Dalenews
10+ Views

2023 Latest Braindump2go 350-801 PDF Dumps(Q110-Q144)

QUESTION 110
A remote office has a less-than-optimal WAN connection end experiences packed loss, delay, and jitter.
Which VoIP codec should be used in this situation?

A.G.722.1
B.G.711alaw
C.iLBC
D.G.729A

Answer: C

QUESTION 111
A user reports transfer failures from an IP phone for calls received from a PSTN to another PSTN number.
What is a reason for these failures?

A.The incoming calling search space of the SIP trunk does not include the partition of the line in the IP phone.
B.The service parameter related to Offnet to Offnet call Transfer is set to TRUE.
C.The IP phone is configured with the Wrong region.
D.The gateway is configured with the wrong device pool.

Answer: B

QUESTION 112
A customer is deploying a SIP IOS gateway for a customer who requires that in-bond DTMF relay is first priority and out-of-band DTMF relay is second priority. Which IOS entry sets the required priority?

A.dtmf-relay cisco-rtp
B.sip-notify dtmf-relay rtp-nte
C.dtmf-relay rtp-nte sip-notify
D.dtmf-relay sip-kmpl cisco-rtp

Answer: C

QUESTION 113
Refer to the exhibit. This INVITE is sent to an endpoint that only supports G.729.
What must be done for this call to succeed?

A.Noting: both sides support G.729.
B.Add a transcoder that supports G.711ualw and G.729.
C.ADD a media termination point that supports G.711ulaw and G.729.
D.Nothing: both sides support payload type 101.

Answer: B

QUESTION 114
Refer to the exhibit. You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?
A.The DNS record should be created for _ cisco-uds _tcp example.com.
B.The DNS record should be changed from _collab-edge._tcp.example.com to __collab-edge _tls.example.com.
C.The DNS record type should be changed from SRV to A.
D.Server 4.2.2.2 is not a valid DNS server.

Answer: B

QUESTION 115
What is the major difference between the two possible Cisco IM and presence high-availability modes?

A.Balanced mode provides user load balancing and user failover only for manually generated failovers.
Active/standby made provides an unconfigured standby node in the event of an outage, but it does not provide load balancing.
B.Balanced mode provides user load balancing and user failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
C.Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, but is does not provide load balancing.
D.Balanced mode provides user load failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, and is also provides load balancing.

Answer: B

QUESTION 116
Which two DNS records must be created to configure Service Discovery for on-premises Jabber? (Choose two.)

A._cuplogin._tcp.cisco com pointing to a record of IM&P
B._cisco-uds._tcp.cisco.com pointing to a record of Cisco Unified CM
C._cuplogin._tls.cisco.com pointing to the IP address of IM&P
D._cisco-uds._tls.cisco.com pointing to the IP address of Cisco Unified Communications manager
E._xmpp._tls.cisco.com pointing to a record of IM&P

Answer: AB

QUESTION 117
An engineer implements QoS in the enterprise network. Which command can to verify the correct classification and marking on a cisco IOS switch?

A.show policy-map
B.show class-map interface GigabitEthernet 1/0/1
C.show access-lists
D.show policy-map interface GigabitEthernet 1/0/1

Answer: D

QUESTION 118
Which field is configured to change the caller ID information on a SIP route pattern?

A.Calling party Transformation Mask
B.Route partition
C.Called party Transformation Mask
D.Connected Line ID Presentation

Answer: A

QUESTION 119
Which protocol does prime collaboration Assurance use to poll the health status of different systems in the collaboration environment?

A.SIP
B.SMTP
C.SCCP
D.SNMP

Answer: D

QUESTION 120
Refer to the exhibit. When a UC Administrator is troubleshooting DTMF negotiated by this SIP INVITE, which two messages should be examined next to further troubleshoot the issue? (Choose two.)

A.PRACK
B.UPDATE
C.SUBSCRIBE
D.NOTIFY
E.REGISTER

Answer: CD

QUESTION 121
An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to a remote user. Which type of provisioning is configured on the endpoint?

A.CUBE
B.CMS
C.CUCM
D.Edge

Answer: D

QUESTION 122
Which DiffServ marking is the most likely to drop packets?

A.AF32
B.AF12
C.AF11
D.AF13

Answer: D

QUESTION 123
Endpoint A is attempting to call endpoint B. Endpoint A only supports G.711 ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw. Which two media are resources are allocated to normalize packetization rates through transrating?

A.Hardware MTP on Cisco IOS Software
B.Software MTP on Cisco Unified Communication Manager
C.Software MTP on Cisco IOS Software
D.Software transcoder on Cisco unified Communications manager
E.Hardware transcoder on Cisco IOS Software

Answer: AE

QUESTION 124
When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?

A.Cisco Unified CM Group
B.Device Pool
C.SRST
D.Route Group

Answer: A

QUESTION 125
Which two elements of a dial plan define the domains that are accessible and are assigned to an endpoint? (Choose two.)

A.Call Admissions Control
B.Route patterns
C.Calling Search Spaces
D.Translation patterns
E.partitions

Answer: CE

QUESTION 126
An engineer with ID378163512 is designing a new dial plan for a customer that has offices in several countries on four continents around the world. This client also want to integrate with a Microsoft Lync backend, Which dial plan type does the engineer recommend?

A.SIP URI
B.TEHQ
C.H.323
D.E.164

Answer: D

QUESTION 127
Which version is used to provide encryption for SNMP management traffic in collaboration deployments?

A.SNMPv1
B.SNMPv3
C.SNMPv2
D.SNMPv2c

Answer: B

QUESTION 128
Which field of a Real-Time Transport Protocol packet allows receiving devices to detect lost packets?

A.CSRC (Contributing Source ID)
B.Timestamp
C.Sequence number
D.SSRC (Synchronization identifier)

Answer: C

QUESTION 129
Refer to the exhibit. When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?

A.IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)
B.SIP TLS (A) +SIP TLS (B) +SIP TLS (C)
C.SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)
D.SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)

Answer: C

QUESTION 130
An engineer is designing a load balancing solution for two Cisco Unified Border routers. The first router (cube1.abc.com) takes 60% of the calls and the second router (cute2.abc.com) takes 40% of the calls, Assume all DNS A records have been created.
Which two SRV records are needed for a load balanced solution? (Choose two.)

A.sip_udp.abc.com 60 IN SRV 1 40 5060 cube2.abc.com
B.sip_udp.abc.com 60 IN SRV 3 60 5060 cube2.abc.com
C.sip_udp.abc.com 60 IN SRV 60 1 5060 cube1.abc.com
D.sip_udp.abc.com 60 IN SRV 2 60 5060 cube1.abc.com
E.sip_udp.abc.com 60 IN SRV 1 60 5060 cube1.abc.com

Answer: AE

QUESTION 131
Refer to the exhibit. A call to an international number has failed.
Which action corrects this problem?

A.Assign a transcoder to the MRGL of the gateway.
B.Strip the leading 011 from the called party number
C.Add the bearer-cap speech command to the voice port.
D.Add the isdn switch-type primart-dms100 command to the serial interface.

Answer: B

QUESTION 132
Which user group is targeted by MRA services?

A.Call center agents who dial out to remote customers
B.Mobile workers in a host desk environment at HQ who log in every morning at possibility a different phone
C.Production floor users who need wireless mobility in remote areas of the factory
D.On-the-go mobile workforce who connect to corporate phone services using their own mobile device

Answer: D

QUESTION 133
Which Cisco Unified Communications Manager feature is to determine the maximum bit rate for a call between two video-endpoints?

A.Partitions
B.Locations
C.Regions
D.transformations

Answer: C

QUESTION 134
When a 8800 series phone is registered over MRA, where does it register?

A.Cisco Unified Communications Manager
B.Expressway-C
C.Cisco Unified Presence Server
D.Expressway-E

Answer: A

QUESTION 135
An engineer must manually provision a Cisco IP Phone 8845 using SIP. Which two fields must be configured for a successful provision? (Choose two.)

A.Media resources group list
B.SIP profile
C.CSS
D.Location
E.Device security profile

Answer: BE

QUESTION 136
What is the correct statement about CUCM and Cisco IM&P backups?

A.Backups should the scheduled during hours to avoid system performance issues.
B.Backups are saved as .tar files and encrypted using the web administrator account.
C.Backups are saved as unencrypted tar files.
D.Backups are not needed for subscriber Cisco Unified Communication Manager and Cisco IM and Presence servers.

Answer: A

QUESTION 137
Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)

A.Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
B.Add the audio forced command to voice service voip on the Unified Border Elements.
C.Check the Retry Call as Audio on the SIP trunk
D.Set Video bandwidth in the Region settings to 0.
E.Change the Video Capabilities dropdown on the endpoint to Disabled.

Answer: CD

QUESTION 138
There is a saturated link that has traffic shaping configured. How is incoming traffic processed?

A.Excess traffic is queued for later transmission.
B.Excess traffic is dropped.
C.Traffic is compressed so that the traffic fits within the bandwidth of the link.
D.Excess traffic is queued, and then dropped after the timer expires.

Answer: A

QUESTION 139
Refer to the exhibit. A customer submits this output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with a ISDN BRI interface, which BRI changes resolve the issue?

A.interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn incoming-voice voice
isdn send-alerting
isdn static-tei 0
B.interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-multipoint-setup
isdn incoming-voice voice
isdn send-alerting
isdn static-tei 0
C.interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn static-tei 0
D.interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-multipoint-setup
isdn incoming-voice voice
isdn send-alerting
isdn static-tei 0

Answer: C

QUESTION 140
Which SNMP service must be activated manually on the Cisco Unified Communications Manager after installation?

A.Cisco CallManager SNMP
B.SNMP Master Agent
C.Connection SNMP Agent
D.Host Resources Agent

Answer: A

QUESTION 141
Refer to the exhibit. An engineer verifies the configured of an MGCP gateway. The commands are already configured.
Which command is necessary to enable MGCP?

A.Device(config)# mgcp enable
B.Device(config)# ccm-manager enable
C.Device (config)# com-manager active
D.Device (config)# mgcp

Answer: D

QUESTION 142
What are two key features of the Expressway series? (Choose two.)

A.VPN connect toward the internal UC resources
B.B2B calls
C.IP to PSTN call connectivity
D.Device registration over the internet
E.SIP header modification

Answer: BD

QUESTION 143
An engineer deploys a Cisco Expressway edge server for a customer who wants to utilize all feature on the server. Which feature does the engineer configure on the Expressway edge?

A.VTC bridge
B.H.323 endpoint registration
C.SIP gateway for PSTN providers
D.MRA

Answer: D

QUESTION 144
An engineer is configuring a Cisco Unified Border Element to allow the video endpoints to negotiate without the Cisco Unified Border Element interfering in the process. What should the engineer configure on the Cisco Unified Border Element to support this process?

