. EasyClip installation features. Vehicle Mount PTZ Night Vision Camera- Technical Specification: Infrared LED range up to 100 meters. Weatherproof design, high die-cast aluminum casing Protection grade IP 66. Supershock proof, suitable for vehicle surveillance Outdoor IR PTZ High-Speed Dome Camera- Technical Specification: High-Resolution LCD Screen 128x66 pixels, 21x8 Characters. Controls PTZ Cameras, Video Matric, DVR, etc. Network data setting, IP address setting. Network data setting, IP address setting. For more information contact this number- 9438613965,9937194867 Whatsapp number- 9937066333 Email: info@ideatechnosolutions.com #ptzcameramanufacturerinBhubaneswar, #ptzcameradealerinBhubaneswar, #ptzcameradistributorinBhubaneswar, #ptzcamerasupplierinBhubaneswar #securityideatechnosolutions, #ptzcameradistributorinorissa, #ptzcamerapriceinodisha, #ptzcamerainBaripadaOdisha