A.Configure path-thru content sdp on the voice service.
B.Configure a hardcoded codec on the dial peers.
C.Configure a transcoder for video protocols.
D.Configure codec transparent on the dial peers.

Answer: A
2023 Latest Braindump2go 350-801 PDF and 350-801 VCE Dumps Free Share:
Comment
Suggested
Recent
Cards you may also be interested in
Medical Credentialing
Medical credentialing is the process of verifying and evaluating the qualifications and credentials of healthcare providers, such as physicians, nurses, and other medical professionals, to ensure that they meet the standards required to practice medicine in a particular setting. This includes reviewing their education, training, licensure, work history, and other relevant information. Credentialing is typically done by hospitals, health systems, insurance companies, and best medical credentialing companies to ensure that their providers are qualified to provide safe and effective care to patients.
Pharmacy Automation Devices Market: Top Challenges to Face in 2022-2029
Pharmacy automation is at the heart of care management and medication dispensing models, facilitating accuracy and flexibility in operations. These trends are carving the niche for the global pharmacy automation devices market to burgeon and grow in the coming years. Of late, the healthcare domain has witnessed a significant boost in terms of technology adoption. The healthcare sector is rapidly advancing its processes to attain higher performance, cost-efficiency, high-quality output, and amplify patient success. Healthcare providers are exploring the nuancezs of robotics and other state-of-the-art technologies. To this end, pharmacy systems are being scaled by leveraging interactive voice recognition (IVR), outpatient management tools, and inventory management. Amid ongoing transitions and acceptance of new-age technologies, the pharmacy automation devices market has experienced significant expansion. For More Industry Insight Read: https://www.fairfieldmarketresearch.com/report/pharmacy-automation-devices-market Rising Patient Pool and Soaring Medication Errors to Unlock New Avenues for Pharmacy Automation Devices Lately, a consistent rise in the intricacy and number of medications has been observed, resulting in growing risks of medication errors. With a growing patient pool, patient waiting time and medication errors using conventional operational methods have surged at a record pace. The rising geriatric population and soaring incidence of fatal and chronic ailments are further adding to the misery. This clamors for devices and systems to better manage medical dispensing and other relevant activities. Growing awareness of the adverse effects of medication errors is spearheading technology proliferation and acceptance of new technology by healthcare professionals. Against this backdrop, pharmacies and hospitals are leveraging sophisticated automation technologies to improve patient safety and minimise operating costs. Emphasis on curtailing medication errors and the rising patient burden is creating promising growth prospects for the pharmacy automation devices market. Accelerated Demand for Medication Dispensing Systems Bodes Well for Pharmacy Automation Devices Market Automated medication dispensing systems are capable of dispensing medications with great precision while minimising procedural time. Significant safety enhancements and better accuracy have spikes in demand for medication dispensing systems. Moreover, these systems promote error elimination and ensure patient safety. Automatic pill dispenser machines facilitate effective management of inventory which results in cost curtailment in association with storage. Besides, the growing adoption of AI in pharmacy automation devices has further augmented its demand across the chain of pharmacies, creating demand for medication dispensing systems. Such a scenario is assuring influential growth across the global pharmacy automation devices market. North America Spearheads Dominance in Global Pharmacy Automation Devices Market due to Rising Prevalence of Chronic Diseases North America to reign supreme in the global pharmacy automation devices market. The rising prevalence of chronic ailments is building the momentum for use of modern pharmacy solutions and devices. Furthermore, errors in medication during dispensation and prescription have also increased at a notable pace. As a result, healthcare professionals are actively leveraging automated medication dispensing cabinets and systems for better regulation of drug tractability, enhancing dispensing speed, managing inventory, and reducing or eliminating dispensing errors. Prominent Market Players Some of the most competitive players in the global pharmacy automation devices market include KUKA AG, Arxium Inc., Becton Dickinson and Company, Capsa Healthcare, Scriptpro LLC, Omnicell Inc., Cerner Corporation, RxSafe LLC, Parata Systems LLC, Yuyama Co. Ltd., and Baxter International. Get a Sample Copy/TOC of XYZ Market Report: https://www.fairfieldmarketresearch.com/report/pharmacy-automation-devices-market/request-toc Contact Us : Fairfield Market Research London, UK UK +44 (0)20 30025888 USA (Toll-free) +1 (844) 3829746 Web: https://www.fairfieldmarketresearch.com/ Email: sales@fairfieldmarketresearch.com Follow Us: LinkedIn
(no title)
https://www.econease.com/2023/01/top-cpa-networks-experienced-internet-marketers-earnings-potential.html
Top 20 Ruby on Rails Gems For Web App Development
Ruby on Rails is a renowned web development platform. Ruby is an object-oriented interpreted 14th most popular programming language. Ruby on rails assists in making cool websites and apps. So it is a great choice for building a web application. RoR is an open-source framework distributed under an MIT license, so you do not have to spend money on the framework. RoR has reduced the time in coding your applications. So you can make your new products and market them even faster. If you are still wondering why Ruby on Rails is on the highest priority list when it comes to web development? Well, there are certain salient reasons that lie behind this are: Agile methodology Convention over configuration Huge collection of gems Automated testing Every developer is always looking forward to reducing the number of effort and time they put into building a web application. RoR is designed for them. RoR is an open-source framework. Along with the advantage of gems, developers can save time and effort.HTML, CSS, and JAVA is mostly time-consuming. So preferably Ruby on Rails is a popular choice for small businesses and start-ups due to its cost-effectiveness feature. Without inculcating extra costs, RoR offers all the features and functionalities developers need to build a high-quality product. Ruby is a popular and in-demand programming language in today's time and there is high demand for RoR professionals also. The data of the Built with trends website shows the statistics of 3,841.525 websites that use ruby on rails. Along with that 1145587 live websites currently using Ruby on rails. This data is enough to prove why you should choose ruby on rails over other languages. It is the most popular bach-end framework written in Ruby. It is a versatile tool and it has a flexible and wide range of capabilities. What is Ruby on Rails(RoR)? To create various types of applications RoR is used. Ruby is a programming language whereas Ruby on Rails is a development framework for web applications written in Ruby. With RoR you will get standard features and functionality that aids in making your web application. Have a look at real brands that use RoR: Twitter Hulu GitHub Shopify Etsy Fab Airbnb Slideshare CrunchBase Groupon What is Rails? Rail is a framework for web application development written in Ruby programming language. It provides structure to web developers for all the codes. Rails require less code but provide more capabilities than any other language or framework. What Are Gems in Ruby on Rails? Let us know what are ruby gems and why are they important. Ruby is a programming language. Rails work as their web development framework. Rails work as a software library or package library on your computer. These package libraries are considered “Ruby Gems”. Gems are libraries that allow any Ruby on rails developer to add functionalities without writing the code. Unlike HTML, CSS, and JAVA RoR language allows full-stack web application development. Kaminari is the most popular Rails Gems. In this article, I have jotted down a list of the 20 best Ruby on Rails Gems for web application development. Depending on your project needs you can consider their functions. List of Top 20 Best Ruby Gems for Web applications Kaminari If you look at the most standard rails gems, Kaminari is in the top position. It has approximately 5 million downloads. It is the most commonly used gem, using this gem anything can be paginated. Kaminari is a scope, engine-based, clean, powerful, agnostic, customizable, and sophisticated paginator for rails. GitHub: 8.3k stars PRY While integrating some libraries, writing code, or binding some gems doesn't integrate properly so during that time continuously we get errors. To eliminate that kind of issue and also for debugging the errors in our code PRY is the perfect choice you can use without any doubt. By using PRY we are able to implement step-by-step code debugging by setting the breakpoints. Features of PRY is syntax highlighting, command shell integration, navigation around the state, runtime invocation, exotic object support, and a powerful and flexible command system. GitHub: 6.6k stars DEVISE In some cases, we need to provide authentication and authorization for the specific application. If you are making an application on one of the social media networks or building an e-commerce solution. The developer needs to provide the Authorization and authentication for the specific application. In that case, the devise gem fits the best. To solve this some developers go for their own code for user authentication whereas most of the developers prefer to go for Ruby gem devise. Devise has 10 modules such as database authentication, omniauthable, confirmable, recoverable, registrable, rememberable, trackable, timeoutable, validatable, and lockable. GitHub: 23.1k stars CANCANCAN With this gem, we can define rules and permission for the users by limiting the experience of certain types of users and also gives us a layer of security. The Authorization definition library module allows developers to set the rules for users. GitHub: 5.3k stars ActiveRecord import It is a great gem to insert bulk data. It works as per active record associations, producing marginal SQL insert statements as needed. If you have a dedicated RoR developer along with this gem you will not have to deal with the N+1 insert issue. Active record is a magnificent choice for uploading ten records. Uploading multiple records can be a terrifying task. It is useful for the import of external data. Active record import reduces the transformation time. GitHub: 3.8k stars Figaro Figaro is Heroku-based rails gem application arrangement. It is an easy way to securely configure rails applications. For the secure configuration of rails-based applications, we will require YAML and ENV records. This gem has a show, capable enough to keep the arranged data and SCM separated from one another. It analyses the YML file and stores the result in ENV. GitHub:3.8k stars RSpec Rails This gem is perfect for developers who are in who are into writing unit test cases. This gem allows developers to incorporate the RSpec framework in a rails assignment. It is used in test-driven web application development and behavior-driven development environments. GitHub:4.9k stars Ahoy Ahoy is an analytic solution for native Javascript and ruby apps that tracks events and visits. Ahoy is a ruby engine responsible for creating visit tickets, that includes client device information, traffic source, and location. GitHub:3.8k stars Delayed Job To manage extensive running activities delayed job is used. Delayed job gem works as the storing of objects in the database. It takes care of the more strained consecutive activities for background tasks. Its new feature includes sending large numbers of newsletters, spam checks, image resizing, updating smart collections, and HTTP downloads. GitHub:4.8k stars PaperClips Paperclips work as rescue working with the file attachments. It requires a lot of effort and time. Paperclips keep an eye on the complete ruby application procedure. It converts images to thumbnails for use in custom rail applications. GitHub:9.1k stars Bullet This gem is specifically designed to increase web application performance by reducing the number of queries. It keeps an eye on queries while app development. Also, notify you when you should add loading (N+1) queries. GitHub:6.8k stars Pundit This ruby gem handles authorization via a very simple API. Mark here authorization and authentication both are different things. In the process of authorization, the device looks at users and examines their characteristics. To ensure the client they are using is allowed to take assess to certain features. It allows you to restrict certain parts of your application to approved users. GitHub:7.9k stars Active Admin This RoR plugin is for generating administration-style interfaces. To make it simple for the developers with very less effort, it extracts business application designs. Along with that, it has features like filters, downloads, global navigation, and APIs. GitHub:9.3k stars Sidekiq Most commonly used background processing tools in ruby on rails. The reason being it is a clean, standard, and efficient tool for processing ruby. Multithreading capability enhances speed and makes background processing much faster and simpler. GitHub:12.4k stars Rubocop Among developers, Rubocop is the first choice to identify code quality. It has the best quality of fixing simple errors on its own. Such as line breaks, gaps, syntax highlighting, and grammar. GitHub:12.2k stars Factory_bot Factoey_bot was originally known as a factory girl. It is a software library for Ruby that provides factory methods to create text fixtures for automated software testing. It provides fake data to run test cases, which makes the testing process simple and quick and cuts down the manual data entry timing. GitHub:7.7k stars Faker For use in testing, it creates fake data including names, addresses, and phone numbers. GitHub:10.6k stars Rolify It is a role management library that allows you to add and manage user roles in your application. GitHub: 3.1k stars Overcommit This gem makes it easy to add, configure and run tasks on Git hooks in your project. GitHub:3.8k stars Draper Developers use this gem to develop decorators around the model. Using this you can simplify the complex template. One can prepare a more easy view with this gem. GitHub:5.2k stars Conclusion To solve issues related to uploads, file testing, authentication, and authorization the above-listed ruby on rails are productive enough. To build a ruby on rails web app utilizing ruby on rails gems is a must. Note: This Post Was First Published on https://essencesolusoft.com/blog/top-best-ruby-on-rails-gems
How IoT integration in mobile app development services is changing the face of technology?
The Internet of Things (IoT) has taken the world by storm in recent years, and it has brought with it a wealth of opportunities for businesses and individuals. With the rapid expansion of the IoT, mobile app developers can now integrate IoT devices with mobile apps to create innovative, powerful, and scalable solutions that can transform the way people interact with technology. In this blog post, we will explore how IoT integration in mobile app development services is changing the face of technology. Looking for the complete blog, click here:- https://inmortal-technologies.blogspot.com/2023/03/how-iot-integration-in-mobile-app.html
Skincare Products Manufacturer In India
Ayurveda in India roots back to centuries. India has an extensive history in Ayurveda and there are such a lot of matters that are mentioned in the Ayurveda that might be used for making so many exceptional products. Aadhunik Ayurveda is one of the leading Ayurvedic Skincare products manufacturer, exporter and bulk supplier all over the world, that have been making Ayurvedic Skincare Products and personal care products for the huge number of clients. We have been supplying good quality Ayurvedic products all over the world. The company is engaged in Manufacturing and exporting with the brand name Aadhunik Ayurveda Vitals, a premium quality collection of Ayurvedic Skincare Beauty Products. They aim to provide best quality ayurvedic skincare products to their clients at most affordable prices. Ranges of Ayurvedic Skin Care Products at Aadhunik Ayurveda Aadhunik Ayurveda provides you to choose from more than 500 existing product formulations to the private labels on your brand name. However, in case you don’t find a component to fit your need, we can always customise formulas for you and this makes Adhunik the best custom formulation manufacturer, wholesaler, & supplier of ayurvedic certified skincare products. These products are enriched with the goodness of ayurvedic the age-old Indian science based on active natural, organic plant-ingredients, blended with traditional formulations. All products are packed with natural high-quality ingredients from world-class manufacturers. Most-prominent Ayurvedic Skincare Products Manufacturers Aadhunik Ayurveda supplying advanced and progressive solutions for whole skincare, body care, & wellness products. We are a well-certified Ayurvedic Skincare and Wellness products manufacturer company. We manufacture private labels, custom formulated, third party manufacturing for startups. We have the best natural, ayurvedic & 100% chemical-free (in-house) manufacturing line to produce various trending ayurvedic skincare products like zero waste beauty products, edible beauty products, waterless beauty products and much more. We consider serving the best and presenting the superlative quality of natural products. Here’re some of the reasons to choose Aadhunik Ayurveda as a popular Ayurvedic Skincare manufacturer & exporter in India. Many Years of Experience Aadhunik Ayurveda has been making a wide range of Ayurvedic skincare products for companies across the globe for quite a few years. We have quite decades of experience in supplying a good range of ayurvedic & herbal skincare products to many brands. Our products are intended to offer tons of blessings to the customers, and therefore, they’re quite popular. We use our experience accurately to make a distinctive range of herbal skincare and beauty products as a prime Ayurvedic skincare manufacturer and supplier in India. Special Attention on the Client's Needs What makes us a renowned and most famous brand is the fact that we pay special attention to the needs and demands of each and every customer. We make separate strategies and plans for exclusive clients as we recognize that every business may have a different purpose and different expectations. The expectations and the purpose of the business have to be understood before manufacturing the skincare products for them. We have a specifically devoted team that meets the customers and knows their plans. Based on the key features, we made complete manufacturing strategies. We take the responsibility of only delivering the best and most efficient products to the clients. Whether you are looking to create high-quality manufacturing of ayurvedic skincare products. We guide our clients through the entire process and help them to establish a successful brand. We work with a team of experts who make sure that our provided natural skincare products meet the client’s expectations. What’s Makes Aadhunik Ayurveda No.1 Private Label Ayurvedic Skincare Product Manufacturer Aadhujik Ayurveda is a well-certified, licensed best Ayurvedic Skincare Products Manufacturer company in India. We come with close to decade’s experience, with an aim to serve the best in the market. Also, with the aid of serving the best products in the market, we’re preferred as the best manufacturer/producer for transparency and ethical business standards. We also provide contract manufacturing & third-party manufacturing services to our associates. In addition, the manufacturing unit of Aadhunik Ayurveda produces the best Organic Ayurvedic Skincare Products with the approval of USDA, GMP, ISO. Our Speciality Own world-class manufacturing line In-house high-tech lab Organic Certified Products Private Labelling/third party contract manufacturing Raw material collections
The Ultimate Guide to DIY PC Repair and Upgrades
Are you tired of dealing with a slow or malfunctioning computer? Do you want to save money on costly repairs and upgrades? Look no further than DIY PC repair and upgrades. Whether you're a beginner or an experienced tech enthusiast, this comprehensive guide will walk you through everything you need to know to diagnose and fix common computer issues, upgrade hardware components, and optimize your system for peak performance. From replacing a faulty hard drive to installing a new graphics card, our step-by-step instructions and helpful tips will empower you to take control of your computer and extend its lifespan. Say goodbye to frustrating tech support calls and hello to a more efficient and reliable PC. So grab your tools and get ready to unleash your inner tech wizard with the ultimate guide to DIY pc repair (pcreparasjon) and upgrades. Why DIY PC maintenance and upgrades are important Computers are essential to our daily lives; we rely on them for work and entertainment. However, they can also be frustrating when they slow down or malfunction. Regular maintenance and upgrades are crucial to running your computer smoothly and avoiding costly repairs. DIY PC maintenance and promotions not only save you money but also give you a better understanding of how your computer works. This knowledge can help you diagnose and fix issues quickly and prevent future problems. Common computer issues and how to diagnose them There are several common computer issues that you may encounter, such as slow performance, freezing, crashes, and error messages. Several factors, including software conflicts, malware, hardware failure, or outdated drivers, can cause these issues. Diagnosing the problem is the first step in fixing it. One way to analyze the event is using the Windows Event Viewer to check for error messages. Another way is to use the built-in Windows troubleshooting tools, such as the System File Checker and the Disk Cleanup tool. Finally, if you still have issues, you can use third-party diagnostic tools, such as PC Check or Speccy, to identify the problem. Tools needed for DIY PC maintenance and upgrades Before you start any DIY PC maintenance or upgrades, you'll need the right tools. The essential DIY PC maintenance and upgrade tools include a screwdriver set, thermal paste, compressed air, an antistatic mat, and an antistatic wrist strap. A screwdriver set is necessary to remove and install hardware components, while thermal paste transfers heat from the CPU to the heatsink. Compressed air is used to clean out dust and debris inside your computer, while an antistatic mat and wrist strap help prevent static electricity from damaging your components. Upgrading hardware components – RAM, hard drive, graphics card, etc. Upgrading hardware components is one of the most common DIY PC maintenance tasks. Upgrading RAM, hard drives, and graphics cards can significantly improve your computer's performance. Upgrading RAM is an easy and cost-effective way to boost your computer's speed while upgrading your hard drive to an SSD can significantly reduce boot and load times. Upgrading your graphics card can improve your computer's gaming performance and enable you to run more demanding applications. When upgrading hardware components, ensuring they are compatible with your computer's motherboard and power supply is essential. Cleaning your PC – hardware, and software Dust or debris can accumulate inside your computer, leading to overheating and decreased performance. Cleaning your PC is an essential part of DIY PC maintenance. To clean the inside of your computer, use compressed air to blow out any dust and/or debris from the fans, heatsinks, and other components. You can also remove the components and clean them individually. To clean your computer's software, run disk cleanup and defragmentation to free up space on your hard drive and improve performance. Optimizing your PC for peak performance – defragmentation, disk cleanup, etc. Optimizing your PC for peak performance is another crucial DIY PC maintenance task. This involves performing regular disk cleanups, defragmenting your hard drive, updating drivers and software, and disabling unnecessary startup programs. Disk cleanup and defragmentation free up space and organize data on your hard drive while updating drivers and software improves stability and security. In addition, disabling unnecessary startup programs can improve boot times and reduce system resource usage. Troubleshooting tips and tricks Sometimes, despite your best efforts, your computer may still need help with issues. Knowing some troubleshooting tips and tricks can help you quickly identify and fix the problem. Some common troubleshooting tips include checking for loose connections, reinstalling drivers, and running a virus scan. Restoring your system to a previous state or performing a clean install of Windows can also help fix persistent issues. DIY PC maintenance and upgrade resources – forums, websites, etc. Several online resources help you with DIY PC maintenance and upgrades. Forums like Tom's Hardware and Reddit's r/buildapc are excellent places to ask for advice and troubleshoot issues. Websites like PCPartPicker and Newegg can help you find compatible hardware components and compare prices. YouTube channels, such as Linus Tech Tips and JayzTwoCents, provide tutorials and reviews on hardware components and DIY PC maintenance.
Best IT training and placement institute in Nagpur
Skilocode is a leading IT training and placement institute based in Nagpur that has earned a reputation for providing top-notch training and placement services to students and professionals. With its comprehensive curriculum, experienced trainers, and industry-relevant courses, Skilocode has emerged as the go-to destination for anyone looking to enhance their IT skills and land their dream job. here is the list of some IT courses · Spring boot microservices · Java full-stack development · Python Programming · AWS · Selenium · Salesforce · DevOps In addition to its comprehensive training programs, Skilocode also offers placement assistance to its students. The institute has a dedicated placement cell that works tirelessly to connect students with job opportunities that match their skill sets and career goals. The placement cell has a wide network of industry contacts and works closely with leading IT companies in the region to provide students with the best job opportunities.
How to Watch Evil Dead Rise on HBO Max From Anywhere [2023]
Do you wish to watch Evil Dead Rise on HBO Max from anywhere easily? Well, we have the easiest solution for you! This article will give you all the details you need to watch Evil Dead Rise on HBO Max from anywhere. The director of Evil Dead Rise, Lee Cronin, is providing a positive update for the horror movie’s premiere despite a lot of HBO Max changes. Following 2019’s The Hole in the Ground, which received overwhelmingly positive reviews from critics and caused Sam Raimi to personally choose the Irish director to assume the helm for the movie, the most recent entry in the Sam Raimi-founded franchise represents Cronin’s second feature directorial effort. You can watch Evil Dead Rise on HBO Max using a VPN if you are not located inside the US. Follow below quick steps to unblock HBO Max outside the US.https://www.karookeen.com/watch-evil-dead-rise-on-hbo-max/
Ofertasya- Reparación De Computadoras En Santo Domingo
Reparacion de computadoras en santodo mingo - Encuentra los mejores servicios de reparación de computadoras en santodo mingo en Ofertasya.net. Contactanos- admin@servidescuento.com LR Jack of all trades - Manitas Descripción Construcción Contamos con más de 30 años de experiencia en la construcción de obras civiles. Supervisión De task tipo de proyectos, con la calidad y la garantía que nuestros clientes necesitan. Planificación Planificámos, organizamos y administramos tu proyecto para lograr el objetivo con city hall leader ef Ciudad All Urban communities Todas Las Provincias,Azua,Barahona,Duarte,El Seibo,Espaillat,Hato Mayor,Hermanas Mirabal,La Altagracia,La Romana,La Vega,María Trinidad Sánchez,Monseñor Nouel,Monte P lata,Peravia,Puerto Plata,Samaná,San Cristóbal,San José de Ocoa,San Juan,San Pedro Macorís,Sánchez Ramírez,Santiago,Santiago Rodríguez,Santo Domingo,Valverde Mantenimiento Para Aire Condicionado Descripción Incluye: MANTENIMIENTO Proficient PARA AIRE CONDICIONADO Hacemos la mejor limpieza a task tipo de aires Acondicionados, asesoramos al cliente con respecto al cuido del mismo, llámanos y reserva tu cita con anticipo, si realizas Dos o más servicios al mismo tiempo obtienes descuento particular. reparacion de computador Recuerda la salud no tiene precio, cuídate a ti y a los tuyos, mantén tu ambiente limpio. Información Adicional: Servicio a domicilio Servicios Audio Y Video | Desabolladura y Pintura | Grua | Auto Detailing | Mecanico | Gomeras | Alineamiento y Balanceo | Car wash | Frenos y Aceite | Otros | Depilación | Manicurísta | Estilista | Spa y Masajes | Barbero / Peluquero | Otros | Desarrollo De Software | Desarollo de Aplicaciones Móviles | Mercadeo Digital | Diseño Gráfico | Traduccion | Desarrollo Web | Otros | Limpieza de Piscina | Limpieza General | Limpieza de Alfombra | Servio de Lavandería | Otros | Albañilería | Carpintería | Cerrajería | Electricidad | Fumigación | Jardinería | Pintura | Plomería | Tapicería | Techos | Constructoras | Piscina | Ebanista | Pisos | Ayudantes | Handyman | Herreria | Otros | Alarma & Camaras | Cine en casa | Reparacion De Celulares | Reparacion De Electrodomesticos | Reparación de Computadoras | Servicio IT | Otros | Bus | Mensajerías | Mudanzas y Acarreos | Taxi Privado | Recoleccion de Basura | Otros | Arte, música, baile | Clases de música | Clases privadas | Clases de deporte | Postgrados, Maestrías, MBA | Idiomas | Clases de informática | Clases de computación | Otros Cursos | ️ Website: - https://ofertasya.net/provider-search/Santo%20Domingo/Reparaci%C3%B3n%20de%20Computadoras Please visit: - https://ofertasya-net.blogspot.com/2023/03/desarrollo-de-software-en.html And find details more on this
2023 Latest Braindump2go 300-410 PDF Dumps(Q354-Q400)
QUESTION 354 What is the function of BFD? A.It provides uniform failure detection regardless of media type. B.It creates high CPU utilization on hardware deployments. C.It negotiates to the highest version if the neighbor version differs. D.It provides uniform failure detection on the same media type. Answer: A QUESTION 355 Refer to the exhibit. A network engineer must establish communication between three different customer sites with these requirements: * Site-A: must be restricted to access to any users at Site-B or Site-C. * Site-B and Site-C: must be able to communicate between sites and share routes using OSPF. PE interface configuration: interface FastEthernet0/0 ip vrf forwarding Site-A ! interface FastEthernet0/1 ip vrf forwarding SharedSites ! interface FastEthernet0/2 ip vrf forwarding SharedSites Which configuration meets the requirements? A.PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 10 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 1 B.PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 20 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 1 C.PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 10 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 D.PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 20 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 Answer: C QUESTION 356 Refer to the exhibit. Site1 must perform unequal cost load balancing toward the segments behind Site2 and Site3. Some of the routes are getting load balanced but others are not. Which configuration allows Site1 to load balance toward all the LAN segments of the remote routers? A.Site3 router eigrp 100 variance 2 B.Site2 router eigrp 100 variance 2 C.Site2 router eigrp 100 variance 3 D.Site1 router eigrp 100 variance 3 Answer: D QUESTION 357 Refer to the exhibit. An engineer implemented an access list on R1 to allow anyone to Telnet except R2 Loopback0 to R1 Loopback4. How must sequence 20 be replaced on the R1 access list to resolve the issue? A.sequence 20 permit tcp host 1001:ABC:2011:7::1 host 400A:0:400C::1 eq telnet B.sequence 20 deny tcp host 400A:0:400C::1 host 1001:ABC:2011:7::1 eq telnet C.sequence 20 permit tcp host 400A:0:400C::1 host 1001:ABC:2011:7::1 eq telnet D.sequence 20 deny tcp host 1001:ABC:2011:7::1 host 400A:0:400C::1 eq telnet Answer: D QUESTION 358 An engineer notices that R1 does not hold enough log messages to Identity the root cause during troubleshooting. Which command resolves this issue? A.#logging buffered 4096 critical B.(config)#logging buffered 16000 informational C.#logging buffered 16000 critical D.(config)#logging buffered 4096 informational Answer: B QUESTION 359 Refer to the Exhibit. R1 and R2 use IGP protocol to route traffic between AS 100 and AS 200 despite being configured to use BGP. Which action resolves the issue and ensures the use of BGP? A.Configure distance to 100 under the EIGRP process of R1 and R2. B.Remove distance commands under BGP AS 100 and AS 200. C.Remove distance commands under BGP AS 100. D.Configure distance to 100 under the OSPF process of R1 and R2 Answer: B QUESTION 360 Refer to the exhibit. An engineer is trying to connect to R1 via Telnet with no success. Which configuration resolves the issue? A.tacacs server prod address ipv4 10.221.10.10 exit B.ip route 10.221.10.10 255.255.255.255 ethernet 0/1 C.tacacs server prod address ipv4 10.221.10.11 exit D.ip route 10.221.0.11 255.255.255.255 ethernet 0/1 Answer: B QUESTION 361 Refer to the exhibit. An engineer must configure PBR on R1 to reach to 10.2.2.0/24 via R3 AS64513 as the primary path and a backup route through default route via R2 AS64513. All BGP routes are in the routing table of R1, but a static default route overrides BGP routes. Which PBR configuration achieves the objective? A.access-list 100 permit ip 10.1.1.0 0.0.0.255 10.2.2.0 0.0.0.255 ! route-map PBR permit 10 match ip address 100 set ip next-hop 10.3.3.1 B.access-list 100 permit ip 10.1.1.0 0.0.0.255 10.2.2.0 0.0.0.255 ! route-map PBR permit 10 match ip address 100 set ip next-hop recursive 10.3.3.1 C.access-list 100 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0 ! route-map PBR permit 10 match ip address 100 set ip next-hop recursive 10.3.3.1 D.access-list 100 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0 ! route-map PBR permit 10 match ip address 100 set ip next-hop 10.3.3.1 Answer: B QUESTION 362 Refer to the exhibit. An administrator configured a Cisco router for TACACS authentication, but the router is using the local enable password instead. Which action resolves the issue? A.Configure the aaa authentication login default group admin local if-authenticated command instead. B.Configure the aaa authentication login admin group tacacs+ local enable none command instead. C.Configure the aaa authentication login admin group tacacs+ local if-authenticated command instead. D.Configure the aaa authentication login admin group admin local enable command instead. Answer: D QUESTION 363 How do devices operate in MPLS L3VPN topology? A.P and associated PE routers with IGP populate the VRF table in different VPNs. B.CE routers connect to the provider network and perform LSP functionality C.P routers provide connectivity between PE devices with MPLS switching. D.P routers support PE to PE VPN tunnel without LSP functionality Answer: C QUESTION 364 What is LDP label binding? A.neighboring router with label B.source prefix with label C.destination prefix with label D.two routers with label distribution session Answer: C QUESTION 365 Which table is used to map the packets in an MPLS LSP that exit from the same interface, via the same next hop, and have the same queuing policies? A.RIB B.FEC C.LDP D.CEF Answer: B Explanation: A forwarding equivalence class (FEC) is a term used in Multiprotocol Label Switching (MPLS) to describe a set of packets with similar or identical characteristics which may be forwarded the same way; that is, they may be bound to the same MPLS label. QUESTION 366 Refer to the exhibit. The IT router has been configured with the Science VRF and the interfaces have been assigned to the VRF. Which set of configurations advertises Science-1 and Science-2 routes using EIGRPAS 111? A.router eigrp 111 address-family ipv4 vrf Science autonomous-system 1 network 192.168.1.0 network 192.168.2.0 B.router eigrp 111 address-family ipv4 vrf Science network 192.168.1.0 network 192.168.2.0 C.router eigrp 111 network 192.168.1.0 network 192.168.2.0 D.router eigrp 1 address-family ipv4 vrf Science autonomous-system 111 network 192.168.1.0 network 192.168.2.0 Answer: D QUESTION 367 Refer to the exhibit. When an FTP client attempts to use passive FTP to connect to the FTP server, the file transfers fail Which action resolves the issue? A.Configure active FTP traffic. B.Modify FTP-SERVER access list to remove established at the end. C.Modify traffic filter FTP-SERVER in to the outbound direction. D.Configure to permit TCP ports higher than 1023. Answer: D QUESTION 368 In a DMVPN network, the Spoke1 user observed that the voice traffic is coming to Spoke2 users via the hub router. Which command is required on both spoke routers to communicate directly to one another? A.ip nhrp map dynamic B.ip nhrp shortcut C.ip nhrp nhs multicast D.ip nhrp redirect Answer: B QUESTION 369 Refer to the exhibit. The network administrator configured the network to establish connectivity between all devices and notices that the ASBRs do not have routes for each other. Which set of configurations resolves this issue? RR Configuration: router bgp 100 neighbor IBGP peer-group neighbor IBGP route-reflector-client neighbor 10.1.1.1 remote-as 100 neighbor 10.1.2.2 remote-as 100 neighbor 10.1.3.3 remote-as 100 A.router bgp 100 neighbor IBGP update-source Loopback0 B.router bgp 100 neighbor IBGP next-hop-self C.router bgp 100 neighbor 10.1.1.1 next-hop-self neighbor 10.1.2.2 next-hop-self neighbor 10.1.3.3 next-hop-self D.router bgp 100 neighbor 10.1.1.1 peer-group IBGP neighbor 10.1.2.2 peer-group IBGP neighbor 10.1.3.3 peer-group IBGP Answer: D QUESTION 370 Refer to the exhibit. The network administrator configured the Chicago router to mutually redistribute the LA and NewYork routes with OSPF routes to be summarized as a single route in EIGRP using the longest summary mask: router eigrp 100 redistribute ospf 1 metric 10 10 10 10 10 router ospf 1 redistribute eigrp 100 subnets ! interface E 0/0 ip summary-address eigrp 100 172.16.0.0 255.255.0.0 After the configuration, the New York router receives all the specific LA routes but the summary route. Which set of configurations resolves the issue on the Chicago router? A.interface E 0/1 ip summary-address eigrp 100 172.16.0.0 255.255.0.0 B.interface E 0/1 ip summary-address eigrp 100 172.16.8.0 255.255.252.0 C.router eigrp 100 summary-address 172.16.8.0 255.255.252.0 D.router eigrp 100 summary-address 172.16.0.0 255.255.0.0 Answer: B QUESTION 371 Refer to the exhibit. An engineer must configure DMVPN Phase 3 hub-and-spoke topology to enable a spoke-to-spoke tunnel. Which NHRP configuration meets the requirement on R6? A.interface Tunnel 1 ip address 192.168.1.1 255.255.255.0 tunnel source e 0/0 tunnel mode gre multipoint ip nhrp network-id 1 B.interface Tunnel1 ip nhrp authentication Cisco123 ip nhrp map multicast dynamic ip nhrp network-id 1 ip nhrp holdtime 300 ip nhrp redirect C.interface Tunnel1 ip nhrp authentication Cisco123 ip nhrp map multicast dynamic ip nhrp network-id 1 ip nhrp holdtime 300 ip nhrp shortcut D.interface Tunnel 1 ip address 192.168.1.1 255.255.255.0 tunnel source e 0/1 tunnel mode gre multipoint ip nhrp network-id 1 ip nhrp map 192.168.1.2 192.1.20.2 Answer: B QUESTION 372 Refer to the exhibit. An engineer implemented CoPP to limit Telnet traffic to protect the router CPU. It was noticed that the Telnet traffic did not pass through CoPP. Which configuration resolves the issue? A.policy-map COPP class TELNET police 8000 conform-action transmit exceed-action transmit B.policy-map COPP class TELNET police 8000 conform-action transmit exceed-action transmit violate-action drop C.ip access-list extended TELNET permit tcp host 10.2.2.1 host 10.2.2.4 eq telnet permit tcp host 10.1.1.1 host 10.1.1.3 eq telnet D.ip access-list extended TELNET permit tcp host 10.2.2.4 host 10.2.2.1 eq telnet permit tcp host 10.1.1.3 host 10.1.1.1 eq telnet Answer: D QUESTION 373 Refer to the exhibit. An engineer implemented CoPP but did not see OSPF traffic going through it. Which configuration resolves the issue? A.ip access-list extended OSFP permit ospf any any B.policy-map COPP class OSFP police 8000 conform-action transmit exceed-action transmit violate-action drop C.control-plane service-policy input COPP D.class-map match-all OSFP match access-group name OSFP Answer: A QUESTION 374 An engineer must override the normal routing behavior of a router for Telnet traffic that is destined to 10.10.10.10 from 10.10.1.0/24 via a next hop of 10.4.4.4 which is directly connected to the router that is connected to the 10.1.1.0/24 subnet. Which configuration reroutes traffic according to this requirement? A.Option A B.Option B C.Option C D.Option D Answer: B QUESTION 375 Refer to the exhibit. An engineer must redistribute networks 192.168.10.0/24 and 192.168.20.0/24 into OSPF from EIGRP. Where the metric must be added when traversing through multiple hops to start an external route of 20. The engineer notices that the external metric is fixed and does not add at each hop. Which configuration resolves the issue? A.R2(config)#access-list 10 permit 192.168.10.0 0.0.0.255 R2(config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R2(config)#route-map RD permit 10 R2(config-route-map)#match ip address 10 R2(config-route-map)#set metric 20 R2(config-route-map)#set metric-type type-2 ! R2(config)#router ospf 10 R2(confjg-router)#redistribute eigrp 10 subnets route-map RD B.R2(config)#access-list 10 permit 192.168.10.0 0.0.0.255 R2(config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R2(config)#route-map RD permit 10 R2(config-route-map)#match ip address 10 R2(config-route-map)#set metric 20 R2(config-route-map)#set metric-type type-1 ! R2(config)#router ospf 10 R2(config-router)#redistribute eigrp 10 subnets route-map RD C.R1(config)#access-list 10 permit 192.168.10.0 0.0.0.255 (config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R1(config)#route-map RD permit 10 R1(config-route-map)#match ip address 10 R1(config-route-map)#set metric 20 R1(config-route-map)#set metric-type type-1 ! R1(config)#router ospf 10 R1(config-router)#redistribute eigrp 10 subnets route-map RD D.R1(config)#access-list 10 permit 192.168.10.0 0.0.0.255 R1(config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R1(config)#route-map RD permit 10 R1(config-route-map)#match ip address 10 R1(config-route-map)#set metric 20 R1(config-route-map)#set metric-type type-2 ! R1(config)#router ospf 10 R1(config-router)#redistribute eigrp 10 subnets route-map RD Answer: B 2023 Latest Braindump2go 300-410 PDF and 300-410 VCE Dumps Free Share: https://drive.google.com/drive/folders/1NkZ6PH5JebhsyHrMEXD3IWxkOLRjQ-B-?usp=sharing
2023 Latest Braindump2go 300-420 PDF Dumps(Q76-Q120)
QUESTION 76 How do endpoints inside an SD-Access network reach resources outside the fabric? A.a VRF fusion router is used to map resources in one VN to another VN B.Fabric borders use VRFs to map VNs to VRFs C.SD-Access transit links are used to transport encapsulated traffic from one fabric to another D.A fabric edge is used to de-encapsulate VXLAN traffic to normal IP traffic then transported over the outside network Answer: B Explanation: Fabric border routers handle the ingress & egress traffic for the SD-Access fabric, they are responsible for translating the policy, VRF & SGT information between the SD-Access fabric and the external networks. QUESTION 77 Which three pieces of information are carried on OSPF type 3 LSAs? (Choose three) A.metric B.authentication type C.link state D.IP subnet E.external route tag F.subnet mask Answer: ADF QUESTION 78 Which two statements about DMVPN with NHRP are true? (Choose two) A.NHRP shortens the configuration of the hub router. B.NHRP dynamically provides information about the spoke routers to the hub. C.NHRP disables multicast D.The hub router uses NHRP to initiate the GRE tunnel with spokes. E.The spoke routers act as the NHRP servers. Answer: AB QUESTION 79 In a simple MPLS L3VPN, which two tasks are performed by the PE router? (Choose two.) A.It establishes pseudo wires with other PEs. B.It exchanges VPNv4 and VPNv6 routes with CE Devices. C.It assigns labels to routes in individual VPNs. D.It forwards labeled packets to CE devices. E.It exchanges VPNv4 or VPNv6 route with other PE routers. Answer: CE QUESTION 80 Refer to the exhibit. Which action would make the router the active VRRP router? A.Recover interface Serial 1/0. B.Increase priority in the configuration to 100. C.Change the interface tracking priority to 100. D.Recover interface Serial 1/1. Answer: A QUESTION 81 Which design principle involves redundancy through hardware, software, and connectivity? A.Performance B.Security C.Scalability D.High availability Answer: D QUESTION 82 NAT-PT translates between what address types? A.RFC 1918 private addresses and public IPv4 addresses B.IPv4 and IPv6 addresses C.Network addresses and IPv6 ports D.Private IPv6 addresses and public IPv6 addresses Answer: B QUESTION 83 By default, if IS-IS is enabled on all routers, and this is an IPv6 network, what path is taken? A.Path 1 B.Path 2 C.Unequal-cost load balancing with Path 1 and Path 2 D.Equal-cost load balancing with Path 1 and Path 2 Answer: A QUESTION 84 How many host addresses are available with a Class B network with the default mask? A.63,998 B.64,QQQ C.65,534 D.65,536 Answer: C QUESTION 85 A packet sent to a multicast address reaches what destinations? A.The nearest destination in a set of hosts B.All destinations in a set of hosts C.All hosts D.Reserved global destinations Answer: B QUESTION 86 What does a hierarchical EIGRP design help with? (Choose two.) A.Redistribution B.Route summarization C.Faster convergence D.Load balancing Answer: BC QUESTION 87 During the integration of ISE and DNA Center, which of the following are used to establish trust through ISE? A.REST APIs B.pxGRID services C.Scalable groups D.SGACLs Answer: B QUESTION 88 In IS-IS networks, the backup designated router (BDR) forms adjacencies to what router or routers? A.It forms an adjacency only with the DR B.It forms adjacencies with all routers C.The BDR only becomes adjacent when the DR is down D.There is no BDR in IS-IS Answer: D QUESTION 89 You need to connect sites that are 8 kilometers apart by using fiber. Which media do you recommend? A.10GBASE-T B.10GBASE-ER C.10GBASE-LR D.10GBASE-SR Answer: C QUESTION 90 The customization of routing decisions is an example of which policy type? A.Centralized control policy B.Centralized data Policy C.Localized data policy D.Localized control policy Answer: A QUESTION 91 A client is moving to Model-Driven Telemetry and requires periodic updates. What must the network architect consider with this design? A.Updates that contain changes within the data are sent only when changes occur. B.Empty data subscriptions do not generate empty update notifications. C.Periodic updates include a full copy of the data that is subscribed to. D.The primary push update is sent immediately and cannot be delayed. Answer: C QUESTION 92 An architect is designing a multicast solution for a network that contains over 100 routers. The architect plans to create several multicast domains and balance the PIM-SM traffic within the network. Which technology should the architect include in the design? A.DVMRP B.IGMP C.MOSPF D.MSDP Answer: D QUESTION 93 An architect is designing a network that will utilize the spanning tree protocol to ensure a loop-free topology. The network will support an engineering environment where it is necessary for end users to connect their own network switches for testing purposes. Which feature should the architect include in the design to ensure the spanning tree topology is not affected by these rogue switches? A.BPDU Skew Detection B.BPDU guard C.loop guard D.root guard Answer: D QUESTION 94 An engineer is designing a Layer 3 campus network running EIGRP between the core, aggregation, and access layers. The access layer switches will be connected to the aggregation layer using Layer 3 copper connections. The engineer wants to improve convergence time for access layer switch failures. Which technique must the design include? A.enabling BFD for EIGRP on the access layer uplinks B.reducing the EIGRP Hello / Hold timer values C.EIGRP summarization from core to aggregation layer D.EIGRP summarization from access to aggregation layer Answer: A QUESTION 95 An engineer must design a solution to provide backup connectivity between two sites. The engineer plans to use an Internet connection but company policy requires the connection to be encrypted. Additionally, there are several applications that utilize multicast to deliver video streams between the sites. Which technology should the design include? A.GRE over IPsec B.IPsec direct encapsulation C.GETVPN D.DMVPN Answer: A QUESTION 96 An existing network solution is using BFD in echo mode. Several of the network devices are experiencing high CPU utilization which an engineer has determined is related to the BFD feature. Which solution should the engineer leverage to reduce the CPU load? A.Implement slow timers between peers with low CPU resources. B.Implement BED asynchronous mode between peers with low CPU resources. C.Enable BFD multi-hop on the devices with low CPU resources. D.Utilize carrier delay on all routers in the network. Answer: A QUESTION 97 Refer to the exhibit. An engineer is designing a BGP solution for a client that peers with ISP1 for full Internet connectivity and with ISP2 for direct exchange of routes for several third parties. Which action, when implemented on the edge routers, enables the client network to reach the Internet through ISP1? A.Run an eBGP session within different VRFs for each ISP. B.Advertise a default route for downstream routers within the client network. C.Apply the AS path prepend feature for ISP2. D.Apply route filtering such that the client advertises only routes originated from its own AS. Answer: B QUESTION 98 An architect is working on a design to connect a company's main site to several small to medium- sized remote branches. The solution must include redundant WAN links, but the customer has a limited budget and wants the ability to increase the link speed easily in the future. QoS will not on the branch routers so there is no need for consistent end-to-end QoS. Which solution does the architect propose? A.dual-homed WAN MPLS with single edge router B.dual-homed Internet with a single edge router running a site-to-site VPN topology C.dual-homed WAN MPLS and Internet links via dual edge routers D.dual-homed Internet with dual edge routers running a hub-and-spoke VPN topology Answer: D QUESTION 99 Refer to the exhibit. An architect must design an IP addressing scheme for a multisite network connected via a WAN transit. The campus site must accommodate 12,000 devices and the branch sites must accommodate 1,000 devices. Which address scheme optimizes network device resources, contains convergence events to the different blocks of the network, and ensures future growth of the network? A.Campus: 10.0.0.0/18 Branch1: 10.0.192.0/21 Branch2: 10.0.200.0/21 B.Campus: 10.0.0.0/16 Branch1: 10.255.0.0/20 Branch2: 10.255.16.0/20 C.Campus: 10.0.0.0/10 Branch1: 10.64.0.0/10 Branch2: 10.128.0.0/10 D.Campus: 10.0.0.0/20 Branch1: 10.0.64.0/21 Branch2: 10.0.128.0/21 Answer: A QUESTION 100 An engineer must design a solution to connect a customer to the Internet. The solution will include a Layer 3 circuit with a CIR of 50 Mbps from the service provider. The hand-off from the provider's switch to the customer's router is 1Gbps. Which solution should the engineer include to prevent potential issues with choppy voice traffic? A.Reduce the bandwidth of the connection to the router. B.Implement hierarchical QoS with a parent policing policy. C.Implement hierarchical QoS with a parent shaping policy D.Add a bandwidth statement to the router interface. Answer: C QUESTION 101 Refer to the exhibit. Customers report low video quality and delays when having point-to-point telepresence video calls between the two locations. An architect must optimize a design so that traffic follows the same path for egress and ingress traffic flows. Which technique optimizes the design? A.Configure route leaking on the router in area 2. B.Configure route leaking on he router in area 1. C.Configure the high metric on the router in area 4. D.Configure route filter on the router in area 4. Answer: A QUESTION 102 An engineer must design a scalable QoS architecture that allows the separation of the traffic into classes on predefined business requirements. The design must also utilize the differentiated services code points as the QoS priority descriptor value and support at least 10 levels of classification. Which QoS technology should the engineer include in the design? A.RSVP B.DiffSery C.Best Effort D.InterServ Answer: B QUESTION 103 Refer to the exhibit. Area 10 is a regular OSPF area and networks 10.1.1.0/24 and 172.16.1.0/24 are internal. Which design provides optimal routing between both networks when the link between routers C and E fails? A.Move the link between routers C and D to area 10. B.Create an OSPF virtual link between routers E and F. C.Create a tunnel between routers E and F in area 10. D.Make area 10 a not-so-stubby area. Answer: A QUESTION 104 An architect is creating a migration strategy for a large organization in which the choice made by the application between IPv6 and IPv4 is based on the DNS request. Which migration strategy does the architect choose? A.AFT for public web presence B.host-initiated tunnels C.dual stack D.site-to-site IPv6 over IPv4 tunnels Answer: C QUESTION 105 Refer to the exhibit. An engineer is designing an OSPF network for a client. Requirements dictate that the routers in Area 1 should receive all routes belonging to the network, including EIGRP, except the ones originated in the RIP domain. Which action should the engineer take? A.Make area 1 a NSSA. B.Make area 1 a stub. C.Make area 1 a standard OSPF area. D.Make the area 1 routers part of area 0. Answer: A QUESTION 106 An engineer must propose a solution for a campus network that includes the capability to create multiple Layer 3 virtual networks. Each network must have its own addressing structure and routing table for data forwarding. The solution must be scalable to support hundreds of virtual networks and allow simple configuration and management with minimal administrative overhead. Which solution does the engineer recommend? A.hop-by-hop EVN B.multihop MPLS core C.multihop IPsec tunneling D.hop-by-hop VRF-Lite Answer: D QUESTION 107 Refer to the exhibit. Which two solutions maximize the use of the links between the core and distribution layers? (Choose two.) A.use multiple equal-cost links B.use an IGP C.use HSRP D.use RPVSTP+ E.use multiple unequal-cost links Answer: AB QUESTION 108 An engineer is tasked with designing a dual BGP peering solution with a service provider. The design must meet these conditions: - The routers will not learn any prefix with a subnet mask greater than /24. - The routers will determine the routes to include in the routing table based on the length of the mask alone. - The routers will make this selection regardless of the service provider configuration. Which solution should the engineer include in the design? A.Use a route map and access list to block the desired networks, and apply the route map to BGP neighbors inbound. B.Use a route map and prefix list to block the desired networks, and apply the route map to BGP neighbors outbound. C.Use an IP prefix list to block the desired networks and apply the IP prefix list to BGP neighbors outbound. D.Use an IP prefix list to block the desired networks and apply the IP prefix list to BGP neighbors inbound. Answer: D QUESTION 109 An engineer is designing an EIGRP network for a small branch site where there is only one Layer 3 router. The engineer wants the router to advertise the local LAN network to remote EIGRP neighbors without sending any unnecessary multicast messages on the local LAN. Which action should the engineer take? A.Use a static default route for this site instead of EIGRP B.Advertise the local LAN using the network command and the passive-interface feature C.Redistribute the local LAN network using the redistribute connected command D.Advertise the local LAN subnet as a stub network Answer: B QUESTION 110 A network engineer is redesigning a company's QoS solution. The company is currently using IP Precedence, but the engineer plans to move to DiffServ. It is important that the new solution provide backward compatibility with the current solution. Which technology should the design include? A.expedited forwarding B.assured forwarding C.class selector code points D.default per hop behavior Answer: C QUESTION 111 A customer's current Layer 2 infrastructure is running Spanning Tree 802.1d, and all configuration changes are manually implemented on each switch. An architect must redesign the Layer 2 domain to achieve these goals: - reduce the impact of topology changes - reduce the time spent on network administration - reduce manual configuration errors Which two solutions should the architect include in the new design? (Choose two.) A.Implement Rapid PVST+ instead of STP. B.Implement MST instead of STP. C.Use VTP to propagate VLAN information and to prune unused VLANs. D.Configure broadcast and multicast storm control on all switches. E.Configure dynamic trunking protocol to propagate VLAN information. Answer: AC QUESTION 112 How is sub-second failure of a transport link detected in a Cisco SD-WAN network? A.Hellos are sent between the WAN Edge routers and the vSmart controller. B.BFD runs on the IPsec tunnels between WAN Edge routers. C.BGP is used between WAN Edge routers and the vSmart controller. D.Link state change messages are sent between vSmart controllers. Answer: B QUESTION 113 Refer to the exhibit. An architect must design a solution to connect the network behind R3 with the EIGRP network. Which mechanism should be included to avoid routing loops? A.down bit B.split horizon C.route tags D.summarization Answer: C QUESTION 114 Drag and Drop Question An engineer must design an addressing plan for a small business using a single /24 network. Each department must have its own subnet. Drag and drop the subnets from the left onto the departments requirements that they fulfill on the right. Not all options are used. Answer: QUESTION 115 Drag and Drop Question Drag and drop the characteristics from the left onto the Yang model they describe on the right. Answer: QUESTION 116 Drag and Drop Question Drag and drop the model driven telemetry characteristics from the left onto the mode they belong to on the right. Answer: QUESTION 117 A customer has several remote sites connected with their headquarters through microwave links. An engineer must propose a backup WAN solution based on these conditions: Which backup WAN link type the engineer recommend? A.LTE B.802.16 WiMAX C.Laser link D.802.15.1 Bluetooth Answer: A QUESTION 118 How is internet access provided to a WAN edge router that is connected to a MPLS transport link? A.OMP advertises a default route from a WAN Edge router that is connected to the MPLS and internet transport networks B.Internet access must be provided at the WAN Edge router through either a 4G/5G link or local Internet circuit C.An extranet must be provided in the MPLS transport network to allow private traffic to reach the public internet D.TLOC extensions are used to route traffic to a WAN Edge router that is connected to the Internet transport network Answer: D QUESTION 119 A network engineer must segregate three interconnected campus networks using IS-IS routing. A two-layer hierarchy must be used to support large routing domains and to avoid more specific routes from each campus network being advertised to other campus network routers automatically. Which two actions does the engineer take to accomplish this segregation? (Choose two.) A.Designate two IS-IS routers as BDR routers at the edge of each campus, and configure one BDR for all Level 1 routers and one BDR for all Level 2 routers. B.Designate two IS-IS routers from each campus to act as Level 1/Level 2 backbone routers at the edge of each campus network. C.Assign the same IS-IS NET value for each campus, and configure internal campus routers with Level 1/ Level 2 routing. D.Utilize different MTU values for each campus network segment. Level 2 backbone routers must utilize a larger MTU size of 9216. E.Assign a unique IS-IS NET value for each campus, and configure internal campus routers with Level 1 routing. Answer: BE QUESTION 120 Refer to the exhibit. All routers currently reside in OSPF area 0. The network manager recently used R1 and R2 as aggregation routers for remote branch locations and R3 and R4 for aggregation routers for remote office locations. The network has since been suffering from outages, which are causing frequent SPF runs. To enhance stability and introduce areas to the OSPF network with the minimal number of ABRs possible, which two solutions should the network manager recommend? (Choose two.) A.a new OSPF area for R1 and R2 connections, with R1 and R2 as ABRs B.a new OSPF area for R3 and R4 connections, with R5 and R6 as ABRs C.a new OSPF area for R3 and R4 connections, with R3 and R4 as ABRs D.a new OSPF area for R1, R2, R3, and R4 connections, with R1, R2, R3, and R4 as ABRs E.a new OSPF area for R1 and R2 connections, with R5 and R6 as ABRs Answer: BE 2023 Latest Braindump2go 300-420 PDF and 300-420 VCE Dumps Free Share: https://drive.google.com/drive/folders/1SXwfGxRyjBzcw1iBNd9T4FhKWBoH7WUo?usp=sharing
Should I buy a Flour mill or not?
https://www.youtube.com/watch?v=f0hTiDHvatc Should I buy a Flour mill or not? Should you choose to grind your own bran at home or buy industrial bran? #congtybinhminh #crusher #flourmill #channuoi #animalfeed #breeding #farmers
MIUI theme with obscene graffiti for Xiaomi and Redmi phones
Obscene graffiti MIUI Theme I have a new MIUI theme called Grotesque Graffiti that I would like to share with you today. By applying this theme, you can alter the appearance of your Xiaomi, Redmi or POCO phone, https://www.miuithemee.com/2023/03/obscene.html
(no title)
https://www.econease.com/2023/01/evolution-economic-thought-ancient-greek-philosophers-modern-day-feminist-ecological-economists.html
2023 Latest Braindump2go MB-500 PDF Dumps(Q107-Q141)
QUESTION 107 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are developing a form for Dynamics 365 Finance. You need to add a button that allows users to run a report. Solution: Create a command button and link the button to the report by using the button's object property. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 108 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system's current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 109 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system's current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 110 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system's current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 111 You have a table in which multiple properties must be changed. Multiple table properties are locked down at the base table and must not be overwritten. You need to modify the table properties by extending the table. Which table property can you populate in a table extension by using the property sheet? A.Primary index B.Created by C.Configuration key D.Table group Answer: B QUESTION 112 You are a Dynamics 365 Finance developer. You create a key performance indicator (KPI) that will enable users to be able to see the total sales per region. You create a tile named SalesRegion and link the KPI to the tile. You need to ensure that users can view this tile on a form in the user interface. What should you do? A.Create an extension of the form that will contain the new tile and KPI. Add the tile to the extended form. B.Open the form that will contain the new tile. Add the tile to the form. C.Create a new workspace. Add the KPI to the workspace from the user interface. Answer: A QUESTION 113 You are training a new Dynamics 365 Finance developer. You need to recommend where asynchronous integrations should be used instead of synchronous integrations. For which scenario should you recommend asynchronous integration? A.A warehouse wants to track movement of all inventory from scanners to the system. B.A retailer wants to ensure gift card balances are communicated back to the system from point of sale (POS) terminals in near real-time. C.A company uses an on-premises inventory management system that needs to receive sales order data every hour throughout the day. D.A service company needs workers to be able to access just-in-time inventory data from the field by using a third-party Software as a Service (SaaS) application to ensure they have parts to complete a service. Answer: C QUESTION 114 Drag and Drop Question You need to map the Dynamics 365 Finance components into the standard models. Which component belongs to which model? To answer, drag the appropriate models to the correct components. Each model may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 115 Hotspot Question You are a Dynamics 365 Finance developer. You have the following entities. You must create the required fields and relationships in the staging tables. You need to develop a composite entity that uses the OrderHeader and OrderLine entities. Which object should you use for each action? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 116 Hotspot Question A company has a cloud-based Dynamics 365 Finance environment and uses an e-commerce website for retail operations. The website has business to business (B2B) capabilities. The company uses a middleware integration tool to process data. You must create a batch job to automate some operations. The batch job must be able to process several thousand transactions in each run. You need to configure the environment. Which tools should you use? To answer, drag the appropriate tools to the correct requirements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 117 You are a Dynamics 365 Finance developer. You make changes to an existing custom class. The code comparison tool shows version conflicts between your version and the latest checked-in version of the custom class. In Visual Studio, you open the Source Control Explorer. You locate the latest changeset for the class and you open the changeset in Team Explorer. You need to compare the latest code that is in source control with the code that you created. Which option should you use? A.Compare with Workspace Version B.Compare with Previous Version C.View History D.Compare with Latest Version Answer: A QUESTION 118 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are adding a new field to the SalesTable form. You must use an extension to add a status field onto the form. You need to create the extension in the Application Object Tree (AOT) and add the extension to the demoExtensions model. Solution: Navigate to the Visual Studio user interface forms extensions section for the SalesTable form and create an extension. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 119 You are a Dynamics 365 Finance developer. You need to create an extension class. Which action should you perform? A.Decorate the class with the ExtensionOf attribute. B.Add the class buffer as the first parameter. C.Mark the class as public. D.Mark the class as private. Answer: A QUESTION 120 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an enumeration named truckStatus that has the following statuses: Empty Loaded Completed You have the following code: You need to extend this enumeration and add the following statuses to the enumeration: Quarantine, InTransit. You must then modify code that validates the switch statement. Solution: Add a post handler to the method that checks the enumeration and logic for your new enumeration values using a range comparison for your new values. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 121 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an enumeration named truckStatus that has the following statuses: Empty Loaded Completed You have the following code: You need to extend this enumeration and add the following statuses to the enumeration: Quarantine, InTransit. You must then modify code that validates the switch statement. Solution: Add a post handler to the method that checks the enumeration and logic for your new enumeration values using the integer value of the enumeration. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 122 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an enumeration named truckStatus that has the following statuses: Empty Loaded Completed You have the following code: You need to extend this enumeration and add the following statuses to the enumeration: Quarantine, InTransit. You must then modify code that validates the switch statement. Solution: Add a post handler to the method that checks the enumeration and logic for your new enumeration values using the enumeration value. Does the solution meet the goal? A.Yes B.No Answer: A QUESTION 123 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are adding a new field to the SalesTable form. You must use an extension to add a status field onto the form. You need to create the extension in the Application Object Tree (AOT) and add the extension to the demoExtensions model. Solution: Add a new form object to the project and name the form SalesTable.Extension. Does the solution meet the goal? A.Yes B.No Answer: B QUESTION 124 You have a table in which multiple properties must be changed. Multiple table properties are locked down at the base table and must not be overwritten. You need to modify the table properties by extending the table. Which table property can you populate in a table extension by using the property sheet? A.Created by B.Primary index C.Cache lookup D.Clustered index Answer: A QUESTION 125 You are Dynamics 365 Finance developer. You need to initialize an embedded Microsoft Power BI report. Which code segment should you add to the form initialization method? A.getPBIReportByResourceName(resourceName) B.initializeReportControl(WorkspaceName, FormGroup) C.importAndStoreReport(powerBIConfiguration, resourceName, isUpate) D.deployOrUpdateReport(powerBIConfiguration, reportName, resourceName) Answer: B QUESTION 126 You have a cloud-based Dynamics 365 Finance production environment. You need to access the data to create Microsoft Power BI reports for the business. What should you use? A.Power BI embedded B.views C.aggregate dimensions D.data entities Answer: D QUESTION 127 You create a bring your own database (BYOD) entity that includes four tables. You need to configure change tracking for specific fields in the entity. Which option should you enable? A.custom query B.entire entity C.entity export D.primary table Answer: A QUESTION 128 Hotspot Question A company plans to migrate purchase orders from an older system into Dynamics 365 Finance. You need to generate field mapping between the source and the target data structures. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 129 Hotspot Question A company requires a change to one of the base Microsoft SQL Server Reporting Services (SSRS) reports. The report must include a new field that automatically filters the report based on the user who opens the report. You need to add the new field as specified. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: Explanation: You need to duplicate the existing report, there is no way yet to extend the existing report yet. For RDL reports you have no other option than to make the modification to the base query in the Controller class, because there is no Data provider for RDL reports. For RDP reports I would do the modification in the Data provider since you already directly copy the data to the tmp table from there. QUESTION 130 Drag and Drop Question A company uses Dynamics 365 Supply Chain Management. You need to monitor system performance. Which tool should you use? To answer, drag the appropriate tools to the correct requirements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Answer: QUESTION 131 Drag and Drop Question A company implements Dynamics 365 finance and operations apps. You are developing code to consume OData service endpoints. You complete the application registration process and gather the details required to create a C# console application. You need to ensure that the console application interacts with Dynamics 365 Finance OData services. Which the actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 132 Hotspot Question A company is implementing Dynamics 365 Finance. Vendors receive a risk rating that is determined by their on-time delivery performance as well as their credit rating. You need to implement the following risk rating functionality: The risk rating must accompany the credit rating when the credit rating is used. The risk rating must be able to be used in other areas of the solution to determine processing outcomes. The risk rating must consist of the following values: 1 = Good 2 = Medium 3 = Risky The risk rating must be displayed in the Miscellaneous Details tab below the Credit Rating and Credit Limit fields in the Vendor form. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: QUESTION 133 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You must extend the class SalesLineType and add a new method that returns the day of week for the system’s current date as an integer value. You need to create a class that extends SalesLineType and adds the new method. Solution: You create the following code: Does the solution meet the goal? A.Yes B.No Answer: A Explanation: It extends the class _extendsion to SalesLineType. QUESTION 134 You are a Dynamics 365 Finance developer. You have the following Extended Data Types (EDTs): You plan to modify properties of the EDTs by using an extension. You need to determine which operations can be performed. Which operation is possible? A.Create an extension for AccountBase and decrease the field size. B.Create a derived EDT for AccountBase and increase the field size. C.Create an extension for AccountId and increase the field size. D.Create an extension for AccountBase and modify the Form Help property. Answer: D QUESTION 135 You are a Dynamics 365 Finance developer. You need to create an extension class. Which action should you perform? A.Mark the class as final. B.Add the class buffer as the first parameter. C.Add the suffix .extension to the file name. D.Add the suffix _myextension to the file name. Answer: A QUESTION 136 Drag and Drop Question You create a Visual Studio project named CustomerDetailUpdate. You must update data in a table named CustTable. You must be able to run the code from Visual Studio. In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 137 You create a new class. Class compilation must fail if a specific method in the source code is called. You need to mark the class with the appropriate attribute. Which attribute should you use? A.SysAppSecurityAttribute B.SysTestCategory C.SysObsoleteAttribute D.SysAttribute Answer: C QUESTION 138 You are Dynamics 365 Finance developer. You need to initialize an embedded Microsoft Power BI report. Which code segment should you add to the form initialization method? A.initializeReportControlInternal( powerBIConfiguration, reportParameters, reportControl, showError ) B.getPBIReportByResourceName( resourceName ) C.importAndStorageReport( powerBIConfiguration, resourceName, isUpdate ) D.initializeCustomReportControl( resourceName, formGroupControl, reportCustomParams Answer: D QUESTION 139 You are Dynamics 365 Finance developer. You need to initialize an embedded Microsoft Power BI report. Which code segment should you add to the form initialization method? A.initializeReportControlOnWorkspace(powerBIConfiguration, reportParameters, formGroupControl) B.importAndStorageReport(powerBIConfiguration, resourceName, isUpdate) C.initializeCustomReportControl(resourceName, formGroupControl, reportCustomParams) D.addReportControl (formGroupControl) Answer: C QUESTION 140 A company uses Dynamics 365 Finance. You have an entity named VendVendorV2Entity. You add a new column to the entity. You need to ensure that the new column is available in the entity for data transfer activity. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Select the Generate mapping button on the Mapping details form. B.Select the Validate button on the Entity list page. C.Select the Entity structure button on the Entity list page. D.Select the Modify target mapping button on the Entity list page. Answer: AB QUESTION 141 A company uses Dynamics 365 Finance. You ne lable when the sales representatives do not have internet access a cloud-hosted Tier-1 test environment that has Visual Studio installed. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A.Apply a deployment package B.Export the project as an .axpp file C.Create a deployment package D.Import the project into a cloud-hosted environment from an .axpp file and ensure that the Overwrite Elements option is selected Answer: BD 2023 Latest Braindump2go MB-500 PDF and MB-500 VCE Dumps Free Share: https://drive.google.com/drive/folders/1eBPhep3dQcxXcNjAUlm56nmtlPgT9iOR?usp=sharing
Hire Droidal - One Of The Leading RPA Solutions Provider In Dallas
Robotic Process Automation (RPA) It is the process of introducing software robots, also known as bots, into your business to perform manual and repetitive tasks in your workflow. These software bots can complete their tasks quickly, accurately, and effectively. They can carry out repetitive tasks like email parsing, file moving, web data scraping, calculations, etc. Benefits of RPA in Various Sectors The benefits of RPA solutions are not confined to a single sector but are beginning to be felt in all of them. Banking, healthcare, manufacturing, and insurance are among the industries most impacted by RPA. These software robots use the user interface in the same way that humans do to manipulate applications and collect data.  Benefits of RPA in Banking The banking industry has now found a reliable and secure way to manage its daily operations with the help of RPA. These software robots have cut down on human error in the banking industry. Implementing RPA has made possible the simplification of processes such as account opening, KYC, reports, ledgers, account closing, etc. Benefits of RPA in Healthcare RPA solutions have transformed the healthcare industry. The healthcare industry has a lot of data and is challenging to maintain. RPA has simplified a number of complex data-intensive processes, including Patient Data Management  Doctors Management Bill processing Insurance data automation Insurance claim processing Patient record storage Benefits Of RPA in manufacturing Physical robots have been used in the manufacturing sector for many years to assemble, test, and package goods. Although they have greatly aided in streamlining assembly lines, the industry has difficulty automating back-office procedures. Due to a large number of repetitive tasks and processes, it takes a lot of effort for them to operate quickly and efficiently. RPA integration into these processes has improved the productivity of the manufacturing industries. 1. Automation of logistics data 2. Data Monitoring  3. ERP Automation 4. Product pricing comparisons It is a fact that these software bots can simplify tiresome tasks and improves efficiency in your businesses. Hire the best RPA solutions provider who can provide you with all-encompassing RPA solutions if you want to automate your workflow. Droidal is one of the top RPA Companies in Dallas. We have helped various businesses to automate their workflow and have helped them improve their efficiency. Contact us to implement the best RPA solutions!
The Advantages of Using Bloom Hometech's CCTV Cameras for Your Surveillance Needs
CCTV cameras are a great investment if you want to enhance your home or business security. Among the numerous options available in the market, Bloom Hometech's CCTV cameras stand out. This article will discuss the advantages of using Bloom Hometech's CCTV cameras for your surveillance needs. Introduction to Bloom Hometech Bloom Hometech is a reputable manufacturer of smart security cameras. The company's products are designed to cater to both commercial and residential clients. Bloom Hometech's CCTV cameras feature advanced technology and superior hardware to ensure top-notch surveillance. Advantages of Using Bloom Hometech's CCTV Cameras High-Quality Footage Bloom Hometech's CCTV cameras capture footage in high resolution. The cameras feature lenses with increased pixels, enabling them to capture clear images and videos. The cameras' high-quality footage easily identifies intruders or other suspicious activities. Night Vision Bloom Hometech's CCTV cameras come with infrared sensors that enable them to capture footage in low-light conditions. With these cameras, you can rest assured that your property is under surveillance 24/7, even in the dark. Wide Viewing Angle Bloom Hometech's CCTV cameras come with wide viewing angles, allowing you to monitor a larger area with fewer cameras. This feature makes them an excellent choice for large properties where several cameras may be necessary. Easy to Install and Use Bloom Hometech's CCTV cameras are designed to be user-friendly. The cameras come with easy-to-follow installation instructions and can be set up in minutes. Additionally, the cameras can be accessed remotely via a mobile app, making monitoring your property from anywhere easy. Motion Detection Bloom Hometech's CCTV cameras come with motion detection technology that alerts you when there is movement on your property. This feature is particularly useful in detecting intruders or suspicious activity on your property. Cloud Storage Bloom Hometech's CCTV cameras have cloud storage options, enabling you to store footage remotely. This feature ensures you can access your footage, even if the cameras are damaged or stolen. Cost-Effective Bloom Hometech's CCTV cameras offer excellent value for money. They are competitively priced and require minimal maintenance, making them affordable for home and business owners. Excellent Customer Support Bloom Hometech offers excellent customer support to its clients. The company's knowledgeable customer service representatives can assist you with any issues with your CCTV cameras. Conclusion Bloom Hometech's CCTV cameras are an excellent investment for anyone looking to enhance their property's security. The cameras feature advanced technology, are easy to install and use, and offer excellent value for money. Additionally, Bloom Hometech provides exceptional customer support to ensure that you have a smooth experience with its products. FAQs Can I access Bloom Hometech's CCTV cameras remotely? Bloom Hometech's CCTV cameras can be accessed remotely via a mobile app. Do Bloom Hometech's CCTV cameras come with cloud storage options? Yes, Bloom Hometech's CCTV cameras have cloud storage options, allowing you to store footage remotely. Can Bloom Hometech's CCTV cameras capture footage in low light conditions? Yes, Bloom Hometech's CCTV cameras have infrared sensors that enable them to capture footage in common light conditions.
Jasa Kirim Ekspedisi ke Leihitu (0816267079)
Jasa Kirim Ekspedisi ke Leihitu merupakan perusahaan yang bergerak dibidang pengiriman barang dengan tujuan dari dan ke seluruh wilayah Indonesia. Logistik Express memiliki keunggulan pada tarif yang terjangkau serta pengiriman aman sampai alamat tujuan. Di era sekarang ini banyak dibutuhkan jasa pengiriman yang praktis dan dan efisien. Untuk itu Logistik Express hadir sebagai mitra pengiriman barang anda mulai dari paket kecil 30kg, 50kg, dan 100kg sampai hitungan tonase. Melayani pengiriman retail, LCL (Less Container Load), FCL (Full Container Load), dan sewa armada. MACAM MACAM ARMADA PENGIRIMAN 1. Via Udara : pengiriman barang cepat sampai 2. Via Laut : solusi pengiriman hemat 3. Via Darat : kirim barang cepat dan hemat Makin banyak makin murah ? Apanya, tuh ? Ya ongkos kirimnya, lah! Logistik Express Jasa Ekspedisi Ternate dan ke seluruh Indonesia menyediakan pengiriman barang dengan tarif yang murah. Tidak perlu khawatir sebanyak apapun barang kirimanmu, kirim pakai Logistik Express dijamin terjangkau. Mau kirim barang berat ? Atau barangnya ringan tapi makan tempat ? Logistik Express punya solusi, dong! Kantor cabang dan perwakilan yang tersebar di seluruh Indonesia akan semakin memudahkan untuk pengiriman barangmu. Pengiriman cukup di kota bahkan sampai pelosok pun Logistik Express akan siap sedia. Ingat Ongkir Murah, Ingat Logistik Express PEMESANAN LAYANAN CARGO KE LEIHITU LOGISTIK EXPRESS Hubungi Kami Untuk Konsultasi Dan Juga Layanan Kiriman Cargo Customer Service Yuni : 0816267079 Email : yuni.logistikexpress.id@gmail.com Ekspedisi Jakarta Leihitu, Maluku Tengah Ekspedisi Semarang Leihitu, Maluku Tengah Ekspedisi Surabaya Leihitu, Maluku Tengah Ekspedisi Bandung Leihitu, Maluku Tengah Ekspedisi Tangerang Leihitu, Maluku Tengah
The Important Considerations Before Investing in Mobile App Development
Developing a successful mobile app is not as easy as it sounds, and will require careful planning and execution. Before investing in a mobile app, ask yourself what you want to achieve and if the risks are worth the rewards. In this guide, we’ll cover essential considerations to help you make an informed decision on whether or not developing a mobile app is worth it. Conduct Market Research If you’re planning on investing in a mobile app, then one of the first steps is to conduct market research and analyze your competitors. This will give you an informed understanding of what type of apps are successful and how they can be applied to your idea. Take note of the trends that your competitors are engaging in as well as what product features and functionalities they are offering. This will help you refine your product’s design and ensure it stands out from the competition. Decide on a Platform and Device Type The next step when considering investing in a Mobile App Development is to decide which platform and device you would like it released on. While iOS is generally the preferred choice due to its high engagement rate, you should also consider launching your app on both Android and iOS platforms for greater reach. You should also research different devices – such as smartphones, tablets, or watches – that could help maximize the success of your app. Understanding which type of device will give you the best app experience is essential before investing in mobile app development. Read more:- Is Mobile App Development Worth It